Update docs
This commit is contained in:
1 parent
72bd29ddbc
commit
c0f61511ce
9 files changed
+562
-8
No files matched your search
@@ -0,0 +1,14 @@
|
||||
# Troubleshooting
|
||||
|
||||
To narrow down the issue when your decoder is not working as expected, you can do the following:
|
||||
|
||||
Check the power supply of the decoder:
|
||||
* +3V3 to GND should be 3.3V
|
||||
* +V to GND should be somewhere in the range of around +10V to +20V
|
||||
* If you dont measure the correct voltages, try to [measure Track Voltage](https://dccwiki.com/Measuring_Track_Voltage)
|
||||
|
||||
Check your motor:
|
||||
* Desolder your motor and try the motor with a analog power supply 0...+-16V to check if the motor is working or not (desolder the wires because the decoder doesn't like voltage on these pins!)
|
||||
|
||||
Reset:
|
||||
* Try to reset the decoder by writing a value of 8 to CV8 (beware, this will reset the complete CV memory!)
|
||||
Reference in new issue
Block a user