easylinux/JIMRI
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
e7a7593712ebf619e6fdc2d0676c9fd73f1de66c
JIMRI/xml/decoders/Uhlenbrock_Power4.xml
T
Serge NOEL efdf1683af Initialisation depot
2026-06-17 14:00:51 +02:00

344 lines
20 KiB
XML
Raw Blame History

<?xml version="1.0" encoding="utf-8"?>
<?xml-stylesheet type="text/xsl" href="../XSLT/decoder.xsl"?>
<!-- Copyright (C) JMRI 2021 All rights reserved -->
<!-- LOCONETLNCVMODE requires 3 elements to address an LNCV module on LocoNet:
1. Article Number (aka type/class ID) = decoder model productID (integer)
2. Module Address (optional, see below)
3. CV number
For processing by JMRI LnOpsProgrammer, elements 1. and 3. are combined in the CV number e.g., "1.3".
Uhlenbrock and Digikeijs/Digirails publish the Article number for each (new) device.
The Uhlenbrock Power4 has Article number 6324, which was registered with Uhlenbrock.
Older LNCV devices may not have their own address, or even no article. They can be programmed using
Broadcast mode, but you have to be sure only one such device is powered, as they all would respond to
programming commands. See LNCV help in help/en/package/jmri/jmrix/loconet/swing/lncvprog/LncvProgPane.shtml -->
<decoder-config xmlns:xi="http://www.w3.org/2001/XInclude" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://jmri.org/xml/schema/decoder-4-15-2.xsd" showEmptyPanes="no">
<version author="Egbert Broerse" version="1.0" lastUpdated="20210206"/>
<!-- version 1 - new decoder definition using new programming mode LOCONETLNCVMODE, requires JMRI 4.22 -->
<!-- compare to Power8, a 7A Booster. Because of the way LNCV includes the art.nr. in the CV it could not be included in this file -->
<decoder>
<family name="Booster" mfg="Uhlenbrock Elektronik" type="stationary">
<model model="Power4" productID="6324" maxTotalCurrent="3.5A" formFactor="Stationary" comment="3.5A Multiprotocol Booster">
<versionCV />
<size length="104" width="58" height="33" units="mm" />
</model>
</family>
<programming direct="no" paged="no" register="no" ops="no">
<mode>LOCONETLNCVMODE</mode>
</programming>
<variables>
<variable CV="6324.0" item="Long Address" mask="VVVVVVVVVVVVVVVV" default="1" comment="Module address" >
<decVal min="0" max="65534"/>
<label xml:lang="it">Indirizzo Modulo: </label>
<label xml:lang="fr">Adresse Module: </label>
<label xml:lang="de">Moduladresse: </label>
<label xml:lang="nl">Module-adres: </label>
<label>Module Address: </label>
<tooltip>Enter as decimal value (0-65534)</tooltip>
</variable>
<variable CV="6324.1" item="Decoder Version" readOnly="yes">
<decVal/>
<label xml:lang="it">Versione Booster: </label>
<label xml:lang="fr">Version Booster: </label>
<label xml:lang="de">Softwareversion: </label>
<label xml:lang="nl">Booster firmware-versie: </label>
<label>Booster Firmware Version: </label>
</variable>
<variable CV="6324.3" item="Configuration" default="92">
<decVal/>
<label xml:lang="de">Gesamtwert LNCV3: </label>
<label xml:lang="nl">Gecombineerde waarde LNCV3: </label>
<label>Combined LNCV3 Value: </label>
<tooltip>Intended for verification only, set options below.</tooltip>
</variable>
<variable CV="6324.3" mask="XXXXXXXV" item="Ignore DIP Switches" default="0">
<xi:include href="http://jmri.org/xml/decoders/parts/enum-NoYes.xml"/>
<label xml:lang="de">Nutze CV5 für Grundeinstellung</label>
<label xml:lang="nl">Boosterbesturing instellen met CV5</label>
<label>Use CV5 for Booster Control</label>
<tooltip>On: Set in CV5 (below). Off: Set using DIP hardware switches.</tooltip>
<tooltip xml:lang="de">Ein: CV5 (unten) bestimmt die Booster Grundeinstellung. Aus: Eingabe mit DIP Schalter</tooltip>
<tooltip xml:lang="nl">Aan: CV5 (hieronder) bepaalt besturing Booster. Uit: Stel in met DIP schakelaars</tooltip>
</variable>
<variable CV="6324.3" mask="XXXXXXVX" item="Switch STOP/GO" default="0">
<xi:include href="http://jmri.org/xml/decoders/parts/enum-NoYes.xml"/>
<label xml:lang="de">Einschalten mit GO/STOP</label>
<label xml:lang="nl">Inschakelen met GO/STOP</label>
<label>Turn on/off by LocoNet GO/STOP</label>
<tooltip>Booster switches on/off by LocoNet GO/STOP instruction (GPON/GPOFF). Off: Signal on selected input switches booster on/off</tooltip>
<tooltip xml:lang="de">Booster ein-/ausschalten per LocoNet-Befehl GO/STOP (GPON/GPOFF). Aus: Eingangssignal am gewählten Boostereingang schaltet Verstärker ein/aus.</tooltip>
<tooltip xml:lang="nl">Booster inschakelen met LocoNet GO/STOP instructie (GPON/GPOFF). Uit: Ingestelde ingangssignaal schakelt booster aan/uit</tooltip>
</variable>
<variable CV="6324.3" mask="XXXXXVXX" item="Booster All" default="1">
<xi:include href="http://jmri.org/xml/decoders/parts/enum-NoYes.xml"/>
<label xml:lang="de">Verstärker zusammen schalten</label>
<label xml:lang="nl">Alle Boosters gelijk aan/uit</label>
<label>All Boosters Off</label>
<tooltip>On: At Power Off, send a LocoNet GPOFF message to the Command Station turning off all boosters</tooltip>
<tooltip xml:lang="de">Ein: Beim Ausschalten ein GPOFF Bericht and die Zentrale senden damit alle Verstärker ausgeschaltet werden</tooltip>
<tooltip xml:lang="nl">Aan: Bij uitschakelen een GPOFF bericht sturen aan de centrale om alle boosters uit te schakelen.</tooltip>
</variable>
<variable CV="6324.3" mask="XXXXVXXX" item="Signal Off to Input" default="1">
<xi:include href="http://jmri.org/xml/decoders/parts/enum-NoYes.xml"/>
<label xml:lang="de">Sende Ein/Aus über Eingang</label>
<label xml:lang="nl">Verstuur Aan/uit op Ingang</label>
<label>Signal Off to Input</label>
<tooltip>On: At Power Off, send status to Input (Märklin or Lenz DCC Booster Input)</tooltip>
<tooltip xml:lang="de">Ein: Beim Ausschalten signal über Eingang senden (Märklin or Lenz DCC Booster Eingang)</tooltip>
<tooltip xml:lang="nl">Aan: Uitschakelen melden op de Booster Ingang (Märklin or Lenz DCC Booster Input)</tooltip>
</variable>
<variable CV="6324.3" mask="XXXVXXXX" item="Send Short" default="1">
<xi:include href="http://jmri.org/xml/decoders/parts/enum-NoYes.xml"/>
<label xml:lang="de">Sende Kurzschluss-bericht</label>
<label xml:lang="fr">Envoie un rapport á court-circuit</label>
<label xml:lang="nl">Stuur LN bericht bij kortsluiting</label>
<label>Send Short Detected LN-message</label>
<tooltip>Booster sends a special L.NET report if there is a short circuit or temperature shut down, enabling the control unit to display which booster has a short circuit.</tooltip>
<tooltip xml:lang="de">Booster sendet bei Kurzschluss oder Temperaturüberschritt einen besonderen L.NET Bericht für die Intellibox II.</tooltip>
<tooltip xml:lang="nl">De booster verstuurt bij kortsluiting of te hoge temperatuur een speciaal bericht op LocoNet zodat de centrale de status kan tonen.</tooltip>
</variable>
<variable CV="6324.3" mask="XXVXXXXX" item="Invert Outputs" default="0">
<xi:include href="http://jmri.org/xml/decoders/parts/enum-NoYes.xml"/>
<label xml:lang="de">Gleissignal umpolen</label>
<label xml:lang="fr">Booster á polarité inversé́</label>
<label xml:lang="nl">Uitgangen Omgekeerd</label>
<label>Invert Output Polarity</label>
<tooltip>Reverse booster output polarity (to correct swapped wires)</tooltip>
<tooltip xml:lang="de">Gleissignal umpolen zur Verwendung gedrehter LocoNet Kabel oder bei Vertauschung von C und D des DCC-Boostereingangs.</tooltip>
<tooltip xml:lang="nl">Keer polariteit van de uitgangen om (herstelt omgekeerde aansluitingen)</tooltip>
<tooltip xml:lang="fr">Le polarité des sorties du booster sont inversé (cable)</tooltip>
</variable>
<variable CV="6324.3" mask="XVXXXXXX" item="Cut Out Hardware" default="1">
<xi:include href="http://jmri.org/xml/decoders/parts/enum-NoYes.xml"/>
<label>Cut Out Hardware</label>
<label xml:lang="de">Cut Out Geräte</label>
<label xml:lang="nl">Cut Out </label>
<tooltip>Cut Out Hardware activated (required for Selectrix operation)</tooltip>
<tooltip xml:lang="de">Cut Out Hardware aktiviert ( (notwendig für den RailCom Betrieb/Selectrix)</tooltip>
<tooltip xml:lang="nl">Schakel Cut Out Hardware in (vereist voor Selectrix)</tooltip>
</variable>
<variable CV="6324.4" item="Starting Phase Wait" default="30">
<decVal min="0" max="255"/>
<label>Starting phase wait: </label>
<label xml:lang="de">Start Wartezeit: </label>
<label xml:lang="nl">Opstartpauze: </label>
<tooltip>Waiting period in 0.5 s steps. The standard value is equivalent to approx. 15 seconds</tooltip>
<tooltip xml:lang="de">Startphase Wartezeit in 0,5s Schritten. Werkseinstellung ~ 15 s.</tooltip>
<tooltip xml:lang="nl">Wachttijd inschakelen in stappen van 0,5s. Standaard ingesteld op ca. 15 s.</tooltip>
</variable>
<!-- no choice, but item="Action Mode" is required to hide elements in UI unless it's a LocoServo -->
<variable CV="6324.5" mask="XXXXXXVV" comment="bits 0-1" item="Booster Control" default="0">
<enumVal>
<enumChoice choice="0" value="0">
<choice>LocoNet Input</choice>
<choice xml:lang="de">LocoNet Eingang</choice>
<choice xml:lang="nl">LocoNet Ingang</choice>
</enumChoice>
<enumChoice choice="0" value="1">
<choice>DCC Booster Input (Lenz CDE)</choice>
<choice xml:lang="de">DCC Verstärker-eingang (Lenz CDE)</choice>
<choice xml:lang="nl">DCC Booster-ingang (Lenz CDE)</choice>
</enumChoice>
<enumChoice choice="0" value="2">
<choice>Märklin Booster Input</choice>
<choice xml:lang="de">Märklin Verstärker-eingang</choice>
<choice xml:lang="nl">Märklin Booster-ingang</choice>
</enumChoice>
</enumVal>
<label>Booster Control:</label>
<label xml:lang="de">Grundeinstellungen:</label>
<label xml:lang="nl">Booster-besturing:</label>
<tooltip>Instead of the dip switches, set CV3 bit 0 to 1 and this choice will apply</tooltip>
<tooltip xml:lang="de">Soll der Booster nicht über den DIP-Switch sondern per LocoNet CV eingestellt werden, setze Bit 0 in der LNCV 3.</tooltip>
</variable>
<variable CV="6324.5" mask="XXXXXVXX" item="DCC Brake" default="0">
<xi:include href="http://jmri.org/xml/decoders/parts/enum-NoYes.xml"/>
<label>DCC Brake Generator</label>
<label xml:lang="de">DCC-Bremsgenerator</label>
<label xml:lang="nl">DCC Afremmen</label>
<tooltip>Off: Normal operation, Brake Generator off</tooltip>
<tooltip xml:lang="de">Aus: Normalbetrieb</tooltip>
<tooltip xml:lang="nl">Uit: Normaal bedrijf, remgenerator uit</tooltip>
</variable>
<variable CV="6324.5" mask="XXXXVXXX" item="RailCom CutOut" default="0">
<xi:include href="http://jmri.org/xml/decoders/parts/enum-NoYes.xml"/>
<label>DCC-RailCom CutOut</label>
<tooltip>Off: RailCom off</tooltip>
<tooltip xml:lang="de">Aus: RailCom deaktiviert</tooltip>
<tooltip xml:lang="nl">Uit: RailCom uitgeschakeld</tooltip>
</variable>
<variable CV="6324.6" readOnly="yes" item="Temperature">
<decVal max="255"/>
<label xml:lang="de">Betriebstemperatur in °C: </label>
<label xml:lang="fr">Température (ºC): </label>
<label xml:lang="nl">Temperatuur (ºC): </label>
<label>Operating Temperature (ºC): </label>
</variable>
<variable CV="6324.7" readOnly="yes" item="Load">
<decVal max="100"/>
<label xml:lang="de">Strombelastung (%)): </label>
<label xml:lang="fr">Pourcentage de charge: </label>
<label xml:lang="nl">Huidige belasting (%): </label>
<label>Power Load (%): </label>
</variable>
<variable CV="6324.8" item="Switch Address" mask="VVVVVVVVVVVV" default="0">
<decVal min="1" max="2047"/>
<label xml:lang="de">Adresse Ein-/Ausschalten: </label>
<label xml:lang="fr">Adresse de commutation: </label>
<label xml:lang="nl">Adres voor Aan/Uit: </label>
<label>Booster On/Off Address: </label>
<tooltip>Solenoid address to turn single booster on or off</tooltip>
<tooltip xml:lang="de">Magnetartikeladresse für Booster Einzelabschaltung</tooltip>
<tooltip xml:lang="fr">Adresse de commutation pour allumer ou éteindre le booster</tooltip>
<tooltip xml:lang="nl">Magnetisch artikeladres voor Individuele uitschakeling van de booster</tooltip>
</variable>
<variable CV="6324.9" item="Braking Signal" default="0">
<decVal min="0" max="255"/>
<label>Braking Signal Data: </label>
<label xml:lang="de">Bremssignaldaten: </label>
<label xml:lang="nl">Instelling Afremmen</label>
<tooltip>Data for braking signal (not explained in manual)</tooltip>
<tooltip xml:lang="de">Daten für Bremssignal (z.B. Langsamfahrt)</tooltip>
<tooltip xml:lang="nl">Data voor Remsignaal (bijv. Langzaam rijden)</tooltip>
</variable>
<variable CV="6324.10" item="DCC Cutout Time" default="63">
<decVal min="0" max="255"/>
<label>DCC CutOut Time: </label>
<label xml:lang="de">DCC CutOut-Zeit: </label>
<label xml:lang="nl">DCC CutOut-tijd</label>
<tooltip>DCC CutOut time in 7.5 µ seconds steps</tooltip>
<tooltip xml:lang="de">DCC CutOut-Dauer in 7,5 μs Schritten</tooltip>
<tooltip xml:lang="nl">DCC CutOut-tijd in stappen van 7,5 μs</tooltip>
</variable>
<variable CV="6324.11" item="Restart Wait" default="20">
<decVal min="0" max="255"/>
<label xml:lang="de">Wartezeit nach Kurzschluss: </label>
<label xml:lang="fr">Activation d'après court-circuit: </label>
<label xml:lang="nl">Wachttijd na kortsluiting: </label>
<label>Restart Wait after Short: </label>
<tooltip>Turn on automatically following a short circuit in 0.5 s steps. The standard value is equivalent to approx. 10 seconds. 0 turns off auto restart.</tooltip>
<tooltip xml:lang="de">Automatisches Einschalten nach einem Kurzschluss im 0,5 s Schritten. Der Standardwert entspricht ca. 10 Sekunden. (0 = schalte nicht wieder ein)</tooltip>
<tooltip xml:lang="fr">Activation automatique si court-circuit en étapes de 0,5 s. La valeur standard équivaut à env. 10 secondes. Valeur 0: automatique désactivé.</tooltip>
<tooltip xml:lang="nl">Wachttijd tot de herstart na kortsluiting. De standaardwaarde ca. 10 secondes. (Het instellen gebeurt in stappen van 0,5 s)</tooltip>
</variable>
</variables>
</decoder>
<pane>
<name>LNCV Configuration</name>
<name xml:lang="de">LNCV Konfiguration</name>
<name xml:lang="nl">LNCV instellingen</name>
<name xml:lang="fr">Configuration LNCV</name>
<name xml:lang="cs">Konfigurace LNCV</name>
<row>
<column>
<display item="Switch Address"/>
<label>
<text> </text>
</label>
<label>
<text>Current Status</text>
<text xml:lang="de">Aktueller Zustand</text>
<text xml:lang="fr">Condition Actuelle</text>
<text xml:lang="nl">Actuele Status</text>
</label>
<separator/>
<display item="Temperature"/>
<display item="Load"/>
</column>
<column>
<label>
<text>Before writing, open a Programming</text>
<text xml:lang="nl">Voordat je waarden schrijft eerst</text>
<text xml:lang="de">Bevor man Werten schreiben darf, zuerst mit Hilfe des LNCV</text>
<text xml:lang="fr">Avant qu'on peut écrire des valuers, demarrez</text>
<text xml:lang="cs">Před zápisem hodnot otevřete relaci programování</text>
</label>
<label>
<text>session using the LocoNet LNCV Tool.</text>
<text xml:lang="nl">een Programmeersessie starten met het LocoNet LNCV Gereedschap.</text>
<text xml:lang="de">Werkzeugs einen LNCV Programmieraufgang starten.</text>
<text xml:lang="fr">une session de programmation avec l'Util LNCV.</text>
<text xml:lang="cs">s použitím nástroje LocoNet Konfigurovat moduly LNCV.</text>
</label>
<label>
<text> </text>
</label>
<label>
<text>LNCV3 Configuration</text>
<text xml:lang="nl">Instelling LNCV3</text>
<text xml:lang="de">LNCV3 Konfiguration</text>
<text xml:lang="fr">Configuration LNCV3</text>
</label>
<separator/>
<display item="Configuration"/>
<display item="Switch STOP/GO" format="checkbox"/>
<display item="Booster All" format="checkbox"/>
<display item="Signal Off to Input" format="checkbox"/>
<display item="Send Short" format="checkbox"/>
<display item="Invert Outputs" format="checkbox"/>
<display item="Cut Out Hardware" format="checkbox"/>
<display item="Ignore DIP Switches" format="checkbox"/>
<group>
<separator/>
<qualifier>
<variableref>Ignore DIP Switches</variableref>
<relation>eq</relation>
<value>1</value>
</qualifier>
<row>
<display item="Booster Control"/>
</row>
<row>
<display item="DCC Brake" format="checkbox"/>
</row>
<row>
<display item="RailCom CutOut" format="checkbox"/>
</row>
</group>
</column>
<column>
<label>
<text>Time Settings</text>
<text xml:lang="nl">Tijdinstellingen</text>
<text xml:lang="de">Zeiteinstellungen</text>
<text xml:lang="fr">Configuration Temporelle</text>
</label>
<separator/>
<row>
<display item="Starting Phase Wait"/>
<display item="Starting Phase Wait" label="" format="hslider"/>
</row>
<row>
<display item="Restart Wait"/>
<display item="Restart Wait" label="" format="hslider"/>
</row>
<row>
<display item="DCC Cutout Time"/>
<display item="DCC Cutout Time" label="" format="hslider"/>
</row>
<label>
<text> </text>
</label>
<row>
<display item="Braking Signal"/>
<display item="Braking Signal" label="" format="hslider"/>
</row>
</column>
</row>
</pane>
</decoder-config>
Reference in New Issue View Git Blame Copy Permalink