Serge NOEL
148 lines
9.4 KiB
Plaintext
148 lines
9.4 KiB
Plaintext
<!DOCTYPE html>
|
|
<html lang="en">
|
|
<head>
|
|
<meta name="generator" content="HTML Tidy for HTML5 for Apple macOS version 5.8.0">
|
|
<title>JMRI: Set Signals at Throat-to-Throat Turnouts Help</title>
|
|
<meta name="author" content="Kevin Dickerson">
|
|
<meta name="keywords" content="JMRI help Layout Editor panel">
|
|
<!--#include virtual="/help/en/parts/Style.shtml" -->
|
|
</head>
|
|
<body>
|
|
<!--#include virtual="/help/en/parts/Header.shtml" -->
|
|
|
|
<div id="mBody">
|
|
<div id="mainContent" class="no-sidebar">
|
|
<h1>Set Signals at A Single/Double Slip</h1>
|
|
|
|
<h2>Introduction</h2>
|
|
|
|
<p>This tool provides an automated procedure for assigning signals at Single or double
|
|
slip.</p>
|
|
<a href="./images/Slip.png"><img src="./images/Slip.png" width="229" height="104" alt=
|
|
"set signals at slip"></a>
|
|
<p>If requested, this tool will place signal icons on the panel at the four entrances, to the
|
|
slip and will set up control logic for specified signal heads. Either one or two signal heads
|
|
may be placed at each leg of the slip. The continuing leg is the direct path through the slip
|
|
from either direction, while the diverging leg is the path that deviates from the direct
|
|
path.</p>
|
|
|
|
<p>Prior to selecting this tool, the slip must be on the panel with two turnouts assigned and
|
|
configured correct for each path, the required signal heads must also be in the Signal Head
|
|
Table. The control logic created by this tool only works correctly if each of the track
|
|
segments connected to the slip legs is assigned to a different block. it works best if the
|
|
track segment assigned to the slip is in a fifth different block, but this is not
|
|
required.</p>
|
|
|
|
<p>When this item is selected, a dialog is shown with a combo box to select the slip that is
|
|
on the current panel and the names (system or user) of six to eight signal heads to be
|
|
assigned to the two turnouts.</p>
|
|
|
|
<p>For each signal head, check boxes are available for selecting whether an icon is to be
|
|
placed on the panel, and whether control logic is to be created for the signal head.
|
|
Regardless of whether icons are placed or logic is created, Layout Editor will record that
|
|
the entered signal heads are assigned to the slip.</p>
|
|
|
|
<h3>The Set Signals at Slip Dialog</h3>
|
|
|
|
<p>In the drop down list select the Slip that is located on the panel that you wish to
|
|
configure, the name populated in the drop down box is made up of the turnout names used to
|
|
create the slip. On selecting the slip, if signals have already been assigned then this
|
|
information will automatically be populated.</p>
|
|
|
|
<p>The tool provides for entry of one or two signals at each leg of the slip, depending upon
|
|
the slip type and the leg selected.<br>
|
|
These signal heads show the status for moving through the direct or sliped path through the
|
|
slip. First the signal heads located at <strong>Turnout 1 - continuing track</strong> are
|
|
entered. The <strong>continuing track</strong> signal head is required, but the
|
|
<strong>diverging track</strong> entry is optional. If only the <strong>continuing
|
|
track</strong> signal head is entered, the tool assumes that head is signaling both tracks of
|
|
the other turnout, similar to when only one signal head is placed at the throat of a single
|
|
turnout.</p>
|
|
|
|
<p>Next the signal heads located at <strong>Turnout 1 - diverging track</strong> are entered.
|
|
Remember this is for when the path through the slip is set to be slipped. When two heads are
|
|
entered, the head closest to the slip signals the status of the direct path.<br>
|
|
Similarly, the signal heads located at <strong>Turnout 2 - continuing track</strong> and
|
|
<strong>Turnout 2 - diverging track</strong> are entered.</p>
|
|
|
|
<p>If there was a signal head previously assigned to any position, and you enter a
|
|
<em>different</em> signal head in the same place, the new signal head will replace the
|
|
previous signal head, and the icon of the previous signal head (if there was one) will be
|
|
deleted from the panel. Similarly, if you replace a previously assigned
|
|
<strong>Diverging</strong> signal head with a blank entry (no signal head), the previous
|
|
entry is deleted, and there will not be any signal head at that position. <strong>If a signal
|
|
head is changed, you must redo any logic that involves it.</strong> In particular, if you
|
|
delete a diverging signal head, you must redo the logic for the continuing signal head
|
|
located on the same track.</p>
|
|
|
|
<p>Check <strong>Add Signal Icon to Panel</strong> to request that an icon for a signal head
|
|
be placed on the panel at the turnout position indicated.</p>
|
|
|
|
<p>Check <strong>Set up Logic</strong> to request that the tool set up signal control logic
|
|
for a signal head. For each of these signal heads, the tool creates a Simple Signal Logic for
|
|
that head, and in addition creates a Logix that ensures that the turnout the signal is placed
|
|
on is not thrown against the leg the signal is placed on. The tool will attempt to setup the
|
|
logic and automatically fill in entries from the information available. If the tool does not
|
|
have enough information available to set up the logic, a message results, and you will have
|
|
to return later after more blocks (with occupancy sensors) and/or signals have been assigned
|
|
to turnouts and block boundaries on the panel.</p>
|
|
|
|
<h3>Notes</h3>
|
|
|
|
<p>The tool will set up the Simple Signal Logic to set all signals red if the slip is
|
|
occupied. If this is not what you want, you should edit the Simple Signal Logic by removing
|
|
the occupancy sensor of that block.</p>
|
|
|
|
<p>When setting up logic, this tool will follow track within a block until it finds a signal
|
|
at the end of the block away from the turnout being signaled. If your layout contains
|
|
sections that are signaled and sections that are not, to get this tool to set up logic
|
|
correctly, you may have to create and assign a virtual signal (a signal that does not
|
|
correspond to an actual signal on the layout) at the unsignaled end of the block that
|
|
connects track that is signaled with track that is not signaled. (You do not need to add an
|
|
icon for the virtual signal to your panel, but it must exist in your signal head table, and
|
|
must be assigned to a turnout or block boundary using a Set Signals ... tool.) If a block
|
|
ends with an end bumper, no virtual signal is required at the end bumper end.</p>
|
|
|
|
<p>If a block has an internal turnout (the turnout, and the track segments at its throat and
|
|
continuing legs are within the block), the program will expect signals at that turnout even
|
|
if it's not at the end of the block. However, at times the user may not want to signal a
|
|
seldom used turnout within a block. When following track through a block, the program will
|
|
skip over unsignaled internal turnouts if <strong>Skip Unsignaled Internal Turnouts</strong>
|
|
is checked in the Layout Editor <strong>Tools</strong> menu. It will always, however, warn
|
|
that it is doing so. <strong>Use this option with caution.</strong> There is no signal
|
|
protecting against a skipped turnout being set incorrectly, so if an unsignaled internal
|
|
turnout is not set correctly, derailed trains could result.</p>
|
|
|
|
<p>When setting up the Logix used in the control logic, the tool creates an internal sensor
|
|
to communicate with the Simple Signal Logic. The Logix will appear in your Logix table, and
|
|
the internal sensor will appear in your sensor table. The system names of the Logix and
|
|
internal sensor will be, IX or IS followed by TTT_HHH, where TTT is the system name of the
|
|
turnout where the signal head is located and HHH is the system name of the signal head. The
|
|
purpose of this Logix is to ensure that the aspect of the signal head will be red if the
|
|
turnout where the signal head is located is switched against the track the signal is on.</p>
|
|
|
|
<p>This tool sets up three-aspect signaling. When a signal head is showing the status when
|
|
moving to a diverging route, the tool will set up for limited speed (the least restrictive
|
|
aspect is not green, but yellow), and the signal will show yellow when it otherwise would
|
|
show green. You can change this with a simple edit (see below).</p>
|
|
|
|
<p>If you have a special situation at a signal, you may have to edit the information entered
|
|
by this tool into the Simple Signal Logic. If you would like four-aspect signaling, you can
|
|
easily manually edit the logic to achieve this. Similarly, by simple hand edits of the logic,
|
|
you can add approach lighting. If you don't want yellow when moving to the diverging route,
|
|
but prefer green, open the Simple Signal Logic for the head you want to change and uncheck
|
|
<strong>Limited Speed</strong>. The Simple Signal Logic dialog can be accessed from the popup
|
|
menu of each signal icon. If your special situation cannot be handled by Simple Signal Logic,
|
|
you should refer to Logix to tailor the signal logic to your needs.</p>
|
|
|
|
<p><strong>Please remember to save your panel after using this tool.</strong>
|
|
</p>
|
|
<!--#include virtual="/help/en/parts/Footer.shtml" -->
|
|
</div>
|
|
<!-- closes #mainContent-->
|
|
</div>
|
|
<!-- closes #mBody-->
|
|
<script src="/js/help.js"></script>
|
|
</body>
|
|
</html>
|