/* AudioOutputI2S Base class for I2S interface port Copyright (C) 2017 Earle F. Philhower, III This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include #ifdef ESP32 #include "driver/i2s.h" #else #include #endif #include "AudioOutputI2S.h" AudioOutputI2S::AudioOutputI2S(int port) { #ifdef ESP32 if (!i2sOn) { i2s_config_t i2s_config_dac = { .mode = (i2s_mode_t)(I2S_MODE_MASTER | I2S_MODE_TX), .sample_rate = 44100, .bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT, .channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT, .communication_format = (i2s_comm_format_t)(I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB), .intr_alloc_flags = ESP_INTR_FLAG_LEVEL1, // high interrupt priority .dma_buf_count = 8, .dma_buf_len = 64, //Interrupt level 1 .use_apll = 1 // Use audio PLL }; i2s_driver_install((i2s_port_t)portNo, &i2s_config_dac, 0, NULL); SetPinout(26, 25, 22); i2s_zero_dma_buffer((i2s_port_t)portNo); } #else if (!i2sOn) { i2s_begin(); } #endif i2sOn = true; portNo = port; mono = false; SetGain(1.0); } AudioOutputI2S::~AudioOutputI2S() { #ifdef ESP32 if (!i2sOn) { i2s_driver_uninstall((i2s_port_t)portNo); //stop & destroy i2s driver } #else if (i2sOn) i2s_end(); #endif i2sOn = false; } bool AudioOutputI2S::SetPinout(int bclk, int wclk, int dout) { #ifdef ESP32 i2s_pin_config_t pins = { .bck_io_num = bclk, .ws_io_num = wclk, .data_out_num = dout, .data_in_num = I2S_PIN_NO_CHANGE }; i2s_set_pin((i2s_port_t)portNo, &pins); return true; #else (void) bclk; (void) wclk; (void) dout; return false; #endif } bool AudioOutputI2S::SetRate(int hz) { // TODO - have a list of allowable rates from constructor, check them this->hertz = hz; #ifdef ESP32 i2s_set_sample_rates((i2s_port_t)portNo, AdjustI2SRate(hz)); #else i2s_set_rate(AdjustI2SRate(hz)); #endif return true; } bool AudioOutputI2S::SetBitsPerSample(int bits) { if ( (bits != 16) && (bits != 8) ) return false; this->bps = bits; return true; } bool AudioOutputI2S::SetChannels(int channels) { if ( (channels < 1) || (channels > 2) ) return false; this->channels = channels; return true; } bool AudioOutputI2S::SetOutputModeMono(bool mono) { this->mono = mono; return true; } bool AudioOutputI2S::begin() { return true; } bool AudioOutputI2S::ConsumeSample(int16_t sample[2]) { MakeSampleStereo16( sample ); if (this->mono) { // Average the two samples and overwrite uint32_t ttl = sample[LEFTCHANNEL] + sample[RIGHTCHANNEL]; sample[LEFTCHANNEL] = sample[RIGHTCHANNEL] = (ttl>>1) & 0xffff; } uint32_t s32 = ((Amplify(sample[RIGHTCHANNEL]))<<16) | (Amplify(sample[LEFTCHANNEL]) & 0xffff); #ifdef ESP32 return i2s_push_sample((i2s_port_t)portNo, (const char *)&s32, 0); #else return i2s_write_sample_nb(s32); // If we can't store it, return false. OTW true #endif } bool AudioOutputI2S::stop() { #ifdef ESP32 i2s_zero_dma_buffer((i2s_port_t)portNo); #endif return true; }