JIMRI/xml/signals/signalSpeeds.xml

<?xml version="1.0" encoding="utf-8"?>
<?xml-stylesheet href="/xml/XSLT/speedtable.xsl" type="text/xsl"?>
<speedtable xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://jmri.org/xml/schema/speedtable.xsd">
  <name>Speed Requirements for Signal Aspects</name>
  <reference>Speeds commonly associated to signals</reference>
  <copyright xmlns="http://docbook.org/ns/docbook">
    <year>2010</year>
    <year>2014</year>
    <holder>JMRI</holder>
  </copyright>
  <authorgroup xmlns="http://docbook.org/ns/docbook">
    <author>
      <personname>
        <firstname>Pete</firstname>
        <surname>Cressman</surname>
      </personname>
    </author>
    <author>
      <personname>
        <firstname>Suzie</firstname>
        <surname>Tall</surname>
      </personname>
    </author>
  </authorgroup>
  <revhistory xmlns="http://docbook.org/ns/docbook">
    <revision>
      <revnumber>1</revnumber>
      <date>2010-03-28</date>
      <authorinitials>PWC</authorinitials>
      <revremark>Initial version</revremark>
    </revision>
    <revision>
      <revnumber>1.1</revnumber>
      <date>2014-01-10</date>
      <authorinitials>ST</authorinitials>
      <revremark>Add new speeds of Sixty and Fifty to accomodate BNSF signal system definition</revremark>
    </revision>
    <revision>
      <revnumber>2</revnumber>
      <date>2015-03-20</date>
      <authorinitials>BJ</authorinitials>
      <revremark>Clean up, make monotonic (for use with new tests)</revremark>
    </revision>
  </revhistory>
  <!-- This file sets the values returned by the SignalSpeedMap class.  It is designed to -->
  <!-- set the defaults for running Warrants.  However uses other Warrants are possible.  -->
  <!-- If so, make the necessary changes you desire.  However,                            -->
  <!-- PLEASE DO NOT COMMIT ANY CHANGES TO THIS FILE THAT ARE INCOMPATIBLE WITH WARRANTS. -->
  <!-- Of course, nobody knows what the above line means, so perhaps the relevant         -->
  <!-- developers will define it further here.                                            -->
  <!-- Please read the comment above the 'interpretation' element which explains that a   -->
  <!-- warrant can use the values of 'aspectSpeeds' element in different ways.  More      -->
  <!-- details have been added.                                                           -->

  <!-- If you want to have your own version of this file not be overwritten with each new -->
  <!-- release of JMRI, put your custom version into your user preferences directory.     -->
  <!-- Note that the Warrants preferences pane can also write a file into the user        -->
  <!-- preferences directory.                                                             -->

  <!-- The "aspectSpeeds" table below maps the speed names used in signal aspects.xml  -->
  <!-- files to a number. The number may be translated to a throttle setting.  The     -->
  <!-- meaning of the number may be given different interpretations:               -->
  <!--   "percentNormal" is the percentage of the recorded speed, i.e. the speed       -->
  <!--      when running with no signals or aspect clear.  With this choice a speed    -->
  <!--      change will always be made when a restrictive aspect is signaled.  Use     -->
  <!--      care that the values are not too low, as that may stop the train when only -->
  <!--      a reduction of speed was desired given that one may be taking a percentage -->
  <!--      of a slow recorded speed.                                                  -->
  <!--   "percentThrottle" is the percentage of the full throttle speed, i.e. the      -->
  <!--      number is an absolute throttle setting.  This choice is best when the      -->
  <!--      motive roster is speed matched and one chooses values that has the trains  -->
  <!--      moving at scale speeds close to what the aspect requires.                  -->
  <interpretation>percentNormal</interpretation>

  <!-- Speed changes are ramped from the current speed to the next in increments.      -->
  <!-- The msPerIncrement parameter is the delay in milliseconds between sending speed -->
  <!-- increments sent to the throttle.   -->
  <msPerIncrement>750</msPerIncrement>

  <!-- stepsPerIncrement is the number of throttle speed increments to use per the -->
  <!-- above ms time. The time needed to ramp a speed change can be shortened      -->
  <!-- by increasing the number of throttle speed increments.                      -->
  <stepsPerIncrement>1</stepsPerIncrement>

  <!-- Map speed names to ratios used in throttle settings                            -->
  <!-- Speed names may be put into aspect.xml files to indicate speed for the aspect. -->
  <!-- Each speed name is a "speed notch" and additional notch names can be added -   -->
  <!-- however the names must match those in the "appearanceSpeeds" table below for   -->
  <!-- signal Heads and those used in "aspects.xml" file for Signal Masts.            -->
  <!-- If you change these, make the related changes in xml/schema/aspecttable.xsd    -->
  <!-- These speeds are enforced at the entrance to a block.  Any speed name used in  -->
  <!-- any signal aspect.xml file should appear in the aspect speeds table below.     -->
  <!-- The order of these here is enforced by the schema.  The values must be         -->
  <!-- decreasing from one element to the next.                                       -->
  <aspectSpeeds>
    <Cab>120</Cab>
    <Maximum>119</Maximum>
    <Normal>100</Normal>
    <Sixty>90</Sixty>
    <Fifty>80</Fifty>
    <Limited>65</Limited>
    <Medium>50</Medium>
    <Slow>30</Slow>
    <Restricted>15</Restricted>
    <RestrictedSlow>10</RestrictedSlow>
    <Stop>0</Stop>
  </aspectSpeeds>

  <!-- Speeds associated with SignalHead appearances for heads NOT used in SignalMasts. -->
  <!-- Appearance names are those listed in jmri.implementation.DefaultSignalHead       -->
  <!-- Speed names must agree with the names in the above "aspectSpeeds" element.       -->
  <!-- Warrants enforce these speeds at the entrance to a block.                         -->
  <appearanceSpeeds>
    <SignalHeadStateRed>Stop</SignalHeadStateRed>
    <SignalHeadStateFlashingRed>Restricted</SignalHeadStateFlashingRed>
    <SignalHeadStateGreen>Normal</SignalHeadStateGreen>
    <SignalHeadStateFlashingGreen>Normal</SignalHeadStateFlashingGreen>
    <SignalHeadStateYellow>Medium</SignalHeadStateYellow>
    <SignalHeadStateFlashingYellow>Limited</SignalHeadStateFlashingYellow>
    <SignalHeadStateLunar>Restricted</SignalHeadStateLunar>
    <SignalHeadStateFlashingLunar>Slow</SignalHeadStateFlashingLunar>
  </appearanceSpeeds>
</speedtable>