Update Sphinx documentation
This commit is contained in:
1 parent
5a00f5af2c
commit
185c703bc0
16 files changed
+235
-261
No files matched your search
@@ -0,0 +1,27 @@
|
||||
Troubleshooting
|
||||
================
|
||||
|
||||
To narrow down the issue when your decoder is not working as expected, you can do the following (in no particular order):
|
||||
|
||||
Enable logging and or debug via SWD
|
||||
------------------------------------
|
||||
Log messages can be enabled and output via either UART or USB please see :ref:`logging` for details.
|
||||
For more advanced users it might also be beneficial to :ref:`debug with SWD <debugging_via_swd>`
|
||||
|
||||
Checking the power supply:
|
||||
--------------------------------------
|
||||
|
||||
* **+3V3 to GND** should be 3.3V ± 1%
|
||||
* **VDC/+V to GND** should be somewhere in the range of at least 6V to 23V depending on your track voltage.
|
||||
|
||||
If you don't measure the correct voltages, try to `measure your track voltage <https://dccwiki.com/Measuring_Track_Voltage>`_
|
||||
|
||||
Check your motor:
|
||||
-----------------
|
||||
|
||||
Desolder your motor and try the motor with an appropriate power supply and DC voltage, to check if the motor is working or not.
|
||||
|
||||
CV Reset:
|
||||
------------
|
||||
|
||||
Try to reset the decoder by writing a value of ``8`` to ``CV8`` (beware, this will reset the complete CV memory!)
|
||||
Reference in new issue
Block a user