docs: German and English documentation for the NFC-only mode
This commit is contained in:
1 parent
728c40f0fa
commit
696b8ba518
6 files changed
+168
-26
No files matched your search
@@ -0,0 +1,70 @@
|
||||
# NFC-only Modus
|
||||
|
||||
## Beschreibung
|
||||
Es kann praktisch sein, ein kleines Gerät in der Nähe deines Desktop-Computers zu haben, wenn du neue Spulen in deine Datenbank hinzufügst.
|
||||
So kannst du sofort NFC-Tags für sie schreiben. Da keine Waage erforderlich ist (das Gewicht einer neuen Spule ist in der Regel bekannt), ist es sinnvoll, auf diese Funktion zu verzichten, um einen kleineren Formfaktor zu erreichen.
|
||||
|
||||

|
||||
|
||||
## Bedienung
|
||||
|
||||
Bevor du das NFC-only Terminal verwenden kannst, musst du es in der `FilaMan System App` registrieren, wie bei jeder anderen Waage auch.
|
||||
|
||||
### Tag schreiben
|
||||
Hauptzweck ist das Schreiben neuer NFC-Tags.
|
||||
|
||||
Du startest den Schreibvorgang in der `FilaMan System App` (Web-GUI). Dann wählst du dein NFC-Gerät aus und folgst den Anweisungen auf dem Display.
|
||||
|
||||
### Tag lesen
|
||||
Das Gerät kann Tags zwar lesen, sinnvolle Anwendungsfälle sind jedoch ohne Waage eingeschränkt.
|
||||
Du kannst trotzdem eine Spule identifizieren und ihr einen Standort mit dem entsprechenden Standort-Tag zuweisen.
|
||||
|
||||
Aber ehrlich gesagt: der Hauptzweck des NFC-only Gerätes ist **TAG SCHREIBEN**.
|
||||
|
||||
## NFC-only Modus
|
||||
|
||||
Beim Start versucht der ESP32, den HX711 (Verstärker) zusammen mit einem angeschlossenen Loadcell-Sensor zu erkennen. Wenn das gelingt, startet er im Normalmodus mit voller Funktionalität.
|
||||
|
||||
Andernfalls schaltet er in den **NFC-only Modus**!
|
||||
|
||||
Statt einer Gewichtsanzeige zeigt das Display eine Bereitschaftsmeldung. Zusätzlich ist das Waagensymbol in der oberen Zeile durchgestrichen.
|
||||
|
||||

|
||||
|
||||
## Aufbau / Installation
|
||||
### Hardware
|
||||
Die Verkabelung der Hardware ist gleich wie bei der originalen, voll ausgestatteten FilaMan-Waage. Es gibt nur 3 Unterschiede:
|
||||
|
||||
- Kein HX711 angeschlossen (und natürlich keine Loadcell)
|
||||
- Kein Tastensensor (ohne Waage ist kein Tarieren nötig)
|
||||
- optional: 10k Pull-up-Widerstand an Pin 16 (RX2)
|
||||
|
||||
Der Pull-up-Widerstand ist nicht zwingend erforderlich, erhöht aber die Zuverlässigkeit beim Erkennen eines fehlenden HX711. Ohne Pull-up-Widerstand sollte es aber ebenfalls funktionieren.
|
||||
|
||||

|
||||
|
||||
| Komponente | ESP32 Pin |
|
||||
| ---- | ---- |
|
||||
| 10k Pull-up | 16 |
|
||||
| | 17 |
|
||||
| OLED SDA | 21 |
|
||||
| OLED SCL | 22 |
|
||||
| PN532 IRQ | 32 |
|
||||
| PN532 RESET | 33 |
|
||||
| PN532 SDA | 21 |
|
||||
| PN532 SCL | 22 |
|
||||
|
||||
#### PN532
|
||||
- **!! Stelle sicher, dass die DIP-Schalter des PN532 auf I2C gestellt sind**
|
||||
- Verbinde `VCC` mit 5V
|
||||
|
||||
#### OLED
|
||||
- Verbinde `VCC` mit 3,3V
|
||||
|
||||
#### 10k Widerstand (optional)
|
||||
- Verbinde den Widerstand mit PIN 16 (wo normalerweise der DOUT des HX711 angeschlossen wäre) und 5V
|
||||
|
||||
### Software
|
||||
Folge den Anweisungen in der [Hauptdokumentation](../README.de.md#schritt-für-schritt-installation).
|
||||
|
||||
Du benötigst Version 3.3.1 oder neuer für eine funktionierende Hardware-Erkennung und den NFC-only Modus.
|
||||
@@ -1,6 +1,76 @@
|
||||
# NFC-only mode
|
||||
|
||||
## Description
|
||||
It may be convenient to have a small device near your desktop computer when adding new spools to your database.
|
||||
So you are able to write NFC-tags for them right away. Since there is no need for a scale (the weight of a new
|
||||
It may be convenient to have a small device near your desktop computer when adding new spools to your database.
|
||||
So you are able to write NFC-tags for them right away. Since there is no need for a scale (the weight of a new
|
||||
spool should be well known), it is pleasant to leave the scale functionality out in advance of a smaller footprint.
|
||||
|
||||

|
||||
|
||||
## Usage
|
||||
|
||||
Before you can use the NFC-only device, you have to register it to your FilaMan System App as
|
||||
you would do with any regular scale device.
|
||||
|
||||
### Tag Writing
|
||||
Its main purpose is to write new NFC tags.
|
||||
|
||||
You start the writing process from within the FilaMan System App (Web GUI). You than select
|
||||
your NFC device and follow the instructions on the device display.
|
||||
|
||||
### Tag Reading
|
||||
Although the device is fully capable of tag reading, its use cases are limited due to the lack of a scale.
|
||||
But you can still identify a spool and assign it to a location with the according location tag.
|
||||
|
||||
But to be honest: the main purpose of the NFC-only device is **TAG WRITING**.
|
||||
|
||||
## NFC-only mode
|
||||
|
||||
During startup, the ESP32 tries to detect the HX711 (amplifier) together with a connected
|
||||
loadcell sensor. If successful it starts into normal mode with full functionality.
|
||||
|
||||
Otherwise it switches in **NFC-only mode!**
|
||||
|
||||
Instead of a weight reading the display shows a ready prompts. Additionally the scale icon
|
||||
in the top row is crossed out.
|
||||
|
||||

|
||||
|
||||
## Build / Installation
|
||||
### Hardware
|
||||
The wiring of the hardware is the same as the original, fully equipped FilaMan scale. There are only 3 differences:
|
||||
|
||||
- No HX711 connected (also no loadcell of course)
|
||||
- No touch sensor (without scale there is no need to tare)
|
||||
- optional: 10k pull-up resistor on Pin 16 (RX2)
|
||||
|
||||
The pull-up resistor is not mandatory, but for good measure. It makes it more reliable to
|
||||
detect a missing hx711. But it should also work w/o the pull-up resistor.
|
||||
|
||||

|
||||
|
||||
| Component | ESP32 Pin |
|
||||
| ---- | ---- |
|
||||
| 10k pull-up | 16 |
|
||||
| | 17 |
|
||||
| OLED SDA | 21 |
|
||||
| OLED SCL. | 22 |
|
||||
| PN532 IRQ | 32 |
|
||||
| PN532 RESET | 33 |
|
||||
| PN532 SDA | 21 |
|
||||
| PN532 SCL | 22 |
|
||||
|
||||
#### PN532
|
||||
- !! Make sure that the DIP switches on the PN532 are set to I2C
|
||||
- Connect `VCC` to 5V
|
||||
|
||||
#### OLED
|
||||
- Connect `VCC` to 3.3V
|
||||
|
||||
#### 10k Resistor (optional)
|
||||
- Connect to PIN 16 (where normally the DOUT of the HX711 would connect to) and 5V
|
||||
|
||||
### Software
|
||||
Follow the instructions in the [main readme](../README.md#step-by-step-installation).
|
||||
|
||||
You need version 3.3.1 or later for a working hardware recognition and NFC-only mode.
|
||||
Reference in new issue
Block a user