Simplify get_speed_step_table_index_of_speed_step(); Removed unnecessary parameter from adjust_pwm_level function; Removed some redundant else statements and redundant "== true" from some expressions; Fixed reset_message_check() function; Added const to some function parameters and local variables;
This commit is contained in:
1 parent
9ee13b67e7
commit
8fb10e212e
3 files changed
+53
-58
No files matched your search
@@ -45,7 +45,7 @@ float two_std_dev(const float arr[], const uint32_t length) {
|
|||||||
|
|
||||||
|
|
||||||
// Measures constant adc offset and programs the offset into flash
|
// Measures constant adc offset and programs the offset into flash
|
||||||
void adc_offset_adjustment(uint32_t n) {
|
void adc_offset_adjustment(const uint32_t n) {
|
||||||
LOG(1, "adc_offset_adjustment");
|
LOG(1, "adc_offset_adjustment");
|
||||||
|
|
||||||
float offsets_fwd[n];
|
float offsets_fwd[n];
|
||||||
@@ -105,7 +105,7 @@ void acknowledge() {
|
|||||||
|
|
||||||
|
|
||||||
// When bit matches sent byte -> acknowledge()
|
// When bit matches sent byte -> acknowledge()
|
||||||
void verify_cv_bit(const uint16_t cv_address, bool bit_val, uint8_t bit_pos) {
|
void verify_cv_bit(const uint16_t cv_address, const bool bit_val, const uint8_t bit_pos) {
|
||||||
const uint8_t mask = 0b00000001;
|
const uint8_t mask = 0b00000001;
|
||||||
const bool res = ((CV_ARRAY_FLASH[cv_address] >> bit_pos) & mask) == bit_val;
|
const bool res = ((CV_ARRAY_FLASH[cv_address] >> bit_pos) & mask) == bit_val;
|
||||||
if (res) {
|
if (res) {
|
||||||
@@ -250,7 +250,7 @@ void set_outputs(const uint32_t functions_to_set_bitmask) {
|
|||||||
uint32_t temp_mask = 1;
|
uint32_t temp_mask = 1;
|
||||||
for (uint8_t i = 0; i < 32; i++) {
|
for (uint8_t i = 0; i < 32; i++) {
|
||||||
if (temp_mask & functions_to_set_bitmask) {
|
if (temp_mask & functions_to_set_bitmask) {
|
||||||
bool direction = get_direction_of_speed_step(speed_step_target);
|
const bool direction = get_direction_of_speed_step(speed_step_target);
|
||||||
outputs_to_set |= get_32bit_CV(i * 8 + 260 - 4 * direction);
|
outputs_to_set |= get_32bit_CV(i * 8 + 260 - 4 * direction);
|
||||||
}
|
}
|
||||||
temp_mask <<= 1;
|
temp_mask <<= 1;
|
||||||
@@ -278,7 +278,7 @@ void set_outputs(const uint32_t functions_to_set_bitmask) {
|
|||||||
|
|
||||||
|
|
||||||
// Update functions F0 - F31 when function command is received or in case of direction change
|
// Update functions F0 - F31 when function command is received or in case of direction change
|
||||||
void update_active_functions(uint32_t new_function_bitmask, uint8_t clr_bit_ind, bool direction_change) {
|
void update_active_functions(uint32_t new_function_bitmask, const uint8_t clr_bit_ind, const bool direction_change) {
|
||||||
static uint32_t active_functions;
|
static uint32_t active_functions;
|
||||||
static uint32_t prev_active_func;
|
static uint32_t prev_active_func;
|
||||||
|
|
||||||
@@ -294,7 +294,7 @@ void update_active_functions(uint32_t new_function_bitmask, uint8_t clr_bit_ind,
|
|||||||
new_function_bitmask &= ~(clr_bit_arr[clr_bit_ind]); // Clear every bit except bits corresponding to group of functions
|
new_function_bitmask &= ~(clr_bit_arr[clr_bit_ind]); // Clear every bit except bits corresponding to group of functions
|
||||||
active_functions &= clr_bit_arr[clr_bit_ind]; // Clear bits corresponding to group of functions
|
active_functions &= clr_bit_arr[clr_bit_ind]; // Clear bits corresponding to group of functions
|
||||||
active_functions |= new_function_bitmask; // Write bits corresponding to group of functions
|
active_functions |= new_function_bitmask; // Write bits corresponding to group of functions
|
||||||
uint32_t changes = active_functions ^ prev_active_func; // Checks for changes from previous state
|
const uint32_t changes = active_functions ^ prev_active_func; // Checks for changes from previous state
|
||||||
if (changes) {
|
if (changes) {
|
||||||
set_outputs(active_functions);
|
set_outputs(active_functions);
|
||||||
}
|
}
|
||||||
@@ -363,7 +363,6 @@ bool address_evaluation(const uint8_t number_of_bytes, const uint8_t *const byte
|
|||||||
void instruction_evaluation(const uint8_t number_of_bytes, const uint8_t *const byte_array) {
|
void instruction_evaluation(const uint8_t number_of_bytes, const uint8_t *const byte_array) {
|
||||||
// start of transmission -> ... -> command_byte_n -> ... -> command_byte_0 -> ... -> end of transmission
|
// start of transmission -> ... -> command_byte_n -> ... -> command_byte_0 -> ... -> end of transmission
|
||||||
// The position of command bytes depend on whether the address is long or not
|
// The position of command bytes depend on whether the address is long or not
|
||||||
uint8_t command_byte_n;
|
|
||||||
uint8_t command_byte_start_index;
|
uint8_t command_byte_start_index;
|
||||||
if (is_long_address(number_of_bytes, byte_array)) {
|
if (is_long_address(number_of_bytes, byte_array)) {
|
||||||
command_byte_start_index = number_of_bytes - 3;
|
command_byte_start_index = number_of_bytes - 3;
|
||||||
@@ -371,14 +370,14 @@ void instruction_evaluation(const uint8_t number_of_bytes, const uint8_t *const
|
|||||||
else {
|
else {
|
||||||
command_byte_start_index = number_of_bytes - 2;
|
command_byte_start_index = number_of_bytes - 2;
|
||||||
}
|
}
|
||||||
command_byte_n = byte_array[command_byte_start_index];
|
const uint8_t command_byte_n = byte_array[command_byte_start_index];
|
||||||
|
|
||||||
if (command_byte_n == 0b00111111) {
|
if (command_byte_n == 0b00111111) {
|
||||||
// 0011-1111 (128 Speed Step Control) - 2 Byte length
|
// 0011-1111 (128 Speed Step Control) - 2 Byte length
|
||||||
speed_step_target_prev = speed_step_target;
|
speed_step_target_prev = speed_step_target;
|
||||||
speed_step_target = byte_array[command_byte_start_index - 1];
|
speed_step_target = byte_array[command_byte_start_index - 1];
|
||||||
// Check for direction change
|
// Check for direction change
|
||||||
bool direction_changed = get_direction_of_speed_step(speed_step_target) !=
|
const bool direction_changed = get_direction_of_speed_step(speed_step_target) !=
|
||||||
get_direction_of_speed_step(speed_step_target_prev);
|
get_direction_of_speed_step(speed_step_target_prev);
|
||||||
// In case of a direction change, functions need to be updated because functions depend on direction
|
// In case of a direction change, functions need to be updated because functions depend on direction
|
||||||
if (direction_changed) {
|
if (direction_changed) {
|
||||||
@@ -423,12 +422,16 @@ void instruction_evaluation(const uint8_t number_of_bytes, const uint8_t *const
|
|||||||
// Check for reset message - When reset message is found, stop the motor and disable all functions.
|
// Check for reset message - When reset message is found, stop the motor and disable all functions.
|
||||||
bool reset_message_check(const uint8_t number_of_bytes, const uint8_t *const byte_array) {
|
bool reset_message_check(const uint8_t number_of_bytes, const uint8_t *const byte_array) {
|
||||||
if (byte_array[number_of_bytes - 1] == 0b00000000 && byte_array[number_of_bytes - 2] == 0b00000000) {
|
if (byte_array[number_of_bytes - 1] == 0b00000000 && byte_array[number_of_bytes - 2] == 0b00000000) {
|
||||||
const uint32_t speed_step = 1;
|
const bool direction = get_direction_of_speed_step(speed_step_target);
|
||||||
multicore_fifo_push_blocking(speed_step); // Emergency Stop
|
// Set previous speed step target to current speed step target
|
||||||
|
speed_step_target_prev = speed_step_target;
|
||||||
|
// Set speed step target to emergency stop speed step ( 1 for Reverse direction / 129 for forward direction)
|
||||||
|
// for details see get_direction_of_speed_step() doxygen comment in "shared.h"
|
||||||
|
speed_step_target = 1 + 128*direction;
|
||||||
update_active_functions(0,0,0); // Disables all functions
|
update_active_functions(0,0,0); // Disables all functions
|
||||||
return true;
|
return true;
|
||||||
}
|
}
|
||||||
else return false;
|
return false;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
@@ -447,7 +450,7 @@ int8_t verify_dcc_message() {
|
|||||||
|
|
||||||
|
|
||||||
//start of transmission -> byte_n(address byte) -> ... -> byte_0(error detection byte) -> end of transmission
|
//start of transmission -> byte_n(address byte) -> ... -> byte_0(error detection byte) -> end of transmission
|
||||||
void bits_to_byte_array(int8_t number_of_bytes, uint8_t byte_array[]) {
|
void bits_to_byte_array(const int8_t number_of_bytes, uint8_t byte_array[]) {
|
||||||
for (uint8_t i = 0; i < number_of_bytes; i++) {
|
for (uint8_t i = 0; i < number_of_bytes; i++) {
|
||||||
byte_array[i] = input_bit_buffer >> (i * 9 + 1);
|
byte_array[i] = input_bit_buffer >> (i * 9 + 1);
|
||||||
}
|
}
|
||||||
@@ -565,7 +568,7 @@ uint16_t measure_base_pwm(const bool direction, const uint8_t iterations) {
|
|||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
} while ((measurement - (float) CV_ARRAY_FLASH[171]) < 5.0f);
|
} while ((measurement - (float) CV_ARRAY_FLASH[171]) < 5.0f);
|
||||||
LOG(3, "level_arr[%d] = %f\n", i, level);
|
LOG(3, "level_arr[%d] = %d\n", i, level);
|
||||||
level_arr[i] = (float) level;
|
level_arr[i] = (float) level;
|
||||||
busy_wait_ms(100);
|
busy_wait_ms(100);
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -11,24 +11,14 @@ struct repeating_timer pid_control_timer, speed_helper_timer;
|
|||||||
|
|
||||||
// Get speed_step_table_index depending on speed_step
|
// Get speed_step_table_index depending on speed_step
|
||||||
uint8_t get_speed_step_table_index_of_speed_step(uint8_t speed_step) {
|
uint8_t get_speed_step_table_index_of_speed_step(uint8_t speed_step) {
|
||||||
if (speed_step > 127) {
|
// Clear direction information in bit7
|
||||||
// Forward
|
speed_step = speed_step & 0b01111111;
|
||||||
if (speed_step == 128) {
|
// Check for Stop or Emergency Stop speed step
|
||||||
return 0;
|
if (speed_step == 0 || speed_step == 1) {
|
||||||
}
|
return 0;
|
||||||
else {
|
|
||||||
return (speed_step - 129);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else {
|
|
||||||
// Reverse
|
|
||||||
if (speed_step == 0) {
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
else {
|
|
||||||
return (speed_step - 1);
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
|
// In any other case i.e. speed steps 1 to 126:
|
||||||
|
return speed_step-1;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
@@ -37,16 +27,16 @@ uint8_t get_speed_step_table_index_of_speed_step(uint8_t speed_step) {
|
|||||||
bool speed_helper(struct repeating_timer *const t) {
|
bool speed_helper(struct repeating_timer *const t) {
|
||||||
// pid->setpoint only gets adjusted when the speed_helper_counter is equal to the accel_rate/decel_rate
|
// pid->setpoint only gets adjusted when the speed_helper_counter is equal to the accel_rate/decel_rate
|
||||||
// -> Time for 1 Speed Step := (speed_helper timer delay)*(accel_rate) or CV_175*CV_3 or CV_175*CV_4
|
// -> Time for 1 Speed Step := (speed_helper timer delay)*(accel_rate) or CV_175*CV_3 or CV_175*CV_4
|
||||||
pid_params *pid = (pid_params *) (t->user_data);
|
pid_params *const pid = (pid_params *) (t->user_data);
|
||||||
const uint8_t accel_rate = CV_ARRAY_FLASH[2];
|
const uint8_t accel_rate = CV_ARRAY_FLASH[2];
|
||||||
const uint8_t decel_rate = CV_ARRAY_FLASH[3];
|
const uint8_t decel_rate = CV_ARRAY_FLASH[3];
|
||||||
static uint8_t speed_helper_counter;
|
static uint8_t speed_helper_counter;
|
||||||
static uint8_t speed_table_index;
|
static uint8_t speed_table_index;
|
||||||
|
|
||||||
// Get speed_step_table_end_index corresponding to current speed_step_target
|
// Get speed_step_table_end_index corresponding to current speed_step_target
|
||||||
uint8_t speed_step_table_end_index = get_speed_step_table_index_of_speed_step(speed_step_target);
|
const uint8_t speed_step_table_end_index = get_speed_step_table_index_of_speed_step(speed_step_target);
|
||||||
bool direction_changed = get_direction_of_speed_step(speed_step_target) !=
|
const bool direction_changed = get_direction_of_speed_step(speed_step_target) !=
|
||||||
get_direction_of_speed_step(speed_step_target_prev);
|
get_direction_of_speed_step(speed_step_target_prev);
|
||||||
|
|
||||||
if (pid->speed_step_target == 129 || pid->speed_step_target == 1) {
|
if (pid->speed_step_target == 129 || pid->speed_step_target == 1) {
|
||||||
// Emergency Stop
|
// Emergency Stop
|
||||||
@@ -56,32 +46,28 @@ bool speed_helper(struct repeating_timer *const t) {
|
|||||||
}
|
}
|
||||||
else if (speed_step_table_end_index > speed_table_index && speed_helper_counter == accel_rate) {
|
else if (speed_step_table_end_index > speed_table_index && speed_helper_counter == accel_rate) {
|
||||||
// Acceleration
|
// Acceleration
|
||||||
if (!accel_rate) speed_table_index = speed_step_table_end_index; // directly accelerate to end target speed
|
if (!accel_rate) speed_table_index = speed_step_table_end_index; // directly accelerate to end target speed
|
||||||
else speed_table_index++;
|
else speed_table_index++;
|
||||||
pid->setpoint = pid->speed_table[speed_table_index];
|
pid->setpoint = pid->speed_table[speed_table_index];
|
||||||
speed_helper_counter = 0;
|
speed_helper_counter = 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
else if (speed_step_table_end_index < speed_table_index && speed_helper_counter == decel_rate) {
|
else if (speed_step_table_end_index < speed_table_index && speed_helper_counter == decel_rate) {
|
||||||
// Deceleration
|
// Deceleration
|
||||||
if (!decel_rate) speed_table_index = speed_step_table_end_index; // directly decelerate to end target speed
|
if (!decel_rate) speed_table_index = speed_step_table_end_index; // directly decelerate to end target speed
|
||||||
else speed_table_index--;
|
else speed_table_index--;
|
||||||
pid->setpoint = pid->speed_table[speed_table_index];
|
pid->setpoint = pid->speed_table[speed_table_index];
|
||||||
speed_helper_counter = 0;
|
speed_helper_counter = 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
else if (direction_changed) {
|
else if (direction_changed) {
|
||||||
// Change of direction while decelerating -> jump to most recent speed_step without delay (other direction)
|
// Change of direction while decelerating -> jump to most recent speed_step without delay (other direction)
|
||||||
speed_table_index = speed_step_table_end_index;
|
speed_table_index = speed_step_table_end_index;
|
||||||
pid->setpoint = pid->speed_table[speed_table_index];
|
pid->setpoint = pid->speed_table[speed_table_index];
|
||||||
speed_helper_counter = 0;
|
speed_helper_counter = 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
else if (speed_step_table_end_index != speed_table_index) {
|
else if (speed_step_table_end_index != speed_table_index) {
|
||||||
// Acceleration/Deceleration "scheduled"
|
// Acceleration/Deceleration "scheduled"
|
||||||
speed_helper_counter++;
|
speed_helper_counter++;
|
||||||
}
|
}
|
||||||
|
|
||||||
else {
|
else {
|
||||||
// Target reached -> Reset Counter
|
// Target reached -> Reset Counter
|
||||||
speed_helper_counter = 0;
|
speed_helper_counter = 0;
|
||||||
@@ -93,8 +79,8 @@ bool speed_helper(struct repeating_timer *const t) {
|
|||||||
|
|
||||||
|
|
||||||
// Helper function to adjust pwm level/duty cycle.
|
// Helper function to adjust pwm level/duty cycle.
|
||||||
void adjust_pwm_level(const uint16_t level, const pid_params *pid) {
|
void adjust_pwm_level(const uint16_t level) {
|
||||||
if (get_direction_of_speed_step(speed_step_target) == true) {
|
if (get_direction_of_speed_step(speed_step_target)) {
|
||||||
// Forward
|
// Forward
|
||||||
pwm_set_gpio_level(MOTOR_REV_PIN, 0);
|
pwm_set_gpio_level(MOTOR_REV_PIN, 0);
|
||||||
pwm_set_gpio_level(MOTOR_FWD_PIN, level);
|
pwm_set_gpio_level(MOTOR_FWD_PIN, level);
|
||||||
@@ -116,7 +102,7 @@ void update_m(pid_params *const pid) {
|
|||||||
|
|
||||||
// Update feedforward function value y_2 in both directions
|
// Update feedforward function value y_2 in both directions
|
||||||
void update_y(pid_params *const pid, const float i) {
|
void update_y(pid_params *const pid, const float i) {
|
||||||
if (get_direction_of_speed_step(speed_step_target) == true) {
|
if (get_direction_of_speed_step(speed_step_target)) {
|
||||||
// Forward
|
// Forward
|
||||||
pid->y_2_fwd += i * pid->k_ff;
|
pid->y_2_fwd += i * pid->k_ff;
|
||||||
// Limit y_2_fwd
|
// Limit y_2_fwd
|
||||||
@@ -137,7 +123,7 @@ void update_y(pid_params *const pid, const float i) {
|
|||||||
// Returns feedforward value corresponding to current setpoint
|
// Returns feedforward value corresponding to current setpoint
|
||||||
float get_ff_val(const pid_params *const pid) {
|
float get_ff_val(const pid_params *const pid) {
|
||||||
float val;
|
float val;
|
||||||
if (get_direction_of_speed_step(speed_step_target) == true) {
|
if (get_direction_of_speed_step(speed_step_target)) {
|
||||||
// Forward
|
// Forward
|
||||||
val = pid->m_fwd * ((float) pid->setpoint - pid->x_1_fwd) + pid->y_1_fwd;
|
val = pid->m_fwd * ((float) pid->setpoint - pid->x_1_fwd) + pid->y_1_fwd;
|
||||||
}
|
}
|
||||||
@@ -151,24 +137,22 @@ float get_ff_val(const pid_params *const pid) {
|
|||||||
|
|
||||||
// Returns proportional gain value corresponding to current setpoint
|
// Returns proportional gain value corresponding to current setpoint
|
||||||
float get_kp(const pid_params *const pid) {
|
float get_kp(const pid_params *const pid) {
|
||||||
float sp = (float) pid->setpoint;
|
const float sp = (float) pid->setpoint;
|
||||||
if (sp < pid->k_p_x_1) {
|
if (sp < pid->k_p_x_1) {
|
||||||
return pid->k_p_m_1 * sp + pid->k_p_y_0;
|
return pid->k_p_m_1 * sp + pid->k_p_y_0;
|
||||||
}
|
}
|
||||||
else {
|
return pid->k_p_m_2 * (sp - pid->k_p_x_1) + pid->k_p_y_1;
|
||||||
return pid->k_p_m_2 * (sp - pid->k_p_x_1) + pid->k_p_y_1;
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
// PID controller function gets called every x milliseconds where x is CV_49 aka sampling time (pid->t)
|
// PID controller function gets called every x milliseconds where x is CV_49 aka sampling time (pid->t)
|
||||||
bool pid_control(struct repeating_timer *t) {
|
bool pid_control(struct repeating_timer *const t) {
|
||||||
// Cast (void *) to (pid_params *)
|
// Cast (void *) to (pid_params *)
|
||||||
pid_params *pid = (pid_params *) (t->user_data);
|
pid_params *const pid = (pid_params *) (t->user_data);
|
||||||
|
|
||||||
// Acceleration from standstill or change in direction -> reset previous derivative, error and integral parts
|
// Acceleration from standstill or change in direction -> reset previous derivative, error and integral parts
|
||||||
bool direction_changed = get_direction_of_speed_step(speed_step_target) !=
|
const bool direction_changed = get_direction_of_speed_step(speed_step_target) !=
|
||||||
get_direction_of_speed_step(speed_step_target_prev);
|
get_direction_of_speed_step(speed_step_target_prev);
|
||||||
if ((!pid->setpoint_prev && !pid->setpoint) || direction_changed) {
|
if ((!pid->setpoint_prev && !pid->setpoint) || direction_changed) {
|
||||||
pid->d_prev = 0.0f;
|
pid->d_prev = 0.0f;
|
||||||
pid->i_prev = 0.0f;
|
pid->i_prev = 0.0f;
|
||||||
@@ -195,13 +179,21 @@ bool pid_control(struct repeating_timer *t) {
|
|||||||
const float d = pid->cd_0 * (pid->measurement - pid->measurement_prev) + pid->cd_1 * pid->d_prev;
|
const float d = pid->cd_0 * (pid->measurement - pid->measurement_prev) + pid->cd_1 * pid->d_prev;
|
||||||
|
|
||||||
// Check for limits on the integral part
|
// Check for limits on the integral part
|
||||||
if (i > pid->int_lim_max) { i = pid->int_lim_max; }
|
if (i > pid->int_lim_max) {
|
||||||
else if (i < pid->int_lim_min) { i = pid->int_lim_min; }
|
i = pid->int_lim_max;
|
||||||
|
}
|
||||||
|
else if (i < pid->int_lim_min) {
|
||||||
|
i = pid->int_lim_min;
|
||||||
|
}
|
||||||
|
|
||||||
// Sum feed forward + all controller terms (p+i+d). Limit Output from 0% to 100% duty cycle
|
// Sum feed forward + all controller terms (p+i+d). Limit Output from 0% to 100% duty cycle
|
||||||
float output = feed_fwd + p + i + d;
|
float output = feed_fwd + p + i + d;
|
||||||
if (output < 0 || !pid->setpoint) output = 0.0f;
|
if (output < 0 || !pid->setpoint) {
|
||||||
else if (output > pid->max_output) output = pid->max_output;
|
output = 0.0f;
|
||||||
|
}
|
||||||
|
else if (output > pid->max_output) {
|
||||||
|
output = pid->max_output;
|
||||||
|
}
|
||||||
|
|
||||||
if (LOGLEVEL >= 1) {
|
if (LOGLEVEL >= 1) {
|
||||||
static int counter = 0;
|
static int counter = 0;
|
||||||
@@ -213,7 +205,7 @@ bool pid_control(struct repeating_timer *t) {
|
|||||||
}
|
}
|
||||||
|
|
||||||
// Set PWM Level and discard results in adc fifo
|
// Set PWM Level and discard results in adc fifo
|
||||||
adjust_pwm_level((uint16_t) roundf(output), pid);
|
adjust_pwm_level((uint16_t) roundf(output));
|
||||||
adc_fifo_drain();
|
adc_fifo_drain();
|
||||||
|
|
||||||
// Check for High or Low Integrator values -> Update x,y values of feedforward function
|
// Check for High or Low Integrator values -> Update x,y values of feedforward function
|
||||||
|
|||||||
@@ -59,7 +59,7 @@ typedef struct pid_params{
|
|||||||
|
|
||||||
uint8_t get_speed_step_table_index_of_speed_step(uint8_t speed_step);
|
uint8_t get_speed_step_table_index_of_speed_step(uint8_t speed_step);
|
||||||
bool speed_helper(struct repeating_timer *t);
|
bool speed_helper(struct repeating_timer *t);
|
||||||
void adjust_pwm_level(uint16_t level, const pid_params *pid);
|
void adjust_pwm_level(uint16_t level);
|
||||||
void update_m(pid_params *pid);
|
void update_m(pid_params *pid);
|
||||||
void update_y(pid_params *pid,float i);
|
void update_y(pid_params *pid,float i);
|
||||||
float get_ff_val(const pid_params *pid);
|
float get_ff_val(const pid_params *pid);
|
||||||
|
|||||||
Reference in new issue
Block a user