docs: German and English documentation for the NFC-only mode
This commit is contained in:
1 parent
728c40f0fa
commit
696b8ba518
6 files changed
+168
-26
No files matched your search
@@ -1,6 +1,76 @@
|
||||
# NFC-only mode
|
||||
|
||||
## Description
|
||||
It may be convenient to have a small device near your desktop computer when adding new spools to your database.
|
||||
So you are able to write NFC-tags for them right away. Since there is no need for a scale (the weight of a new
|
||||
It may be convenient to have a small device near your desktop computer when adding new spools to your database.
|
||||
So you are able to write NFC-tags for them right away. Since there is no need for a scale (the weight of a new
|
||||
spool should be well known), it is pleasant to leave the scale functionality out in advance of a smaller footprint.
|
||||
|
||||

|
||||
|
||||
## Usage
|
||||
|
||||
Before you can use the NFC-only device, you have to register it to your FilaMan System App as
|
||||
you would do with any regular scale device.
|
||||
|
||||
### Tag Writing
|
||||
Its main purpose is to write new NFC tags.
|
||||
|
||||
You start the writing process from within the FilaMan System App (Web GUI). You than select
|
||||
your NFC device and follow the instructions on the device display.
|
||||
|
||||
### Tag Reading
|
||||
Although the device is fully capable of tag reading, its use cases are limited due to the lack of a scale.
|
||||
But you can still identify a spool and assign it to a location with the according location tag.
|
||||
|
||||
But to be honest: the main purpose of the NFC-only device is **TAG WRITING**.
|
||||
|
||||
## NFC-only mode
|
||||
|
||||
During startup, the ESP32 tries to detect the HX711 (amplifier) together with a connected
|
||||
loadcell sensor. If successful it starts into normal mode with full functionality.
|
||||
|
||||
Otherwise it switches in **NFC-only mode!**
|
||||
|
||||
Instead of a weight reading the display shows a ready prompts. Additionally the scale icon
|
||||
in the top row is crossed out.
|
||||
|
||||

|
||||
|
||||
## Build / Installation
|
||||
### Hardware
|
||||
The wiring of the hardware is the same as the original, fully equipped FilaMan scale. There are only 3 differences:
|
||||
|
||||
- No HX711 connected (also no loadcell of course)
|
||||
- No touch sensor (without scale there is no need to tare)
|
||||
- optional: 10k pull-up resistor on Pin 16 (RX2)
|
||||
|
||||
The pull-up resistor is not mandatory, but for good measure. It makes it more reliable to
|
||||
detect a missing hx711. But it should also work w/o the pull-up resistor.
|
||||
|
||||

|
||||
|
||||
| Component | ESP32 Pin |
|
||||
| ---- | ---- |
|
||||
| 10k pull-up | 16 |
|
||||
| | 17 |
|
||||
| OLED SDA | 21 |
|
||||
| OLED SCL. | 22 |
|
||||
| PN532 IRQ | 32 |
|
||||
| PN532 RESET | 33 |
|
||||
| PN532 SDA | 21 |
|
||||
| PN532 SCL | 22 |
|
||||
|
||||
#### PN532
|
||||
- !! Make sure that the DIP switches on the PN532 are set to I2C
|
||||
- Connect `VCC` to 5V
|
||||
|
||||
#### OLED
|
||||
- Connect `VCC` to 3.3V
|
||||
|
||||
#### 10k Resistor (optional)
|
||||
- Connect to PIN 16 (where normally the DOUT of the HX711 would connect to) and 5V
|
||||
|
||||
### Software
|
||||
Follow the instructions in the [main readme](../README.md#step-by-step-installation).
|
||||
|
||||
You need version 3.3.1 or later for a working hardware recognition and NFC-only mode.
|
||||
Reference in new issue
Block a user