Files
2026-06-17 14:00:51 +02:00

129 lines
5.2 KiB
Plaintext

<!DOCTYPE html>
<html lang="en">
<head>
<meta name="generator" content="HTML Tidy for HTML5 for Apple macOS version 5.8.0">
<!-- Copyright ($Author: jacobsen $) 2009 -->
<title>B&amp;O 1980 Signaling Definition</title>
<!--#include virtual="/Style.shtml" -->
</head>
<body>
<!--#include virtual="/Header.shtml" -->
<div id="mBody">
<div id="mainContent" class="no-sidebar">
<h1>B&amp;O 1980 Signaling Definition</h1>
This directory contains signaling definitions corresponding to the Chessie System 1980 rule
book for the B&amp;O RR.
<p>Chessie System's 1980 rule book listed separate signal rules sections for the three
component road. Rules 281 through 292 applied to the C&amp;O, B-281 through B-292 applied to
the B&amp;O, and W-281 through W-292 applied to the Western Maryland.</p>
<p>The 1980 rules for the B&amp;O lacked a slow clear indication. The slow clear indication
had been present in the past and would be added back at some point in the following years.
The former slow clear indication was renamed slow approach slow and allowed for maximum
authorized speed if enough distance permitted it before approaching the next signal.</p>
<p>There are 8 types of CPL signals included in this definition. Six mast sets and two
dwarfs. The icons will display the necessary markers when needed eliminating the need to
guess which ones are needed. One can create there route in the layout editor and see how the
physical signals need to be configured before buying parts. Only the NJ International set has
pre defined markers to match their pre-built #1214 signal.</p>
<p>Four of the CPL masts have shortblock in their name and are to be used in locations of
short braking distances. These signals are mapped to protect signals displaying Approach with
Approach Medium.</p>
<p>This signal system uses blocks and turnout speed settings for its logic irrespective of
turnout position. For best results it is recommended you set up your layout in the layout
editor and create the necessary blocks and assign speeds to them. Recognized speeds are
Normal, Limited, Medium, Slow, and Restricted. The signal system will use these speeds to
pick between the possible aspects.</p>
<p>To use the CPL files you need to set up the signal as three heads. The top 3 markers are
the first head, the main disk is the second head, then the lower three markers comprise the
third head. The dwarf signal is set up the same way. The permissive CPLs need two signal
heads. The top markers makeup the first head and the main disc make up the second head.
Permissive CPLs will not have lower markers. The NJ International set needs two heads. The
top center marker is green, the left upper marker is yellow, and the bottom center marker is
red. The main disc makes up the second head.</p>
<p>I am not an expert on the B&amp;O semaphore signals. These definitions come straight from
the rule books and may have been used in conjunction with CPLs. They lack a lot of the
necessary aspects and indications to be a complete signal system on their own.</p>
<p>See the <a href="aspects.xml">aspect page</a>.</p>
<p>Signal Mast definitions:</p>
<ul>
<li>
<a href="appearance-CPL-High.xml">Color Position Light Mast Signals</a>
</li>
<li>
<a href="appearance-CPL-High-shortblock.xml">Color Position Light Mast Signals Short
Block</a>
</li>
<li>
<a href="appearance-CPL-Dwarf.xml">Color Position Light Dwarf Signals</a>
</li>
<li>
<a href="appearance-CPL-Dwarf-shortblock.xml">Color Position Light Dwarf Signals Short
Block</a>
</li>
<li>
<a href="appearance-CPL-High-permissive.xml">Permissive Color Position Light Mast
Signals</a>
</li>
<li>
<a href="appearance-CPL-High-permissive-shortblock.xml">Permissive Color Position Light
Mast Signals Short Block</a>
</li>
<li>
<a href="appearance-CPL-High-NJInternational.xml">NJ International CPL Signal Item
#1214</a>
</li>
<li>
<a href="appearance-CPL-High-NJInternational-shortblock.xml">NJ International CPL Signal
Item #1214 Short Block</a>
</li>
<li>
<a href="appearance-Semaphore-3Arm.xml">Triple Arm Semaphore Mast Signals</a>
</li>
<li>
<a href="appearance-Semaphore-2Arm.xml">Double Arm Semaphore Mast Signals</a>
</li>
<li>
<a href="appearance-Semaphore-1Armwithmarker.xml">Single Arm Semaphore Mast Signals with
Lower Marker</a>
</li>
<li>
<a href="appearance-Semaphore-1Arm.xml">Single Arm Semaphore Mast Signals</a>
</li>
<li>
<a href="appearance-Semaphore-1ArmDwarf.xml">Single Arm Semaphore Dwarf Signals</a>
</li>
</ul>
<!--#include virtual="/Footer.shtml" -->
</div>
<!-- closes #mainContent-->
</div>
<!-- closes #mBody-->
<script src="/js/main.js"></script>
</body>
</html>