Revert changes to LOG macro

This commit is contained in:
gab-k committed 2023-12-30 15:37:38 +01:00
1 parent c8b75ee71f
commit 52ec79105d
3 files changed
+26 -26

No files matched your search

+22 -22
View File
@@ -79,7 +79,7 @@ void adc_offset_adjustment(uint32_t n){
float overall_avg = (offset_avg_fwd+offset_avg_rev)/2; float overall_avg = (offset_avg_fwd+offset_avg_rev)/2;
uint8_t offset = (uint8_t)roundf(overall_avg); uint8_t offset = (uint8_t)roundf(overall_avg);
LOG(1, "new adc offset CV[171] (%f): (uint8_t)%d", overall_avg, offset); LOG(1, "new adc offset CV[171] (%f): (uint8_t)%d\n", overall_avg, offset);
// Create temporary array -> change CV 172 in temp array -> erase flash -> write temp array to flash // Create temporary array -> change CV 172 in temp array -> erase flash -> write temp array to flash
uint8_t CV_ARRAY_TEMP[CV_ARRAY_SIZE]; uint8_t CV_ARRAY_TEMP[CV_ARRAY_SIZE];
@@ -144,7 +144,7 @@ void write_cv_handler(uint16_t cv_index, uint8_t cv_data){
// Read only (CV_7 - Version no.) // Read only (CV_7 - Version no.)
// ADC offset Adjustment (CV_7; Value = 7); // ADC offset Adjustment (CV_7; Value = 7);
if (cv_data == 7) { if (cv_data == 7) {
LOG(1, "trigger adc offset adjustment via cv7 => 7"); LOG(1, "trigger adc offset adjustment via cv7 => 7\n");
adc_offset_adjustment(8192); adc_offset_adjustment(8192);
} }
break; break;
@@ -152,7 +152,7 @@ void write_cv_handler(uint16_t cv_index, uint8_t cv_data){
// Read only (CV_8 - Manufacturer ID) // Read only (CV_8 - Manufacturer ID)
// Reset all CVs to Default (CV_8; Value = 8) // Reset all CVs to Default (CV_8; Value = 8)
if (cv_data == 8){ if (cv_data == 8){
LOG(1, "reset of flash triggered via cv8 => 8"); LOG(1, "reset of flash triggered via cv8 => 8\n");
flash_range_erase(FLASH_TARGET_OFFSET, FLASH_SECTOR_SIZE); flash_range_erase(FLASH_TARGET_OFFSET, FLASH_SECTOR_SIZE);
flash_range_program(FLASH_TARGET_OFFSET, CV_ARRAY_DEFAULT, FLASH_PAGE_SIZE * 2); flash_range_program(FLASH_TARGET_OFFSET, CV_ARRAY_DEFAULT, FLASH_PAGE_SIZE * 2);
} }
@@ -544,7 +544,7 @@ uint16_t measure_base_pwm(bool direction, uint8_t iterations){
for (int i = 0; i < iterations; ++i) { for (int i = 0; i < iterations; ++i) {
uint16_t max_level = _125M/(CV_ARRAY_FLASH[8]*100+10000); uint16_t max_level = _125M/(CV_ARRAY_FLASH[8]*100+10000);
uint16_t level = max_level/20; uint16_t level = max_level/20;
LOG(3, "iteration %d: maxlevel %d level %d", i, max_level, level); LOG(3, "iteration %d: maxlevel %d level %d\n", i, max_level, level);
float measurement; float measurement;
do { do {
pwm_set_gpio_level(gpio, level); pwm_set_gpio_level(gpio, level);
@@ -555,20 +555,20 @@ uint16_t measure_base_pwm(bool direction, uint8_t iterations){
CV_ARRAY_FLASH[62], CV_ARRAY_FLASH[62],
CV_ARRAY_FLASH[63], CV_ARRAY_FLASH[63],
direction); direction);
LOG(3, "level %d measurement %f loop-cond: %f", level, measurement, measurement-(float)CV_ARRAY_FLASH[171]); LOG(3, "level %d measurement %f loop-cond: %f\n", level, measurement, measurement-(float)CV_ARRAY_FLASH[171]);
if (level > max_level) { if (level > max_level) {
// Abort measurement and write default value of 0 to flash // Abort measurement and write default value of 0 to flash
LOG(1, "measure_base_pwm: abort measurement and return 0"); LOG(1, "measure_base_pwm: abort measurement and return 0\n");
return 0; return 0;
} }
} while((measurement - (float)CV_ARRAY_FLASH[171]) < 5.0f); } while((measurement - (float)CV_ARRAY_FLASH[171]) < 5.0f);
LOG(3, "level_arr[%d] = %f", i, level); LOG(3, "level_arr[%d] = %f\n", i, level);
level_arr[i] = (float)level; level_arr[i] = (float)level;
busy_wait_ms(100); busy_wait_ms(100);
} }
// Find and return overall average discarding outliers in measurement - multiply with 0.9 // Find and return overall average discarding outliers in measurement - multiply with 0.9
float retVal = 0.9f*two_std_dev(level_arr,5); float retVal = 0.9f*two_std_dev(level_arr,5);
LOG(1, "measure_base_pwm: %d(%f)", (uint16_t)retVal, retVal); LOG(1, "measure_base_pwm: %d(%f)\n", (uint16_t)retVal, retVal);
return (uint16_t)(retVal); return (uint16_t)(retVal);
} }
@@ -579,14 +579,14 @@ uint16_t measure_base_pwm(bool direction, uint8_t iterations){
void cv_setup_check(){ void cv_setup_check(){
// Check for flash factory setting and set CV_FLASH_ARRAY to default values when factory condition ("0xFF") is found. // Check for flash factory setting and set CV_FLASH_ARRAY to default values when factory condition ("0xFF") is found.
if ( CV_ARRAY_FLASH[64] == 0xFF ){ if ( CV_ARRAY_FLASH[64] == 0xFF ){
LOG(1, "found cv[64] equals to 0xff, reseting CVs (and CV[8] = 8)"); LOG(1, "found cv[64] equals to 0xff, reseting CVs (and CV[8] = 8)\n");
uint8_t arr[4] = {125,8,7,124}; uint8_t arr[4] = {125,8,7,124};
program_mode(4,arr); //reset to CV_ARRAY_DEFAULT (write CV_8 = 8) program_mode(4,arr); //reset to CV_ARRAY_DEFAULT (write CV_8 = 8)
} }
// Check for adc offset setup // Check for adc offset setup
if ( CV_ARRAY_FLASH[171] == 0xFF ){ if ( CV_ARRAY_FLASH[171] == 0xFF ){
LOG(1, "found cv[171] equals to 0xff, adc offset adjstments (and cr[7] = 7)"); LOG(1, "found cv[171] equals to 0xff, adc offset adjstments (and cr[7] = 7)\n");
uint8_t arr[4] = {125,7,6,124}; uint8_t arr[4] = {125,7,6,124};
program_mode(4,arr); //ADC offset adjustment (write CV_7 = 7) program_mode(4,arr); //ADC offset adjustment (write CV_7 = 7)
} }
@@ -594,7 +594,7 @@ void cv_setup_check(){
// Check for base PWM configuration - used for feed-forward // Check for base PWM configuration - used for feed-forward
// Forward Direction // Forward Direction
if (get_16bit_CV(175) == 0){ if (get_16bit_CV(175) == 0){
LOG(1, "found cv[175] equals to 0, forward direction"); LOG(1, "found cv[175] equals to 0, forward direction\n");
uint16_t base_pwm_fwd = measure_base_pwm(true,10); uint16_t base_pwm_fwd = measure_base_pwm(true,10);
uint8_t base_pwm_fwd_high_byte = base_pwm_fwd>>8; uint8_t base_pwm_fwd_high_byte = base_pwm_fwd>>8;
uint8_t base_pwm_fwd_low_byte = base_pwm_fwd&0x00FF; uint8_t base_pwm_fwd_low_byte = base_pwm_fwd&0x00FF;
@@ -605,7 +605,7 @@ void cv_setup_check(){
} }
// Reverse Direction // Reverse Direction
if (get_16bit_CV(177) == 0){ if (get_16bit_CV(177) == 0){
LOG(1, "found cv[177] equals to 0, reverse direction"); LOG(1, "found cv[177] equals to 0, reverse direction\n");
uint16_t base_pwm_rev = measure_base_pwm(false,10); uint16_t base_pwm_rev = measure_base_pwm(false,10);
uint8_t base_pwm_rev_high_byte = base_pwm_rev>>8; uint8_t base_pwm_rev_high_byte = base_pwm_rev>>8;
uint8_t base_pwm_rev_low_byte = base_pwm_rev&0x00FF; uint8_t base_pwm_rev_low_byte = base_pwm_rev&0x00FF;
@@ -614,8 +614,8 @@ void cv_setup_check(){
uint8_t arr1[4] = {125,base_pwm_rev_low_byte,178,124}; uint8_t arr1[4] = {125,base_pwm_rev_low_byte,178,124};
program_mode(4,arr1); program_mode(4,arr1);
} }
LOG(1, "int_lim_max %d", CV_ARRAY_FLASH[51]); LOG(1, "int_lim_max %d\n", CV_ARRAY_FLASH[51]);
LOG(1, "int_lim_min %d", CV_ARRAY_FLASH[52]); LOG(1, "int_lim_min %d\n", CV_ARRAY_FLASH[52]);
} }
@@ -626,7 +626,7 @@ bool get_direction(bool *direction_ptr){
static bool *dir_ptr; static bool *dir_ptr;
if(!set_flag) { if(!set_flag) {
if (direction_ptr == NULL){ if (direction_ptr == NULL){
LOG(0, "Error! Direction pointer argument is NULL-pointer!") LOG(0, "Error! Direction pointer argument is NULL-pointer!\n")
} }
else { else {
set_flag = true; set_flag = true;
@@ -646,7 +646,7 @@ void init_motor_pwm(uint8_t gpio) {
pwm_set_gpio_level(gpio,0); pwm_set_gpio_level(gpio,0);
pwm_set_enabled(slice_num, true); pwm_set_enabled(slice_num, true);
LOG(2, "init motor(%d): wrapCounter %d clkdiv %d", gpio, wrap_counter, CV_ARRAY_FLASH[173]); LOG(2, "init motor(%d): wrapCounter %d clkdiv %d\n", gpio, wrap_counter, CV_ARRAY_FLASH[173]);
} }
@@ -665,20 +665,20 @@ void init_gpio_adc(){
int main() { int main() {
stdio_init_all(); stdio_init_all();
LOG(1, "\n\n======\ncore0 init"); LOG(1, "\n\n======\ncore0 init\n");
init_gpio_adc(); init_gpio_adc();
LOG(1, "init motor pwms"); LOG(1, "init motor pwms\n");
init_motor_pwm(MOTOR_FWD_PIN); init_motor_pwm(MOTOR_FWD_PIN);
init_motor_pwm(MOTOR_REV_PIN); init_motor_pwm(MOTOR_REV_PIN);
LOG(1, "check cvs"); LOG(1, "check cvs\n");
cv_setup_check(); cv_setup_check();
LOG(1, "init outputs"); LOG(1, "init outputs\n");
init_outputs(); init_outputs();
LOG(1, "init gpios"); LOG(1, "init gpios\n");
gpio_init(DCC_INPUT_PIN); gpio_init(DCC_INPUT_PIN);
gpio_set_dir(DCC_INPUT_PIN, GPIO_IN); gpio_set_dir(DCC_INPUT_PIN, GPIO_IN);
gpio_pull_up(DCC_INPUT_PIN); gpio_pull_up(DCC_INPUT_PIN);
gpio_set_irq_enabled_with_callback(DCC_INPUT_PIN, GPIO_IRQ_EDGE_RISE, true, &track_signal_rise); gpio_set_irq_enabled_with_callback(DCC_INPUT_PIN, GPIO_IRQ_EDGE_RISE, true, &track_signal_rise);
LOG(1, "core0 done"); LOG(1, "core0 done\n");
while (1); while (1);
} }
+3 -3
View File
@@ -200,7 +200,7 @@ bool pid_control(struct repeating_timer *t){
static int counter = 0; static int counter = 0;
counter++; counter++;
if(counter > 100) { if(counter > 100) {
LOG(1, "pid error(%f) output(%f)", e, output); LOG(1, "pid error(%f) output(%f)\n", e, output);
counter = 0; counter = 0;
} }
} }
@@ -240,7 +240,7 @@ void init_pid(pid_params *pid){
double v_mid = (double)CV_ARRAY_FLASH[5]*16; double v_mid = (double)CV_ARRAY_FLASH[5]*16;
double v_max = (double)CV_ARRAY_FLASH[4]*16; double v_max = (double)CV_ARRAY_FLASH[4]*16;
LOG(1, "speedtable min(%f) mid(%f) max(%f)", v_min, v_mid, v_max); LOG(1, "speedtable min(%f) mid(%f) max(%f)\n", v_min, v_mid, v_max);
double delta_x = 63; double delta_x = 63;
double m_1 = (v_mid-v_min)/delta_x; double m_1 = (v_mid-v_min)/delta_x;
@@ -300,7 +300,7 @@ void init_pid(pid_params *pid){
void core1_entry() { void core1_entry() {
LOG(1, "core1 init..."); LOG(1, "core1 init...\n");
pid_params pid_parameters; pid_params pid_parameters;
pid_params *pid = &pid_parameters; pid_params *pid = &pid_parameters;
init_pid(pid); init_pid(pid);
+1 -1
View File
@@ -25,7 +25,7 @@
// outside world (this is configure automatically for you below!) // outside world (this is configure automatically for you below!)
// - IMPORTANT: you have to enable uart in the cmakelists.txt to enable logging! // - IMPORTANT: you have to enable uart in the cmakelists.txt to enable logging!
#define LOGLEVEL 0 #define LOGLEVEL 0
#define LOG(level, ...) { if(level <= LOGLEVEL) {printf(__VA_ARGS__, "\n");}} #define LOG(level, ...) { if(level <= LOGLEVEL) {printf(__VA_ARGS__);}}
// Constant Value of 125 x 10⁶ // Constant Value of 125 x 10⁶
#define _125M 125000000 #define _125M 125000000