Update docs
This commit is contained in:
1 parent
72bd29ddbc
commit
c0f61511ce
9 files changed
+562
-8
No files matched your search
@@ -0,0 +1,8 @@
|
||||
Hardware
|
||||
=================
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 2
|
||||
:caption: Contents:
|
||||
|
||||
hw_description
|
||||
@@ -0,0 +1,133 @@
|
||||
Hardware Description
|
||||
====================
|
||||
|
||||
Overview
|
||||
--------
|
||||
|
||||
.. image:: https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Block_Diagram.svg
|
||||
:alt: Block Diagram
|
||||
|
||||
The above block diagram gives a general overview regarding the operation of components. For better illustration it has been divided into four functional blocks. Furthermore, these functional blocks can be subdivided and will be explained below.
|
||||
|
||||
* **Input Stage**
|
||||
- DCC Signal Level Shift
|
||||
- Bridge Rectifier & Voltage Regulator
|
||||
* **Motor Driver**
|
||||
- Motor Driver
|
||||
- Back EMF measurement (ADC)
|
||||
* **General Purpose**
|
||||
- GPIO
|
||||
- Auxiliary output
|
||||
* **Microcontroller**
|
||||
- Flash memory
|
||||
- Crystal oscillator
|
||||
|
||||
Characteristics
|
||||
---------------
|
||||
.. table:: Characteristics table
|
||||
:widths: auto
|
||||
|
||||
===================================================== ============================= ========= ========= =====
|
||||
Parameter Symbol Minimum Maximum Unit
|
||||
===================================================== ============================= ========= ========= =====
|
||||
Absolute max. DCC Input Voltage V\ :sub:`DCC`\ -25 +25 V
|
||||
Absolute max. GPIO Voltage\ :sup:`(0)`\ V\ :sub:`PIN`\ -0.5 3.3+0.5 V
|
||||
Input Voltage High\ :sup:`(0)`\ V\ :sub:`IH`\ 2.145 3.6 V
|
||||
Input Voltage Low\ :sup:`(0)`\ V\ :sub:`IL`\ 0 1.155 V
|
||||
Total GPIO Current\ :sup:`(0)`\ I\ :sub:`IOVDD`\ 50 mA
|
||||
Absolute max. motor output current\ :sup:`(1)`\ I\ :sub:`MOTOR`\ 2.8 A
|
||||
Absolute max. auxiliary output current \ :sup:`(2)`\ I\ :sub:`AUX`\ 400 mA
|
||||
===================================================== ============================= ========= ========= =====
|
||||
|
||||
|
||||
(0): According to: `RP2040 Datasheet <https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf>`_ (assuming V\ :sub:`DD`\ = 3.3V)
|
||||
|
||||
(1): According to: `BDR6133 Datasheet <https://datasheet.lcsc.com/lcsc/2101211904_Bardeen-Micro--BDR6133_C2687793.pdf>`_
|
||||
|
||||
(2): According to: `T2N7002BK Datasheet <https://datasheet.lcsc.com/lcsc/1810271831_TOSHIBA-T2N7002BK-LM_C146372.pdf>`_
|
||||
|
||||
Input Stage
|
||||
-----------
|
||||
|
||||
.. image:: https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Input_Stage.svg
|
||||
:alt: Input Stage
|
||||
|
||||
D1 Rectifies the DCC square-wave into +V, the amplitude is not critical as long as it's within the 25V limit. The rectified voltage +V is then provided to the 3.3V voltage regulator (U1) and to the motor driver (U2).
|
||||
|
||||
The MOSFET on the right effectively translates the rather high DCC voltage to a suitable level for the microcontroller to process. When Q1 is turned off GPIO21 is pulled high by the RP2040 internal pull-up resistor, as soon as Q1 gets turned on (V<sub>GS</sub> > V<sub>GS,th</sub>), GPIO21 gets pulled to GND potential. R1 and R2 ensure that V<sub>GS</sub> doesn't exceed ±20V.
|
||||
|
||||
Motor Driver
|
||||
------------
|
||||
|
||||
.. image:: https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Motor_Driver.svg
|
||||
:alt: Motor Driver
|
||||
|
||||
The Motor Driver is a complete H-Bridge IC specifically made for DC-Motors.
|
||||
|
||||
In order to control the motor, it is necessary to measure the back-EMF. This is done by the ADC, which measures at Points ADC_EMF_A and ADC_EMF_B respectively. The two resistors are used as a voltage divider.
|
||||
|
||||
Auxiliary Output
|
||||
----------------
|
||||
|
||||
.. image:: https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Aux_Outputs.svg
|
||||
:alt: Auxiliary Output
|
||||
|
||||
Switching of loads up to a maximum of about ~400mA can be done using four N-Channel MOSFETs. They are switching on the low-side, which means the load effectively gets connected to GND potential as the transistor starts to conduct. GPIO24 - GPIO27 are used.
|
||||
|
||||
GPIO
|
||||
-----
|
||||
|
||||
To switch lighter loads, six soldering pads on the back side of the PCB are connected to GPIO0 - GPIO5 pins. Although not implemented yet, they could theoretically be used as inputs as well (e.g., Reed switch).
|
||||
|
||||
Microcontroller
|
||||
---------------
|
||||
|
||||
.. image:: https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Microcontroller.svg
|
||||
:alt: Microcontroller
|
||||
|
||||
The Microcontroller needs a crystal oscillator to function properly. External flash memory is also needed as it holds the configuration variables and the program itself. R3 & C14 are used to filter ADC_AVDD (ADC Reference Voltage).
|
||||
|
||||
Complete Schematic
|
||||
------------------
|
||||
|
||||
.. image:: https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/RP2040-Decoder.svg
|
||||
:alt: Complete Schematic
|
||||
|
||||
|
||||
BOM & Alternative Parts
|
||||
------------------------
|
||||
.. table:: BOM
|
||||
:widths: auto
|
||||
|
||||
===================================================== ============================= ==================================== ============================= ===================== =========================
|
||||
Ref Quantity Value Component Type Component Name Footprint
|
||||
===================================================== ============================= ==================================== ============================= ===================== =========================
|
||||
C1, C2, C5, C6, C14 5 10u Ceramic Capacitor / 0603_1608Metric
|
||||
C3, C4, C7, C8, C9, C10, C11, C12, C13, C15 10 100n Ceramic Capacitor / 0603_1608Metric
|
||||
C16, C17 2 33p Ceramic Capacitor / 0603_1608Metric
|
||||
D1 1 V\ :sub:`RMS`\=40V, I\ :sub:`F`\=2A Bridge Rectifier KMB24F MBS (TO-269AA)
|
||||
Q1, Q2, Q3, Q4, Q5 5 V\ :sub:`DS`\=60V, I\ :sub:`D`\=0.4A N-Channel MOSFET T2N7002BK SOT-23
|
||||
R1, R2, R5, R6 4 6k8 Resistor / 0603_1608Metric
|
||||
R3 1 200 Resistor / 0603_1608Metric
|
||||
R7, R8, R9 3 1k Resistor / 0603_1608Metric
|
||||
U1 1 V\ :sub:`OUT`\=3.3V Low Dropout Voltage Regulator HT7533S SOT-23
|
||||
U2 1 I=2.8A H-Bridge Driver BDR6133 SOIC-8
|
||||
U3 1 64Mb Flash Memory W25Q64JVSSIQ SOIC-8
|
||||
U4 1 / Microcontroller RP2040 QFN-56-1EP_7x7mm_P0.4mm
|
||||
Y1 1 f=12MHz Crystal Oscillator X322512MSB4SI Crystal_SMD_3225-4Pin_3.2x2.5mm
|
||||
===================================================== ============================= ==================================== ============================= ===================== =========================
|
||||
|
||||
|
||||
|
||||
NOTE: Keep capacitor V\ :sub:`max`\ in mind!
|
||||
|
||||
Alternatives for BDR6133:
|
||||
--------------------------
|
||||
|
||||
* `PT5126A-S-TP <https://lcsc.com/product-detail/Motor-Driver-ICs_PTC-Princeton-Tech-PT5126A-S-TP_C162093.html>`_
|
||||
* `PT2476 <https://lcsc.com/product-detail/Motor-Driver-ICs_PTC-Princeton-Tech-PT2476_C481903.html>`_
|
||||
|
||||
Alternative for HT7533S:
|
||||
------------------------
|
||||
|
||||
* `GS7533-33TR3 <https://www.lcsc.com/product-detail/Linear-Voltage-Regulators-LDO_Gainsil-GS7533-33TR3_C7427372.html>`_
|
||||
@@ -0,0 +1,108 @@
|
||||
# Hardware Description
|
||||
|
||||
## Overview
|
||||
|
||||

|
||||
|
||||
The above block diagram gives a general overview regarding the operation of components. For better illustration it has been divided into four functional blocks. Furthermore these functional blocks can be subdivided and will be explained below.
|
||||
|
||||
* Input Stage
|
||||
- DCC Signal Level Shift
|
||||
- Bridge Rectifier & Voltage Regulator
|
||||
* Motor Driver
|
||||
- Motor Driver
|
||||
- Back EMF measurement (ADC)
|
||||
* General Purpose
|
||||
- GPIO
|
||||
- Auxillary output
|
||||
* Microcontroller
|
||||
- Flash memory
|
||||
- Crystal oscillator
|
||||
|
||||
## Characteristics
|
||||
|
||||
|
||||
| Parameter | Symbol | Minimum | Maximum | Unit |
|
||||
| ----------------------------------------------------- | -------------- | ------- | -------- | ---- |
|
||||
| Absolute max. DCC Input Voltage | V<sub>DCC</sub> | -25 | +25 | V |
|
||||
| Absolute max. GPIO Voltage<sup>(0)</sup> | V<sub>PIN</sub> | -0.5 | 3.3+0.5 | V |
|
||||
| Input Voltage High<sup>(0)</sup> | V<sub>IH</sub> | 2.145 | 3.6 | V |
|
||||
| Input Voltage Low<sup>(0)</sup> | V<sub>IL</sub> | 0 | 1.155 | V |
|
||||
| Total GPIO Current<sup>(0)</sup> | I<sub>IOVDD_MAX</sub>| | 50 | mA |
|
||||
| Absolute max. motor output current<sup>(1)</sup> | I<sub>MOTOR</sub> | | 2.8 | A |
|
||||
| Absolute max. auxillary output current<sup>(2)</sup> | I<sub>AUX</sub> | | 400 | mA |
|
||||
|
||||
(0): According to: [RP2040 Datasheet](https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf) (assuming V<sub>DD</sub> = 3.3V)
|
||||
|
||||
(1): According to: [BDR6133 Datasheet](https://datasheet.lcsc.com/lcsc/2101211904_Bardeen-Micro--BDR6133_C2687793.pdf)
|
||||
|
||||
(2): According to: [T2N7002BK Datasheet](https://datasheet.lcsc.com/lcsc/1810271831_TOSHIBA-T2N7002BK-LM_C146372.pdf)
|
||||
|
||||
## Input Stage
|
||||
|
||||

|
||||
|
||||
D1 Rectifies the DCC square-wave into +V, the amplitude is not critical as long as its within the 25V limit. The rectified voltage +V is then provided to the 3.3V voltage regulator (U1) and to the motor driver (U2).
|
||||
|
||||
The MOSFET on the right effectively translates the rather high DCC voltage to a suitable level for the microcontroller to process. When Q1 is turned off GPIO21 is pulled high by the RP2040 internal pull-up resistor, as soon as Q1 gets turned on (V<sub>GS</sub> > V<sub>GS,th</sub>), GPIO21 gets pulled to GND potential. R1 and R2 ensure that V<sub>GS</sub> doesnt exceed ±20V.
|
||||
|
||||
## Motor Driver
|
||||
|
||||

|
||||
|
||||
The Motor Driver is a complete H-Bridge IC specifically made for DC-Motors.
|
||||
|
||||
In order to control the motor, it is necessary to measure the back-EMF. This is done by the ADC which measures at Points ADC_EMF_A and ADC_EMF_B respectively. The two resistors are used as a voltage divider.
|
||||
|
||||
## Auxillary Output
|
||||
|
||||

|
||||
|
||||
Switching of loads up to a maximum of about ~400mA can be done using four N-Channel MOSFETS. They are switching on the low-side which means the load effectively gets connected to GND potential as the transistor starts to conduct. GPIO24 - GPIO27 are used.
|
||||
|
||||
## GPIO
|
||||
|
||||
To switch lighter loads six soldering pads on the back side of the PCB are connected to GPIO0 - GPIO5 pins . Although not implemented yet they could theoretically be used as inputs as well (e.g. Reed switch).
|
||||
|
||||
## Microcontroller
|
||||
|
||||

|
||||
|
||||
The Microcontroller needs a crystal oscillator to function properly. External flash memory is also needed as it holds the configuration variables and the program itself. R3 & C14 are used to filter ADC_AVDD (ADC Reference Voltage).
|
||||
|
||||
|
||||
|
||||
## Complete Schematic
|
||||
|
||||

|
||||
|
||||
BOM & Alternative Parts
|
||||
--------------------------
|
||||
|
||||
| Ref | Quantity | Value | Component Type | Component Name | Footprint |
|
||||
| ----------------------------------------------------- | -------------- | ------- | -------- | ---- |---- |
|
||||
| C1, C2, C5, C6, C14 | 5 | 10u | Ceramic Capacitor | / | 0603_1608Metric |
|
||||
| C3, C4, C7, C8, C9, C10, C11, C12, C13, C15 | 10 | 100n | Ceramic Capacitor | / | 0603_1608Metric |
|
||||
| C16, C17 | 2 | 33p | Ceramic Capacitor | / | 0603_1608Metric |
|
||||
| D1 | 1 | V<sub>RMS</sub> = 40V , I<sub>F</sub> = 2A | Bridge Rectifier | KMB24F | MBS (TO-269AA) |
|
||||
| Q1, Q2, Q3, Q4, Q5 | 5 | V<sub>DS</sub> = 60V , I<sub>D</sub> = 0.4A | N-Channel MOSFET |T2N7002BK | SOT-23 |
|
||||
| R1, R2, R5, R6 | 4 | 6k8 | Resistor | / | 0603_1608Metric |
|
||||
| R3 | 1 | 200 | Resistor | / | 0603_1608Metric |
|
||||
| R7, R8, R9 | 3 | 1k | Resistor | / | 0603_1608Metric |
|
||||
| U1 | 1 | V<sub>OUT</sub> = 3.3V | Low Dropout Voltage Regulator | HT7533S | SOT-23 |
|
||||
| U2 | 1 | I = 2.8A | H-Bridge driver | BDR6133 | SOIC-8 |
|
||||
| U3 | 1 | 64Mb | Serial Flash Memory | W25Q64JVSSIQ | SOIC-8 |
|
||||
| U4 | 1 | / | Raspberry Pi RP2040 Microcontroller | RP2040 | QFN-56-1EP_7x7mm_P0.4mm |
|
||||
| Y1 | 1 | f = 12MHz | Crystal Oscillator | X322512MSB4SI | Crystal_SMD_3225-4Pin_3.2x2.5mm |
|
||||
|
||||
NOTE: Keep capacitor V<sub>max</sub> in mind!
|
||||
|
||||
Alternatives for BDR6133:
|
||||
|
||||
[PT5126A-S-TP](https://lcsc.com/product-detail/Motor-Driver-ICs_PTC-Princeton-Tech-PT5126A-S-TP_C162093.html)
|
||||
|
||||
[PT2476](https://lcsc.com/product-detail/Motor-Driver-ICs_PTC-Princeton-Tech-PT2476_C481903.html)
|
||||
|
||||
Alternative for HT7533S:
|
||||
|
||||
[GS7533-33TR3](https://www.lcsc.com/product-detail/Linear-Voltage-Regulators-LDO_Gainsil-GS7533-33TR3_C7427372.html)
|
||||
Reference in new issue
Block a user