Copy code from flash to ram in order to not use XIP allowing writing to flash memory while both cores are running;

Motor control now operates with two states/modes;
Extended Default CV Range to 1024 - refers to NMRA/RCN standards
This commit is contained in:
gab-k committed 2024-01-05 00:37:21 +01:00
1 parent 577bc5dd5c
commit f3ffb73b62
6 files changed
+738 -199

No files matched your search

+4 -2
View File
@@ -584,7 +584,7 @@ void cv_setup_check() {
program_mode(4, arr); //reset to CV_ARRAY_DEFAULT (write CV_8 = 8)
}
// Check for existing ADC offset setup
// Check for existing ADC offset setup TODO: always measure?
if (CV_ARRAY_FLASH[171] == 0xFF) {
// Write a value of 7 to read-only CV_7 in order to trigger a ADC offset measurement
LOG(1, "found cv[171] equals to 0xff, adc offset adjstments (and cr[7] = 7)\n");
@@ -594,6 +594,7 @@ void cv_setup_check() {
// Check for base PWM configuration - used for feed-forward
// Forward Direction
/*
if (get_16bit_CV(175) == 0) {
LOG(1, "found cv[175] equals to 0, forward direction\n");
const uint16_t base_pwm_fwd = measure_base_pwm(true, 10);
@@ -615,6 +616,7 @@ void cv_setup_check() {
const uint8_t arr1[4] = {125, base_pwm_rev_low_byte, 178, 124};
program_mode(4, arr1);
}
*/
LOG(1, "int_lim_max %d\n", CV_ARRAY_FLASH[51]);
LOG(1, "int_lim_min %d\n", CV_ARRAY_FLASH[52]);
}
@@ -666,5 +668,5 @@ int main() {
LOG(1, "core0 done\n");
busy_wait_ms(100);
multicore_launch_core1(core1_entry);
while (true);
while (true); //sleep_ms(100); //TODO: any potential issues when using sleep?
}