- Updated CMakeLists.txt and board config .h files

- Refactored core0.c to most functions are now static functions.
- Introduced new structures (`dcc_packet_t` and `dcc_ring_buffer_t`) for DCC packet data handling and packet detection.
- DCC pin interrupt now only does packet detection and no evaluation, evaluation is now done inside the main loop.
- Refactor message evaluation logic.
- Implemented hard fault handler, now rebooting when hardfault is encountered.
- Optimized initialization sequence in main().
- Controller and speed helper functions now run outside the timer interrupts, instead flags are set, which are checked inside the core1 main loop.
- Added enumeration for speed steps to improve readability. (However they are yet to be used)
- Added various documentation comments.
- Added various LOG() messages.
- Added python script for generating speed_step typedef definition.
This commit is contained in:
gab-k committed 2024-12-29 17:06:50 +01:00
1 parent acdbf3cffe
commit d970170795
10 files changed
+847 -300

No files matched your search

+48
View File
@@ -0,0 +1,48 @@
def print_speed_steps():
"""
This script generates and prints speed step definitions for both reverse and forward directions.
Functions:
print_speed_steps(): Generates and prints speed step definitions in hexadecimal and binary formats used in shared.h.
- Reverse speed steps range from 0x00 to 0x7F.
- Forward speed steps range from 0x80 to 0xFF.
* in NMRA Standard 9.2.1 section 2.3.2.1 or RCN-212 section 2.2.2.
*
* The following speed steps are defined:
*
* | DEC | BIN | DIRECTION | DEFINITION |
* |-----|-----------|-----------|----------------------|
* | 000 | 0000 0000 | Reverse | STOP |
* | 001 | 0000 0001 | Reverse | EMERGENCY STOP |
* | 002 | 0000 0010 | Reverse | Speed step 001 |
* | 003 | 0000 0011 | Reverse | Speed step 002 |
* | 004 | 0000 0100 | Reverse | Speed step 003 |
* | ... | .... .... | Reverse | ... |
* | 126 | 0111 1110 | Reverse | Speed step 125 |
* | 127 | 0111 1111 | Reverse | Speed step 126 |
* | 128 | 1000 0000 | Forward | STOP |
* | 129 | 1000 0001 | Forward | EMERGENCY STOP |
* | 130 | 1000 0010 | Forward | Speed step 001 |
* | 131 | 1000 0011 | Forward | Speed step 002 |
* | 132 | 1000 0100 | Forward | Speed step 003 |
* | ... | .... .... | Forward | ... |
* | 254 | 1111 1110 | Forward | Speed step 125 |
* | 255 | 1111 1111 | Forward | Speed step 126 |
"""
# Reverse speed steps
print(f"SPEED_STEP_REVERSE_STOP = 0x{0:02X}, // {0:08b}bin {0:03d}dec")
print(f"SPEED_STEP_REVERSE_EMERGENCY_STOP = 0x{1:02X}, // {1:08b}bin {1:03d}dec")
for i in range(1, 127):
print(f"SPEED_STEP_REVERSE_{i:03d} = 0x{i+1:02X}, // {i+1:08b}bin {i+1:03d}dec")
print("\n\n")
# Forward speed steps
print(f"SPEED_STEP_FORWARD_STOP = 0x{128:02X}, // {128:08b}bin {128:03d}dec")
print(f"SPEED_STEP_FORWARD_EMERGENCY_STOP = 0x{129:02X}, // {129:08b}bin {129:03d}dec")
for i in range(1, 127):
print(f"SPEED_STEP_FORWARD_{i:03d} = 0x{i+129:02X}, // {i+129:08b}bin {i+129:03d}dec")
# Call the function
print_speed_steps()