easylinux/Maison
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Debut

Browse Source
This commit is contained in:
Serge NOEL
2026-02-12 07:13:04 +01:00
parent 7206746130
commit ec9957d5b1
593 changed files with 2016 additions and 476236 deletions
Download Patch File Download Diff File Expand all files Collapse all files

17
PacoMouseCYD/Platformio/include/User_Setup.h
View File

@@ -1,3 +1,4 @@
// USER DEFINED SETTINGS
// Set driver type, fonts to be loaded, pins used and SPI control method etc
//
@@ -9,7 +10,7 @@
// Note that some sketches are designed for a particular TFT pixel width/height
// User defined information reported by "Read_User_Setup" test & diagnostics example
#define USER_SETUP_INFO "User_Setup CYD 2.8"
#define USER_SETUP_INFO "User_Setup"
// Define to disable all #warnings in library (can be put in User_Setup_Select.h)
//#define DISABLE_ALL_LIBRARY_WARNINGS
@@ -73,8 +74,8 @@
// For ST7735, ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display
// Try ONE option at a time to find the correct colour order for your display
// #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
// #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
// #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
//#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
// For M5Stack ESP32 module with integrated ILI9341 display ONLY, remove // in line below
@@ -112,7 +113,7 @@
// If colours are inverted (white shows as black) then uncomment one of the next
// 2 lines try both options, one of the options should correct the inversion.
#define TFT_INVERSION_ON
// #define TFT_INVERSION_ON
// #define TFT_INVERSION_OFF
@@ -221,7 +222,7 @@
//#define TFT_RST 33 // Reset pin (could connect to Arduino RESET pin)
//#define TFT_BL 22 // LED back-light
#define TOUCH_CS 33 // Chip select pin (T_CS) of touch screen
//#define TOUCH_CS 21 // Chip select pin (T_CS) of touch screen
//#define TFT_WR 22 // Write strobe for modified Raspberry Pi TFT only
@@ -354,7 +355,7 @@
// #define SPI_FREQUENCY 5000000
// #define SPI_FREQUENCY 10000000
// #define SPI_FREQUENCY 20000000
// #define SPI_FREQUENCY 27000000
//#define SPI_FREQUENCY 27000000
// #define SPI_FREQUENCY 40000000
#define SPI_FREQUENCY 55000000 // STM32 SPI1 only (SPI2 maximum is 27MHz)
// #define SPI_FREQUENCY 80000000
@@ -368,7 +369,7 @@
// The ESP32 has 2 free SPI ports i.e. VSPI and HSPI, the VSPI is the default.
// If the VSPI port is in use and pins are not accessible (e.g. TTGO T-Beam)
// then uncomment the following line:
#define USE_HSPI_PORT
//#define USE_HSPI_PORT
// Comment out the following #define if "SPI Transactions" do not need to be
// supported. When commented out the code size will be smaller and sketches will
@@ -380,4 +381,4 @@
// Transactions are automatically enabled by the library for an ESP32 (to use HAL mutex)
// so changing it here has no effect
// #define SUPPORT_TRANSACTIONS
// #define SUPPORT_TRANSACTIONS