Update Docs; Add 3D-Models for flash and Motor driver; Update Readme; Check program code for exceeding size in CMakeLists.txt; Moved measure() function to core1.c/core1.h; Added direction enum typedef; Update Control Loop Block Diagram;

This commit is contained in:
gab-k committed 2024-12-25 21:47:52 +01:00
1 parent 7d2c80574a
commit acdbf3cffe
25 files changed
+1195 -632

No files matched your search

+2 -40
View File
@@ -8,47 +8,9 @@
uint8_t speed_step_target = 0;
uint8_t speed_step_target_prev = 0;
uint32_t error_state = 0;
// Functions in shared.c can be accessed by both cores
// Measures Back-EMF voltage (proportional to the rotational speed of the motor) on GPIO 28 and GPIO 29 respectively (depending on direction)
float measure(uint8_t total_iterations,
uint8_t measurement_delay_us,
uint8_t l_side_arr_cutoff,
uint8_t r_side_arr_cutoff,
bool direction){
uint32_t sum = 0;
uint16_t adc_val[total_iterations];
int32_t j = 0;
uint16_t key;
pwm_set_gpio_level(MOTOR_FWD_PIN, 0);
pwm_set_gpio_level(MOTOR_REV_PIN, 0);
adc_select_input((!direction)+2);
busy_wait_us(measurement_delay_us);
adc_run(true);
for (int32_t i = 0; i < total_iterations; ++i) {
//Take adc value out of fifo when available, then do one step of insertion sort.
adc_val[i] = adc_fifo_get_blocking();
key = adc_val[i];
j = i - 1;
while (j >= 0 && adc_val[j] > key) {
adc_val[j + 1] = adc_val[j];
j--;
}
adc_val[j + 1] = key;
}
adc_run(false);
//discard x entries beginning from the lowest entry of the array (counting up); x = msr.l_side_arr_cutoff
//discard y entries beginning from the highest index of the array (counting down); y = msr.r_side_arr_cutoff
for (int32_t i = l_side_arr_cutoff; i < total_iterations - r_side_arr_cutoff ; ++i) {
sum += adc_val[i];
}
float res = (float)sum / (float)( total_iterations - (l_side_arr_cutoff + r_side_arr_cutoff) );
// return true to keep the repeating timer active
return res;
}
// Functions in shared.c are accessed by both cores
// retrieve 4Bytes from CV_ARRAY_FLASH at once and return 32-Bit value
uint32_t get_32bit_CV (uint16_t CV_start_index){
@@ -67,7 +29,7 @@ uint16_t get_16bit_CV (uint16_t CV_start_index){
return (byte_0) + (byte_1<<8);
}
bool get_direction_of_speed_step(uint8_t speed_step){
direction_t get_direction_of_speed_step(uint8_t speed_step){
// Shift by 7 Bytes to move bit7 into bit0 position and return
return speed_step >> 7;
}