Merge local branch 'changes' into main.
This commit is contained in:
commit
9ee13b67e7
10 files changed
+3320
-395
No files matched your search
@@ -5,29 +5,29 @@
|
||||
//////////////////////////
|
||||
|
||||
#include "core1.h"
|
||||
struct repeating_timer pid_control_timer,speed_helper_timer;
|
||||
|
||||
struct repeating_timer pid_control_timer, speed_helper_timer;
|
||||
|
||||
|
||||
// Update speed_step_target, end_target_index and direction on receiving data from core0
|
||||
void update_speed_dir(pid_params *pid, uint32_t speed_step_target){
|
||||
pid->speed_step_target = speed_step_target;
|
||||
// When CV_29 Bit 0 is set direction is reversed
|
||||
const bool reverse_dir = CV_ARRAY_FLASH[28] & 0b00000001;
|
||||
// Forward
|
||||
if(speed_step_target > 127) {
|
||||
pid->direction = true^reverse_dir;
|
||||
if (pid->speed_step_target == 128)
|
||||
pid->end_target_index = 0;
|
||||
else
|
||||
pid->end_target_index = (pid->speed_step_target-129);
|
||||
// Get speed_step_table_index depending on speed_step
|
||||
uint8_t get_speed_step_table_index_of_speed_step(uint8_t speed_step) {
|
||||
if (speed_step > 127) {
|
||||
// Forward
|
||||
if (speed_step == 128) {
|
||||
return 0;
|
||||
}
|
||||
else {
|
||||
return (speed_step - 129);
|
||||
}
|
||||
}
|
||||
// Reverse
|
||||
else {
|
||||
pid->direction = false^reverse_dir;
|
||||
if (pid->speed_step_target == 0)
|
||||
pid->end_target_index = 0;
|
||||
else
|
||||
pid->end_target_index = (pid->speed_step_target-1);
|
||||
// Reverse
|
||||
if (speed_step == 0) {
|
||||
return 0;
|
||||
}
|
||||
else {
|
||||
return (speed_step - 1);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@@ -37,51 +37,55 @@ void update_speed_dir(pid_params *pid, uint32_t speed_step_target){
|
||||
bool speed_helper(struct repeating_timer *const t) {
|
||||
// pid->setpoint only gets adjusted when the speed_helper_counter is equal to the accel_rate/decel_rate
|
||||
// -> Time for 1 Speed Step := (speed_helper timer delay)*(accel_rate) or CV_175*CV_3 or CV_175*CV_4
|
||||
pid_params *pid = (pid_params *)(t->user_data);
|
||||
pid_params *pid = (pid_params *) (t->user_data);
|
||||
const uint8_t accel_rate = CV_ARRAY_FLASH[2];
|
||||
const uint8_t decel_rate = CV_ARRAY_FLASH[3];
|
||||
static bool prev_dir;
|
||||
static uint8_t speed_helper_counter;
|
||||
static uint8_t speed_table_index;
|
||||
|
||||
// Emergency Stop
|
||||
if (pid->speed_step_target == 129 || pid->speed_step_target==1) {
|
||||
// Get speed_step_table_end_index corresponding to current speed_step_target
|
||||
uint8_t speed_step_table_end_index = get_speed_step_table_index_of_speed_step(speed_step_target);
|
||||
bool direction_changed = get_direction_of_speed_step(speed_step_target) !=
|
||||
get_direction_of_speed_step(speed_step_target_prev);
|
||||
|
||||
if (pid->speed_step_target == 129 || pid->speed_step_target == 1) {
|
||||
// Emergency Stop
|
||||
speed_table_index = 0;
|
||||
speed_helper_counter = 0;
|
||||
pid->setpoint = pid->speed_table[speed_table_index];
|
||||
}
|
||||
|
||||
// Acceleration
|
||||
else if (pid->end_target_index > speed_table_index && speed_helper_counter == accel_rate) {
|
||||
if(!accel_rate) speed_table_index = pid->end_target_index; // directly accelerate to end target speed
|
||||
else if (speed_step_table_end_index > speed_table_index && speed_helper_counter == accel_rate) {
|
||||
// Acceleration
|
||||
if (!accel_rate) speed_table_index = speed_step_table_end_index; // directly accelerate to end target speed
|
||||
else speed_table_index++;
|
||||
pid->setpoint = pid->speed_table[speed_table_index];
|
||||
speed_helper_counter = 0;
|
||||
}
|
||||
|
||||
// Deceleration
|
||||
else if (pid->end_target_index < speed_table_index && speed_helper_counter == decel_rate) {
|
||||
if(!decel_rate) speed_table_index = pid->end_target_index; // directly decelerate to end target speed
|
||||
else if (speed_step_table_end_index < speed_table_index && speed_helper_counter == decel_rate) {
|
||||
// Deceleration
|
||||
if (!decel_rate) speed_table_index = speed_step_table_end_index; // directly decelerate to end target speed
|
||||
else speed_table_index--;
|
||||
pid->setpoint = pid->speed_table[speed_table_index];
|
||||
speed_helper_counter = 0;
|
||||
}
|
||||
|
||||
// Change of direction while decelerating -> jump to most recent speed_step without delay (other direction)
|
||||
else if (pid->direction != prev_dir){
|
||||
speed_table_index = pid->end_target_index;
|
||||
else if (direction_changed) {
|
||||
// Change of direction while decelerating -> jump to most recent speed_step without delay (other direction)
|
||||
speed_table_index = speed_step_table_end_index;
|
||||
pid->setpoint = pid->speed_table[speed_table_index];
|
||||
speed_helper_counter = 0;
|
||||
}
|
||||
|
||||
// Acceleration/Deceleration "scheduled"
|
||||
else if (pid->end_target_index != speed_table_index) speed_helper_counter++;
|
||||
else if (speed_step_table_end_index != speed_table_index) {
|
||||
// Acceleration/Deceleration "scheduled"
|
||||
speed_helper_counter++;
|
||||
}
|
||||
|
||||
// Target reached -> Reset Counter
|
||||
else speed_helper_counter = 0;
|
||||
|
||||
// Save prev speed_helper direction - not to be confused with pid->prev_direction
|
||||
prev_dir = pid->direction;
|
||||
else {
|
||||
// Target reached -> Reset Counter
|
||||
speed_helper_counter = 0;
|
||||
}
|
||||
|
||||
// return true to schedule the repeating timer again
|
||||
return true;
|
||||
@@ -90,13 +94,13 @@ bool speed_helper(struct repeating_timer *const t) {
|
||||
|
||||
// Helper function to adjust pwm level/duty cycle.
|
||||
void adjust_pwm_level(const uint16_t level, const pid_params *pid) {
|
||||
// Forward
|
||||
if (pid->direction) {
|
||||
if (get_direction_of_speed_step(speed_step_target) == true) {
|
||||
// Forward
|
||||
pwm_set_gpio_level(MOTOR_REV_PIN, 0);
|
||||
pwm_set_gpio_level(MOTOR_FWD_PIN, level);
|
||||
}
|
||||
// Reverse
|
||||
else {
|
||||
// Reverse
|
||||
pwm_set_gpio_level(MOTOR_FWD_PIN, 0);
|
||||
pwm_set_gpio_level(MOTOR_REV_PIN, level);
|
||||
}
|
||||
@@ -104,67 +108,68 @@ void adjust_pwm_level(const uint16_t level, const pid_params *pid) {
|
||||
|
||||
|
||||
// Update feed-forward slope/gradient for both directions
|
||||
void update_m(pid_params *const pid){
|
||||
pid->m_fwd = (pid->y_2_fwd-pid->y_1_fwd)/(pid->x_2_fwd-pid->x_1_fwd);
|
||||
pid->m_rev = (pid->y_2_rev-pid->y_1_rev)/(pid->x_2_rev-pid->x_1_rev);
|
||||
void update_m(pid_params *const pid) {
|
||||
pid->m_fwd = (pid->y_2_fwd - pid->y_1_fwd) / (pid->x_2_fwd - pid->x_1_fwd);
|
||||
pid->m_rev = (pid->y_2_rev - pid->y_1_rev) / (pid->x_2_rev - pid->x_1_rev);
|
||||
}
|
||||
|
||||
|
||||
// Update feedforward function value y_2 in both directions
|
||||
void update_y(pid_params *const pid, const float i){
|
||||
// Forward
|
||||
if(pid->direction) {
|
||||
pid->y_2_fwd += i*pid->k_ff;
|
||||
void update_y(pid_params *const pid, const float i) {
|
||||
if (get_direction_of_speed_step(speed_step_target) == true) {
|
||||
// Forward
|
||||
pid->y_2_fwd += i * pid->k_ff;
|
||||
// Limit y_2_fwd
|
||||
if(pid->y_2_fwd > pid->max_output) pid->y_2_fwd = pid->max_output;
|
||||
else if(pid->y_2_fwd < pid->y_1_fwd) pid->y_2_fwd = pid->y_1_fwd;
|
||||
if (pid->y_2_fwd > pid->max_output) pid->y_2_fwd = pid->max_output;
|
||||
else if (pid->y_2_fwd < pid->y_1_fwd) pid->y_2_fwd = pid->y_1_fwd;
|
||||
}
|
||||
// Reverse
|
||||
else{
|
||||
pid->y_2_rev += i*pid->k_ff;
|
||||
else {
|
||||
// Reverse
|
||||
pid->y_2_rev += i * pid->k_ff;
|
||||
// Limit y_2_rev
|
||||
if(pid->y_2_rev > pid->max_output) pid->y_2_rev = pid->max_output;
|
||||
else if(pid->y_2_rev < pid->y_1_rev) pid->y_2_rev = pid->y_1_rev;
|
||||
if (pid->y_2_rev > pid->max_output) pid->y_2_rev = pid->max_output;
|
||||
else if (pid->y_2_rev < pid->y_1_rev) pid->y_2_rev = pid->y_1_rev;
|
||||
}
|
||||
|
||||
update_m(pid);
|
||||
}
|
||||
|
||||
|
||||
// Returns feedforward value corresponding to current setpoint
|
||||
float get_ff_val(const pid_params *const pid){
|
||||
float get_ff_val(const pid_params *const pid) {
|
||||
float val;
|
||||
// Forward
|
||||
if(pid->direction){
|
||||
val = pid->m_fwd*((float)pid->setpoint-pid->x_1_fwd)+pid->y_1_fwd;
|
||||
if (get_direction_of_speed_step(speed_step_target) == true) {
|
||||
// Forward
|
||||
val = pid->m_fwd * ((float) pid->setpoint - pid->x_1_fwd) + pid->y_1_fwd;
|
||||
}
|
||||
// Reverse
|
||||
else{
|
||||
val = pid->m_rev*((float)pid->setpoint-pid->x_1_rev)+pid->y_1_rev;
|
||||
else {
|
||||
// Reverse
|
||||
val = pid->m_rev * ((float) pid->setpoint - pid->x_1_rev) + pid->y_1_rev;
|
||||
}
|
||||
return val;
|
||||
}
|
||||
|
||||
|
||||
// Returns proportional gain value corresponding to current setpoint
|
||||
float get_kp(const pid_params *const pid){
|
||||
float sp = (float)pid->setpoint;
|
||||
if (sp < pid->k_p_x_1){
|
||||
float get_kp(const pid_params *const pid) {
|
||||
float sp = (float) pid->setpoint;
|
||||
if (sp < pid->k_p_x_1) {
|
||||
return pid->k_p_m_1 * sp + pid->k_p_y_0;
|
||||
}
|
||||
else{
|
||||
else {
|
||||
return pid->k_p_m_2 * (sp - pid->k_p_x_1) + pid->k_p_y_1;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// PID controller function gets called every x milliseconds where x is CV_49 aka sampling time (pid->t)
|
||||
bool pid_control(struct repeating_timer *t){
|
||||
bool pid_control(struct repeating_timer *t) {
|
||||
// Cast (void *) to (pid_params *)
|
||||
pid_params *pid = (pid_params *)(t->user_data);
|
||||
pid_params *pid = (pid_params *) (t->user_data);
|
||||
|
||||
// Acceleration from standstill or change in direction -> reset previous derivative, error and integral parts
|
||||
if((!pid->setpoint_prev && !pid->setpoint) || (pid->direction != pid->direction_prev)){
|
||||
bool direction_changed = get_direction_of_speed_step(speed_step_target) !=
|
||||
get_direction_of_speed_step(speed_step_target_prev);
|
||||
if ((!pid->setpoint_prev && !pid->setpoint) || direction_changed) {
|
||||
pid->d_prev = 0.0f;
|
||||
pid->i_prev = 0.0f;
|
||||
pid->e_prev = 0.0f;
|
||||
@@ -179,44 +184,48 @@ bool pid_control(struct repeating_timer *t){
|
||||
pid->msr_delay_in_us,
|
||||
pid->l_side_arr_cutoff,
|
||||
pid->r_side_arr_cutoff,
|
||||
pid->direction);
|
||||
const float e = (float)pid->setpoint - (pid->measurement - pid->adc_offset);
|
||||
get_direction_of_speed_step(speed_step_target));
|
||||
|
||||
const float measurement_corrected = pid->measurement - pid->adc_offset;
|
||||
const float e = (float) pid->setpoint - measurement_corrected;
|
||||
|
||||
// Proportional part, integral part and derivative part (including digital low-pass-filter with time constant tau)
|
||||
const float p = pid->k_p * e;
|
||||
float i = pid->ci_0*(e + pid->e_prev) + pid->i_prev;
|
||||
const float d = pid->cd_0*(pid->measurement-pid->measurement_prev)+pid->cd_1*pid->d_prev;
|
||||
float i = pid->ci_0 * (e + pid->e_prev) + pid->i_prev;
|
||||
const float d = pid->cd_0 * (pid->measurement - pid->measurement_prev) + pid->cd_1 * pid->d_prev;
|
||||
|
||||
// Check for limits on the integral part
|
||||
if (i > pid->int_lim_max) i = pid->int_lim_max;
|
||||
else if (i < pid->int_lim_min) i = pid->int_lim_min;
|
||||
if (i > pid->int_lim_max) { i = pid->int_lim_max; }
|
||||
else if (i < pid->int_lim_min) { i = pid->int_lim_min; }
|
||||
|
||||
// Sum feed forward + all controller terms (p+i+d). Limit Output from 0% to 100% duty cycle
|
||||
float output = feed_fwd+p+i+d;
|
||||
float output = feed_fwd + p + i + d;
|
||||
if (output < 0 || !pid->setpoint) output = 0.0f;
|
||||
else if (output > pid->max_output) output = pid->max_output;
|
||||
|
||||
if(LOGLEVEL >= 1) {
|
||||
if (LOGLEVEL >= 1) {
|
||||
static int counter = 0;
|
||||
counter++;
|
||||
if(counter > 100) {
|
||||
if (counter > 100) {
|
||||
LOG(1, "pid error(%f) output(%f)\n", e, output);
|
||||
counter = 0;
|
||||
counter = 0;
|
||||
}
|
||||
}
|
||||
|
||||
// Set PWM Level and discard results in adc fifo
|
||||
adjust_pwm_level((uint16_t)roundf(output),pid);
|
||||
adjust_pwm_level((uint16_t) roundf(output), pid);
|
||||
adc_fifo_drain();
|
||||
|
||||
// Check for High or Low Integrator values -> Update x,y values of feedforward function
|
||||
if( (output < pid->max_output && output > pid->max_output/2) && ((i > pid->int_lim_max/2) || (i < pid->int_lim_min/2)) ) update_y(pid,i);
|
||||
if ((output < pid->max_output && output > pid->max_output / 2) &&
|
||||
((i > pid->int_lim_max / 2) || (i < pid->int_lim_min / 2))) {
|
||||
update_y(pid, i);
|
||||
}
|
||||
|
||||
// Save previous error, integrator, differentiator, direction, setpoint and measured value also sum error to e_sum
|
||||
pid->e_prev = e;
|
||||
pid->i_prev = i;
|
||||
pid->d_prev = d;
|
||||
pid->direction_prev = pid->direction;
|
||||
pid->setpoint_prev = pid->setpoint;
|
||||
pid->measurement_prev = pid->measurement;
|
||||
|
||||
@@ -226,9 +235,9 @@ bool pid_control(struct repeating_timer *t){
|
||||
|
||||
|
||||
// PID controller and measurement parameter, and speed_table initialization
|
||||
void init_pid(pid_params *const pid){
|
||||
void init_pid(pid_params *const pid) {
|
||||
// Measurement variables initialization
|
||||
pid->adc_offset = (float)CV_ARRAY_FLASH[171];
|
||||
pid->adc_offset = (float) CV_ARRAY_FLASH[171];
|
||||
pid->msr_total_iterations = CV_ARRAY_FLASH[60];
|
||||
pid->msr_delay_in_us = CV_ARRAY_FLASH[61];
|
||||
pid->l_side_arr_cutoff = CV_ARRAY_FLASH[62];
|
||||
@@ -236,41 +245,41 @@ void init_pid(pid_params *const pid){
|
||||
|
||||
// Speed table initialization
|
||||
// Calculate speed setpoint table according to V_min, V_max and V_mid CVs
|
||||
const double v_min = (double)CV_ARRAY_FLASH[1];
|
||||
const double v_mid = (double)CV_ARRAY_FLASH[5]*16;
|
||||
const double v_max = (double)CV_ARRAY_FLASH[4]*16;
|
||||
const double v_min = (double) CV_ARRAY_FLASH[1];
|
||||
const double v_mid = (double) CV_ARRAY_FLASH[5] * 16;
|
||||
const double v_max = (double) CV_ARRAY_FLASH[4] * 16;
|
||||
|
||||
LOG(1, "speedtable min(%f) mid(%f) max(%f)\n", v_min, v_mid, v_max);
|
||||
|
||||
const double delta_x = 63;
|
||||
const double m_1 = (v_mid-v_min)/delta_x;
|
||||
const double m_2 = (v_max-v_mid)/delta_x;
|
||||
const double m_1 = (v_mid - v_min) / delta_x;
|
||||
const double m_2 = (v_max - v_mid) / delta_x;
|
||||
pid->speed_table[0] = 0;
|
||||
for (uint8_t i = 1; i < 64; ++i) {
|
||||
pid->speed_table[i] = (uint16_t)lround(m_1*(i-1)+v_min);
|
||||
pid->speed_table[i] = (uint16_t) lround(m_1 * (i - 1) + v_min);
|
||||
}
|
||||
for (uint8_t i = 64; i < 127; ++i) {
|
||||
pid->speed_table[i] = (uint16_t)lround(m_2*(i-63)+v_mid);
|
||||
pid->speed_table[i] = (uint16_t) lround(m_2 * (i - 63) + v_mid);
|
||||
}
|
||||
|
||||
// Controller constants initialization
|
||||
pid->k_i = (float)CV_ARRAY_FLASH[49]/10;
|
||||
pid->k_d = (float)CV_ARRAY_FLASH[50]/10000;
|
||||
pid->tau = (float)CV_ARRAY_FLASH[47]/1000;
|
||||
pid->t = (float)CV_ARRAY_FLASH[48]/1000;
|
||||
pid->ci_0 = (pid->k_i*pid->t)/2;
|
||||
pid->cd_0 = -(2*pid->k_d)/(2*pid->tau+pid->t);
|
||||
pid->cd_1 = (2*pid->tau-pid->t)/(2*pid->tau+pid->t);
|
||||
pid->int_lim_max = 10*(float)CV_ARRAY_FLASH[51];
|
||||
pid->int_lim_min = -10*(float)CV_ARRAY_FLASH[52];
|
||||
pid->k_ff = (float)CV_ARRAY_FLASH[46]/10000;
|
||||
pid->max_output = (float)(_125M/(CV_ARRAY_FLASH[8]*100+10000));
|
||||
pid->k_i = (float) CV_ARRAY_FLASH[49] / 10;
|
||||
pid->k_d = (float) CV_ARRAY_FLASH[50] / 10000;
|
||||
pid->tau = (float) CV_ARRAY_FLASH[47] / 1000;
|
||||
pid->t = (float) CV_ARRAY_FLASH[48] / 1000;
|
||||
pid->ci_0 = (pid->k_i * pid->t) / 2;
|
||||
pid->cd_0 = -(2 * pid->k_d) / (2 * pid->tau + pid->t);
|
||||
pid->cd_1 = (2 * pid->tau - pid->t) / (2 * pid->tau + pid->t);
|
||||
pid->int_lim_max = 10 * (float) CV_ARRAY_FLASH[51];
|
||||
pid->int_lim_min = -10 * (float) CV_ARRAY_FLASH[52];
|
||||
pid->k_ff = (float) CV_ARRAY_FLASH[46] / 10000;
|
||||
pid->max_output = (float) (_125M / (CV_ARRAY_FLASH[8] * 100 + 10000));
|
||||
pid->x_1_rev = 0.0f;
|
||||
pid->x_1_fwd = 0.0f;
|
||||
pid->y_1_fwd = (float)get_16bit_CV(175);
|
||||
pid->y_1_rev = (float)get_16bit_CV(177);
|
||||
pid->x_2_rev = (float)pid->speed_table[126];
|
||||
pid->x_2_fwd = (float)pid->speed_table[126];
|
||||
pid->y_1_fwd = (float) get_16bit_CV(175);
|
||||
pid->y_1_rev = (float) get_16bit_CV(177);
|
||||
pid->x_2_rev = (float) pid->speed_table[126];
|
||||
pid->x_2_fwd = (float) pid->speed_table[126];
|
||||
|
||||
// Controller variables initialization
|
||||
pid->y_2_fwd = pid->max_output;
|
||||
@@ -280,58 +289,38 @@ void init_pid(pid_params *const pid){
|
||||
pid->e_prev = 0.0f;
|
||||
pid->i_prev = 0.0f;
|
||||
pid->d_prev = 0.0f;
|
||||
pid->direction = false;
|
||||
pid->direction_prev = false;
|
||||
pid->speed_step_target = 0;
|
||||
pid->setpoint = 0;
|
||||
|
||||
// Gain scheduling initialization
|
||||
pid->k_p_x_1_shift = (float)CV_ARRAY_FLASH[59] / 255.0f;
|
||||
pid->k_p_x_1 = (float)pid->speed_table[126] * pid->k_p_x_1_shift;
|
||||
pid->k_p_x_2 = (float)pid->speed_table[126] * (1.0f - pid->k_p_x_1_shift);
|
||||
pid->k_p_y_0 = (float)get_16bit_CV(53) / 100.0f;
|
||||
pid->k_p_y_1 = (float)get_16bit_CV(55) / 100.0f;
|
||||
pid->k_p_y_2 = (float)get_16bit_CV(57) / 100.0f;
|
||||
pid->k_p_x_1_shift = (float) CV_ARRAY_FLASH[59] / 255.0f;
|
||||
pid->k_p_x_1 = (float) pid->speed_table[126] * pid->k_p_x_1_shift;
|
||||
pid->k_p_x_2 = (float) pid->speed_table[126] * (1.0f - pid->k_p_x_1_shift);
|
||||
pid->k_p_y_0 = (float) get_16bit_CV(53) / 100.0f;
|
||||
pid->k_p_y_1 = (float) get_16bit_CV(55) / 100.0f;
|
||||
pid->k_p_y_2 = (float) get_16bit_CV(57) / 100.0f;
|
||||
pid->k_p_m_1 = (pid->k_p_y_1 - pid->k_p_y_0) / pid->k_p_x_1;
|
||||
pid->k_p_m_2 = (pid->k_p_y_2 - pid->k_p_y_1) / pid->k_p_x_2;
|
||||
|
||||
update_m(pid);
|
||||
}
|
||||
|
||||
|
||||
void core1_entry() {
|
||||
LOG(1, "core1 init...\n");
|
||||
pid_params pid_parameters;
|
||||
pid_params *pid = &pid_parameters;
|
||||
init_pid(pid);
|
||||
alarm_pool_add_repeating_timer_ms(alarm_pool_create(0,1),
|
||||
alarm_pool_add_repeating_timer_ms(alarm_pool_create(0, 1),
|
||||
CV_ARRAY_FLASH[48],
|
||||
pid_control,
|
||||
pid,
|
||||
&pid_control_timer);
|
||||
irq_set_priority(0,0x00); // 0x00 = highest priority
|
||||
alarm_pool_add_repeating_timer_ms(alarm_pool_create(1,1),
|
||||
// Set TIMER_IRQ_0 to highest priority of 0x00
|
||||
irq_set_priority(TIMER_IRQ_0, 0x00);
|
||||
alarm_pool_add_repeating_timer_ms(alarm_pool_create(1, 1),
|
||||
CV_ARRAY_FLASH[174],
|
||||
speed_helper,
|
||||
pid,
|
||||
&speed_helper_timer);
|
||||
// Send direction pointer for access and to let core0 know that core1 is done with initialization,
|
||||
// Note: Pointer will be cast into uint32_t and then back into bool * on core0 (Both 32-Bit Datatype).
|
||||
// This is done only to accommodate the correct data type associated with multicore_fifo_push_blocking().
|
||||
multicore_fifo_push_blocking((uint32_t) &(pid->direction));
|
||||
const uint64_t packet_timeout_threshold_in_us = CV_ARRAY_FLASH[10]*1000000;
|
||||
absolute_time_t time_last_update = get_absolute_time();
|
||||
// printf("core1 done\n");
|
||||
while (1){
|
||||
// Check for time difference between last packet and current time (Packet Timeout)
|
||||
absolute_time_t current_time = get_absolute_time();
|
||||
if (absolute_time_diff_us(time_last_update,current_time) > packet_timeout_threshold_in_us){
|
||||
update_speed_dir(pid,1 + 128*pid->direction); // Emergency stop on timeout
|
||||
}
|
||||
// If core0 sends new speed data to core1 speed_step_target and direction variables get updated
|
||||
if(multicore_fifo_rvalid()) {
|
||||
update_speed_dir(pid, multicore_fifo_pop_blocking());
|
||||
time_last_update = get_absolute_time();
|
||||
}
|
||||
}
|
||||
LOG(1, "core1 done\n");
|
||||
while (true);
|
||||
}
|
||||
Reference in new issue
Block a user