* Pull untouched upstream TinySoundFont Start from the upstream TinySoundFont by @schellingb at https://github.com/schellingb/TinySoundFont and rearchitect the MIDI processing. * Convert to PROGMEM-based SoundFont structures. This makes it much faster to access the SoundFont and also removes all the static RAM usage. The samples, the regions, the instruments are all now in ROM. Only the dynamic voices and related info takes up RAM. No caching. * (Re)convert to fixed point math. TSF upstream is built for systems with real floating point units (and produces great sound with it!), but processors like the Pico, ESP8266, and several models of ESP32 don't have one so emulate FP in *extremely* slow SW. Use fixed point (integer) representations for the inner loop and wherever possible to avoid `float` math. For processors like the Pico 2 or original ESP32 with hardware FPUs this still increases performance since integer is still much faster. * Redo the example and add default SF2s Rewrite the MIDI examples to use PROGMEM for both SF2 and MID file. It simplifies life for the casual user and me. * Breaking change The MIDI object now has a `midi::SetSoundFont(tsf *)` instead of a `midi::SetSoundfont(AudioFileSource *)`. It no longer supports reading SF2 from LittleFS or SD.
74 lines
2.1 KiB
Arduino
74 lines
2.1 KiB
Arduino
// PlayMIDIFromROM
|
|
// Released to the public domain (2025) by Earle F. Philhower, III <earlephilhower@yahoo.com>
|
|
#include <Arduino.h>
|
|
#ifdef ESP8266
|
|
#include <ESP8266WiFi.h>
|
|
#else
|
|
#include <WiFi.h>
|
|
#endif
|
|
#include <ESP8266Audio.h>
|
|
|
|
// Define the SF2 (SoundFont) to use. Will be stored in PROGMEM as global _tsf
|
|
#ifdef ESP8266
|
|
// The ESP8266 has a 1MB ROM limit so use a smaller SF2 file
|
|
#include <libtinysoundfont/scratch2010.h>
|
|
#else
|
|
// Pico and ESP32 can have up to 16MB ROMs, use the 1M General MIDI (1mgm) font or your own
|
|
// For ESP32 be sure to use HUGE APP or another partition mode which allows you to have sketches larger than 1-2MB
|
|
|
|
#include <libtinysoundfont/1mgm.h>
|
|
#endif
|
|
|
|
// Select one of the following in order of CPU limitations. You can also use your own.
|
|
//#include "furelise_mid.h"
|
|
//#include "venture_mid.h"
|
|
#include "jm_mozdi_mid.h"
|
|
|
|
// Note that the .MID file does NOT need to be in PROGMEM, it just makes the examples easier to use (no FS upload required).
|
|
AudioFileSourcePROGMEM *midfile;
|
|
|
|
// Any AudioOutput* would work here (AudioOutputPWM, AudioOutputI2SNoDAT, etc.)
|
|
AudioOutputI2S *dac;
|
|
|
|
// The MIDI wavetable synthesizer
|
|
AudioGeneratorMIDI *midi;
|
|
|
|
|
|
void setup() {
|
|
WiFi.mode(WIFI_OFF);
|
|
|
|
Serial.begin(115200);
|
|
Serial.println("Starting up...\n");
|
|
|
|
audioLogger = &Serial;
|
|
midfile = new AudioFileSourcePROGMEM(_mid, sizeof(_mid));
|
|
|
|
dac = new AudioOutputI2S();
|
|
dac->SetPinout(0, 1, 2); // Adjust to your I2S DAC pinout
|
|
dac->SetGain(0.5);
|
|
midi = new AudioGeneratorMIDI();
|
|
midi->SetSoundFont(&_tsf);
|
|
// If you get audio clicks/break up then you can decrease the sample rate. You can also try increasing this if your MIDs are simple enough and the chip fast enough
|
|
midi->SetSampleRate(22050);
|
|
|
|
Serial.printf("BEGIN...\n");
|
|
midi->begin(midfile, dac);
|
|
}
|
|
|
|
void loop() {
|
|
static int cnt, lcnt;
|
|
if (midi->isRunning()) {
|
|
if (!midi->loop()) {
|
|
midi->stop();
|
|
} else {
|
|
if (++cnt == 10000) {
|
|
Serial.printf("Loop %d\n", ++lcnt * 1000);
|
|
cnt = 0;
|
|
}
|
|
}
|
|
} else {
|
|
Serial.printf("MIDI done\n");
|
|
delay(1000);
|
|
}
|
|
}
|