28 Commits
Author SHA1 Message Date
Earle F. Philhower, III a0a4a00757 Fix release numbering 2024-09-21 09:26:24 -07:00
Earle F. Philhower, III c93201483f Update pr-or-master-push.yml (#687) 2024-06-06 14:59:31 -07:00
Earle F. Philhower, III a6141473fb Update for ESP32 Arduino 3.x (#685)
Implement the renamed network client and other API changes when built
under the 3.x branch of the Arduino ESP32 core.

Disable building TSF on the ESP32, the Xtensa G++ backend bug is still there.

Minimal changes to get I2S to build under new IDF.  Deprecated but
not removed, so warnings are expected but should not be fatal in
use.

Fixes #683
2024-06-06 14:43:45 -07:00
ChuckMash b837e7d36a Stop output on OOM in MP3 (#658) 2024-04-25 17:53:07 -07:00
Infinity 51a584c2b7 Update AudioGeneratorRTTTL.cpp for dotted length (#668) 2024-04-25 17:51:42 -07:00
Earle F. Philhower, III 492a5beba4 Update GH CI actions to latest (#681) 2024-04-17 10:22:17 -07:00
Earle F. Philhower, III 89a5a07712 Get ESP32 CI builds working again (#680) 2024-04-17 10:11:03 -07:00
Earle F. Philhower, III b3c41668a2 Fix GCC12.3 new warnings for RP2040 (#679)
* Fix GCC12.3 new warnings for RP2040

* Remove OPUS encoder, not supported on embedded
2024-04-16 16:32:16 -07:00
Earle F. Philhower, III 139fba4116 Update opusfile.c (#678) 2024-04-16 15:14:14 -07:00
Earle F. Philhower, III b7d89058dd Update polyphase.c 2024-04-16 15:11:31 -07:00
Earle F. Philhower, III e306df208c Update AudioOutputSPDIF.h 2024-04-16 15:10:49 -07:00
Earle F. Philhower, III f6c0d562f8 Update AudioOutputSPDIF.cpp (#677) 2024-04-16 15:10:24 -07:00
KDM 60b93433d8 Update README.md (#675)
Corrected format to formant.
2024-04-16 14:55:52 -07:00
Nils Trubkin 0abcf71012 Add ability to SwapClocks(bool) on I2S. rp2040 only. (#639)
Fixes #638
2023-06-30 11:02:49 -07:00
Earle F. Philhower, III 12131e9826 Update README.md 2023-01-28 14:32:54 -08:00
Sylwester 4ba7df1928 Add support for I2S MCLK. (#594) 2023-01-04 09:46:05 -08:00
Earle F. Philhower, III 0b5da0e9dd Add PWMAudio support for the RP2040 (#597)
Uses the RP2040 HW PWM generator to provide a stereo audio signal.
2023-01-03 17:08:56 -08:00
lovyan03 46b36574ed fix: Invalid data is assigned to the right channel when playing a mono MP3. (#559) 2022-09-04 13:27:05 -07:00
FedericoBusero f95f15fcb3 I2S: register I2S object to platform failed (#568)
ESP32: When calling destructor after stop, and then create a new object, then an error is shown "I2S: register I2S object to platform failed" because i2s_driver_uninstall had not been called.
ESP8266 : i2s_end is not called when stopping, but i2sOn is false, resulting in new call i2s_rxtx_begin
2022-09-01 12:16:14 -07:00
Earle F. Philhower, III 72ed4f76dd Update pr-or-master-push.yml 2022-09-01 12:15:29 -07:00
Earle F. Philhower, III a323627243 Update pr-or-master-push.yml 2022-08-31 10:54:49 -07:00
刘帅 93c4e3a15a Fix build support gcc8 for other arch (#567) 2022-08-31 10:54:19 -07:00
Earle F. Philhower, III bf31f0f8be Update macros.h 2022-08-31 10:52:24 -07:00
FedericoBusero e24223e3d5 ESP32: Fix compilation of I2S in Arduino ESP32 core 1.0.6 (#565) 2022-08-24 12:49:24 -07:00
TorrenteroandEdgar 6d3b8665f4 sketch_utils.sh now uses flags and breaks current functionality (#555)
Co-authored-by: Edgar <edgar.coria@xema.tech>
2022-07-16 18:05:28 -07:00
Earle F. Philhower, III 02225bcaa9 Fix overflow with x256 oversampling in I2SNoDAC (#543)
Fixes #542
2022-06-14 08:23:22 -07:00
Earle F. Philhower, III c4bf70bccf Fix typo in README (#541)
Fixes #540
2022-06-13 08:32:18 -07:00
TorrenteroandEdgar 3b329b8201 fixed: tmpSourceSamplePositionF32P32 jumping to incorrect position causing distorted sound (#539)
Co-authored-by: Edgar <edgar.coria@xema.tech>
2022-06-10 17:57:53 -07:00
38 changed files with 11759 additions and 183 deletions

No files matched your search

+11 -11
View File
@@ -20,10 +20,10 @@ jobs:
matrix: matrix:
chunk: [0, 1, 2, 3, 4] chunk: [0, 1, 2, 3, 4]
steps: steps:
- uses: actions/checkout@v2 - uses: actions/checkout@v4
with: with:
submodules: true submodules: true
- uses: actions/setup-python@v2 - uses: actions/setup-python@v5
with: with:
python-version: '3.x' python-version: '3.x'
- name: Build Sketches - name: Build Sketches
@@ -43,10 +43,10 @@ jobs:
matrix: matrix:
chunk: [0, 1, 2, 3, 4] chunk: [0, 1, 2, 3, 4]
steps: steps:
- uses: actions/checkout@v2 - uses: actions/checkout@v4
with: with:
submodules: true submodules: true
- uses: actions/setup-python@v2 - uses: actions/setup-python@v5
with: with:
python-version: '3.x' python-version: '3.x'
- name: Build Sketches - name: Build Sketches
@@ -66,10 +66,10 @@ jobs:
matrix: matrix:
chunk: [0, 1, 2, 3, 4] chunk: [0, 1, 2, 3, 4]
steps: steps:
- uses: actions/checkout@v2 - uses: actions/checkout@v4
with: with:
submodules: true submodules: true
- uses: actions/setup-python@v2 - uses: actions/setup-python@v5
with: with:
python-version: '3.x' python-version: '3.x'
- name: Build Sketches - name: Build Sketches
@@ -87,10 +87,10 @@ jobs:
name: Host tests name: Host tests
runs-on: ubuntu-latest runs-on: ubuntu-latest
steps: steps:
- uses: actions/checkout@v2 - uses: actions/checkout@v4
with: with:
submodules: true submodules: true
- uses: actions/setup-python@v2 - uses: actions/setup-python@v5
with: with:
python-version: '3.x' python-version: '3.x'
- name: Run host tests - name: Run host tests
@@ -115,7 +115,7 @@ jobs:
lint: lint:
runs-on: ubuntu-latest runs-on: ubuntu-latest
steps: steps:
- uses: actions/checkout@v2 - uses: actions/checkout@v4
- uses: arduino/arduino-lint-action@v1 - uses: arduino/arduino-lint-action@v1
with: with:
library-manager: 'update' library-manager: 'update'
@@ -128,11 +128,11 @@ jobs:
run: run:
shell: bash shell: bash
steps: steps:
- uses: actions/checkout@v2 - uses: actions/checkout@v4
with: with:
submodules: true submodules: true
- name: Run codespell - name: Run codespell
uses: codespell-project/actions-codespell@master uses: codespell-project/actions-codespell@master
with: with:
skip: ./src/libmad,./src/libhelix-aac,./src/libopus skip: ./src/libmad,./src/libhelix-aac,./src/libopus,./src/libflac
ignore_words_list: ESP8266,esp8266,esp,dout,DOUT,ser,ans,inout,numer,hist ignore_words_list: ESP8266,esp8266,esp,dout,DOUT,ser,ans,inout,numer,hist
+18 -26
View File
@@ -1,39 +1,30 @@
# ESP8266Audio - supports ESP8266 & ESP32 & Raspberry Pi RP2040 [![Gitter](https://badges.gitter.im/ESP8266Audio/community.svg)](https://gitter.im/ESP8266Audio/community?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge) # ESP8266Audio - supports ESP8266 & ESP32 & Raspberry Pi Pico RP2040 [![Gitter](https://badges.gitter.im/ESP8266Audio/community.svg)](https://gitter.im/ESP8266Audio/community?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge)
Arduino library for parsing and decoding MOD, WAV, MP3, FLAC, MIDI, AAC, and RTTL files and playing them on an I2S DAC or even using a software-simulated delta-sigma DAC with dynamic 32x-128x oversampling. Arduino library for parsing and decoding MOD, WAV, MP3, FLAC, MIDI, AAC, and RTTL files and playing them on an I2S DAC or even using a software-simulated delta-sigma DAC with dynamic 32x-128x oversampling.
ESP8266 is fully supported and most mature, but ESP32 is also mostly there with built-in DAC as well as external ones. ESP8266 is fully supported and most mature, but ESP32 is also mostly there with built-in DAC as well as external ones.
For real-time, autonomous speech synthesis, check out [ESP8266SAM](https://github.com/earlephilhower/ESP8266SAM), a library which uses this one and a port of an ancient format-based synthesis program to allow your ESP8266 to talk with low memory and no network required. For real-time, autonomous speech synthesis, check out [ESP8266SAM](https://github.com/earlephilhower/ESP8266SAM), a library which uses this one and a port of an ancient formant-based synthesis program to allow your ESP8266 to talk with low memory and no network required.
## Disclaimer ## Disclaimer
All this code is released under the GPL, and all of it is to be used at your own risk. If you find any bugs, please let me know via the GitHub issue tracker or drop me an email. The MOD and MP3 routines were taken from StellaPlayer and libMAD respectively. The software I2S delta-sigma 32x oversampling DAC was my own creation, and sounds quite good if I do say so myself. All this code is released under the GPL, and all of it is to be used at your own risk. If you find any bugs, please let me know via the GitHub issue tracker or drop me an email.
The AAC decode code is from the Helix project and licensed under RealNetwork's RSPL license. For commercial use you're still going to need the usual AAC licensing from [Via Licensing](http://www.via-corp.com/us/en/licensing/aac/overview.html). * The MOD and MP3 routines were taken from StellarPlayer and libMAD respectively.
* The software I2S delta-sigma 32x oversampling DAC was my own creation, and sounds quite good if I do say so myself.
On the ESP32, AAC-SBR is supported (many webradio stations use this to reduce bandwidth even further). The ESP8266, however, does not support it due to a lack of onboard RAM. * The AAC decode code is from the Helix project and licensed under RealNetwork's RSPL license. For commercial use you're still going to need the usual AAC licensing from [Via Licensing](http://www.via-corp.com/us/en/licensing/aac/overview.html). On the ESP32, AAC-SBR is supported (many webradio stations use this to reduce bandwidth even further). The ESP8266, however, does not support it due to a lack of onboard RAM.
* MIDI decoding comes from a highly ported [MIDITONES](https://github.com/LenShustek/miditones) combined with a massively memory-optimized [TinySoundFont](https://github.com/schellingb/TinySoundFont), see the respective source files for more information.
MIDI decoding comes from a highly ported [MIDITONES](https://github.com/LenShustek/miditones) combined with a massively memory-optimized [TinySoundFont](https://github.com/schellingb/TinySoundFont), see the respective source files for more information. * Opus, OGG, and OpusFile are from [Xiph.org](https://xiph.org) with the Xiph license and patent described in src/{opusfile,libggg,libopus}/COPYING.. **NOTE** Opus decoding currently only works on the ESP32 due to the large memory requirements of opusfile. PRs to rewrite it to be less memory intensive would be much appreciated.
Opus, OGG, and OpusFile are from [Xiph.org](https://xiph.org) with the Xiph license and patent described in src/{opusfile,libggg,libopus}/COPYING.. **NOTE** Opus decoding currently only works on the ESP32 due to the large memory requirements of opusfile. PRs to rewrite it to be less memory intensive would be much appreciated.
## Neat Things People Have Done With ESP8266Audio ## Neat Things People Have Done With ESP8266Audio
If you have a neat use for this library, [I'd love to hear about it](mailto:earlephilhower@yahoo.com)! If you have a neat use for this library, [I'd love to hear about it](mailto:earlephilhower@yahoo.com)!
My personal use of the ESP8266Audio library is only to drive a 3D-printed, network-time-setting alarm clock for my kids which can play an MP3 instead of a bell to wake them up, called [Psychoclock](https://github.com/earlephilhower/psychoclock). * My personal use of the ESP8266Audio library is only to drive a 3D-printed, network-time-setting alarm clock for my kids which can play an MP3 instead of a bell to wake them up, called [Psychoclock](https://github.com/earlephilhower/psychoclock).
* Harald Sattler has built a neat German [word clock with MP3 alarm](http://www.harald-sattler.de/html/mini-wecker.htm). Detailed discussion on the process and models are included.
Harald Sattler has built a neat German [word clock with MP3 alarm](http://www.harald-sattler.de/html/mini-wecker.htm). Detailed discussion on the process and models are included. * Erich Heinemann has developed a Stomper (instrument for playing samples in real-time during a live stage performance) that you can find more info about [here](https://github.com/ErichHeinemann/hman-stomper).
* Dagnall53 has integrated this into a really neat MQTT based model train controller to add sounds to his set. More info is available [here](https://github.com/dagnall53/ESPMQTTRocnetSound), including STL files for 3D printed components!
Erich Heinemann has developed a Stomper (instrument for playing samples in real-time during a live stage performance) that you can find more info about [here](https://github.com/ErichHeinemann/hman-stomper). * JohannesMTC has built a similar project especially for model trains: https://github.com/JohannesMTC/ESP32_MAS
* A neat MQTT-driven ESP8266 light-and-sound device (alarm? toy? who can say!) was built by @CosmicMac, available at https://github.com/CosmicMac/ESParkle
Dagnall53 has integrated this into a really neat MQTT based model train controller to add sounds to his set. More info is available [here](https://github.com/dagnall53/ESPMQTTRocnetSound), including STL files for 3D printed components! * A very interesting "linear clock" with a stepper motor, NTP time keeping, and configurable recorded chimes with schematics, 3D printer plans, and source code, is now available https://janderogee.com/projects/linear_clock/linear_clock.htm
* Source and instructions for a gorgeous wooden MP3-playing clock, FM radio and a walkie-talkie using the ESP8266 and AVR microcontrollers is available https://github.com/zduka/mp3-player
JohannesMTC has built a similar project especially for model trains: https://github.com/JohannesMTC/ESP32_MAS
A neat MQTT-driven ESP8266 light-and-sound device (alarm? toy? who can say!) was built by @CosmicMac, available at https://github.com/CosmicMac/ESParkle
A very interesting "linear clock" with a stepper motor, NTP time keeping, and configurable recorded chimes with schematics, 3D printer plans, and source code, is now available https://janderogee.com/projects/linear_clock/linear_clock.htm
Source and instructions for a gorgeous wooden MP3-playing clock, FM radio and a walkie-talkie using the ESP8266 and AVR microcontrollers is available https://github.com/zduka/mp3-player
## Prerequisites ## Prerequisites
First, make sure you are running the 2.6.3/later or GIT head version of the Arduino libraries for ESP8266, or the latest ESP32 SDK from Espressif. First, make sure you are running the 2.6.3/later or GIT head version of the Arduino libraries for ESP8266, or the latest ESP32 SDK from Espressif.
@@ -265,10 +256,11 @@ I've been told the Wemos SD card shield uses GPIO15 as the SD chip select. This
There's no ESP8266-specific code in the AudioGenerator routines, so porting to other controllers should be relatively easy assuming they have the same endianness as the Xtensa core used. Drop me a line if you're doing this, I may be able to help point you in the right direction. There's no ESP8266-specific code in the AudioGenerator routines, so porting to other controllers should be relatively easy assuming they have the same endianness as the Xtensa core used. Drop me a line if you're doing this, I may be able to help point you in the right direction.
## Thanks ## Thanks
Thanks to the authors of StellaPlayer and libMAD for releasing their code freely, and to the maintainers and contributors to the ESP8266 Arduino port. Thanks to the authors of StellarPlayer and libMAD for releasing their code freely, and to the maintainers and contributors to the ESP8266 Arduino port.
Also, big thanks to @tueddy for getting the initial ESP32 porting into the tree! Also, big thanks to @tueddy for getting the initial ESP32 porting into the tree!
-Earle F. Philhower, III -Earle F. Philhower, III
earlephilhower@yahoo.com earlephilhower@yahoo.com
@@ -1,8 +1,8 @@
#include <Arduino.h> #include <Arduino.h>
// Do not build on GCC8, GCC8 has a compiler bug // Do not build on Espressif GCC8+, compiler bug
#if defined(ARDUINO_ARCH_RP2040) || (__GNUC__ == 8) #if defined(ARDUINO_ARCH_RP2040) || (defined(ESP32) && (__GNUC__ >= 8) && (__XTENSA__))
void setup() {} void setup() {}
void loop() {} void loop() {}
#else #else
File diff suppressed because it is too large. Load diff
@@ -0,0 +1,47 @@
#include <Arduino.h>
#include "AudioFileSourcePROGMEM.h"
#include "AudioGeneratorMOD.h"
#include "AudioOutputPWM.h"
#if !defined(ARDUINO_ARCH_RP2040)
void setup() {
Serial.begin(115200);
Serial.printf("Only for the RP2040/Raspberry Pi Pico\n");
}
void loop() {
}
#else
// 5_steps.mod sample from the mod archive: https://modarchive.org/
#include "5steps.h"
AudioGeneratorMOD *mod;
AudioFileSourcePROGMEM *file;
AudioOutputPWM *out;
void setup()
{
Serial.begin(115200);
delay(1000);
audioLogger = &Serial;
file = new AudioFileSourcePROGMEM(steps_mod, sizeof(steps_mod));
out = new AudioOutputPWM();
mod = new AudioGeneratorMOD();
mod->SetBufferSize(3*1024);
mod->SetSampleRate(44100);
mod->SetStereoSeparation(32);
mod->begin(file, out);
}
void loop()
{
if (mod->isRunning()) {
if (!mod->loop()) mod->stop();
} else {
Serial.printf("MOD done\n");
delay(1000);
}
}
#endif
+1
View File
@@ -23,6 +23,7 @@ AudioOutput KEYWORD1
AudioOutputI2S KEYWORD1 AudioOutputI2S KEYWORD1
AudioOutputI2SNoDAC KEYWORD1 AudioOutputI2SNoDAC KEYWORD1
AudioOutputI2SClass KEYWORD1 AudioOutputI2SClass KEYWORD1
AudioOutputPWM KEYWORD1
AudioOutputNull KEYWORD1 AudioOutputNull KEYWORD1
AudioOutputBuffer KEYWORD1 AudioOutputBuffer KEYWORD1
AudioOutputSerialWAV KEYWORD1 AudioOutputSerialWAV KEYWORD1
+1 -1
View File
@@ -14,7 +14,7 @@
"type": "git", "type": "git",
"url": "https://github.com/earlephilhower/ESP8266Audio" "url": "https://github.com/earlephilhower/ESP8266Audio"
}, },
"version": "1.9.7", "version": "1.9.9",
"homepage": "https://github.com/earlephilhower/ESP8266Audio", "homepage": "https://github.com/earlephilhower/ESP8266Audio",
"frameworks": "Arduino", "frameworks": "Arduino",
"examples": [ "examples": [
+1 -1
View File
@@ -1,5 +1,5 @@
name=ESP8266Audio name=ESP8266Audio
version=1.9.7 version=1.9.9
author=Earle F. Philhower, III author=Earle F. Philhower, III
maintainer=Earle F. Philhower, III maintainer=Earle F. Philhower, III
sentence=Audio file and I2S sound playing routines for ESP8266, ESP32, and Raspberry Pi Pico RP2040 sentence=Audio file and I2S sound playing routines for ESP8266, ESP32, and Raspberry Pi Pico RP2040
+4
View File
@@ -102,7 +102,11 @@ retry:
} }
if ((size > 0) && (pos >= size)) return 0; if ((size > 0) && (pos >= size)) return 0;
#if defined(ESP_ARDUINO_VERSION_MAJOR) && ESP_ARDUINO_VERSION_MAJOR >= 3
NetworkClient *stream = http.getStreamPtr();
#else
WiFiClient *stream = http.getStreamPtr(); WiFiClient *stream = http.getStreamPtr();
#endif
// Can't read past EOF... // Can't read past EOF...
if ( (size > 0) && (len > (uint32_t)(pos - size)) ) len = pos - size; if ( (size > 0) && (len > (uint32_t)(pos - size)) ) len = pos - size;
+4
View File
@@ -53,7 +53,11 @@ class AudioFileSourceHTTPStream : public AudioFileSource
private: private:
virtual uint32_t readInternal(void *data, uint32_t len, bool nonBlock); virtual uint32_t readInternal(void *data, uint32_t len, bool nonBlock);
#if defined(ESP_ARDUINO_VERSION_MAJOR) && ESP_ARDUINO_VERSION_MAJOR >= 3
NetworkClient client;
#else
WiFiClient client; WiFiClient client;
#endif
HTTPClient http; HTTPClient http;
int pos; int pos;
int size; int size;
+4
View File
@@ -115,7 +115,11 @@ retry:
} }
if ((size > 0) && (pos >= size)) return 0; if ((size > 0) && (pos >= size)) return 0;
#if defined(ESP_ARDUINO_VERSION_MAJOR) && ESP_ARDUINO_VERSION_MAJOR >= 3
NetworkClient *stream = http.getStreamPtr();
#else
WiFiClient *stream = http.getStreamPtr(); WiFiClient *stream = http.getStreamPtr();
#endif
// Can't read past EOF... // Can't read past EOF...
if ( (size > 0) && (len > (uint32_t)(pos - size)) ) len = pos - size; if ( (size > 0) && (len > (uint32_t)(pos - size)) ) len = pos - size;
+1 -1
View File
@@ -196,7 +196,7 @@ char AudioGeneratorFLAC::error_cb_str[64];
void AudioGeneratorFLAC::error_cb(const FLAC__StreamDecoder *decoder, FLAC__StreamDecoderErrorStatus status) void AudioGeneratorFLAC::error_cb(const FLAC__StreamDecoder *decoder, FLAC__StreamDecoderErrorStatus status)
{ {
(void) decoder; (void) decoder;
strncpy_P(error_cb_str, FLAC__StreamDecoderErrorStatusString[status], 64); strncpy_P(error_cb_str, FLAC__StreamDecoderErrorStatusString[status], sizeof(AudioGeneratorFLAC::error_cb_str) - 1);
cb.st((int)status, error_cb_str); cb.st((int)status, error_cb_str);
} }
+2 -2
View File
@@ -58,8 +58,8 @@
#include "AudioGeneratorMIDI.h" #include "AudioGeneratorMIDI.h"
#if __GNUC__ == 8 #if defined(ESP32) && (__GNUC__ >= 8) && (__XTENSA__)
// Do not build, GCC8 has a compiler bug // Do not build, Espressif's GCC8+ has a compiler bug
#else // __GNUC__ == 8 #else // __GNUC__ == 8
#pragma GCC optimize ("O3") #pragma GCC optimize ("O3")
+2 -2
View File
@@ -21,8 +21,8 @@
#ifndef _AUDIOGENERATORMIDI_H #ifndef _AUDIOGENERATORMIDI_H
#define _AUDIOGENERATORMIDI_H #define _AUDIOGENERATORMIDI_H
#if __GNUC__ == 8 #if defined(ESP32) && (__GNUC__ >= 8) && (__XTENSA__)
// Do not build, GCC8 has a compiler bug // Do not build, Espressif's GCC8+ has a compiler bug
#else // __GNUC__ == 8 #else // __GNUC__ == 8
#include "AudioGenerator.h" #include "AudioGenerator.h"
+15 -7
View File
@@ -1,7 +1,7 @@
/* /*
AudioGeneratorMP3 AudioGeneratorMP3
Wrap libmad MP3 library to play audio Wrap libmad MP3 library to play audio
Copyright (C) 2017 Earle F. Philhower, III Copyright (C) 2017 Earle F. Philhower, III
This program is free software: you can redistribute it and/or modify This program is free software: you can redistribute it and/or modify
@@ -62,7 +62,7 @@ AudioGeneratorMP3::~AudioGeneratorMP3()
free(synth); free(synth);
free(frame); free(frame);
free(stream); free(stream);
} }
} }
@@ -182,7 +182,7 @@ bool AudioGeneratorMP3::GetOneSample(int16_t sample[2])
output->SetChannels(synth->pcm.channels); output->SetChannels(synth->pcm.channels);
lastChannels = synth->pcm.channels; lastChannels = synth->pcm.channels;
} }
// If we're here, we have one decoded frame and sent 0 or more samples out // If we're here, we have one decoded frame and sent 0 or more samples out
if (samplePtr < synth->pcm.length) { if (samplePtr < synth->pcm.length) {
sample[AudioOutput::LEFTCHANNEL ] = synth->pcm.samples[0][samplePtr]; sample[AudioOutput::LEFTCHANNEL ] = synth->pcm.samples[0][samplePtr];
@@ -190,7 +190,7 @@ bool AudioGeneratorMP3::GetOneSample(int16_t sample[2])
samplePtr++; samplePtr++;
} else { } else {
samplePtr = 0; samplePtr = 0;
switch ( mad_synth_frame_onens(synth, frame, nsCount++) ) { switch ( mad_synth_frame_onens(synth, frame, nsCount++) ) {
case MAD_FLOW_STOP: case MAD_FLOW_STOP:
case MAD_FLOW_BREAK: audioLogger->printf_P(PSTR("msf1ns failed\n")); case MAD_FLOW_BREAK: audioLogger->printf_P(PSTR("msf1ns failed\n"));
@@ -248,6 +248,10 @@ retry:
running = false; running = false;
goto done; goto done;
} }
if (lastChannels == 1)
{
lastSample[1] = lastSample[0];
}
} while (running && output->ConsumeSample(lastSample)); } while (running && output->ConsumeSample(lastSample));
done: done:
@@ -298,6 +302,7 @@ bool AudioGeneratorMP3::begin(AudioFileSource *source, AudioOutput *output)
synth = reinterpret_cast<struct mad_synth *>(preallocateSynthSpace); synth = reinterpret_cast<struct mad_synth *>(preallocateSynthSpace);
} }
else { else {
output->stop();
audioLogger->printf_P("OOM error in MP3: Want %d/%d/%d/%d bytes, have %d/%d/%d/%d bytes preallocated.\n", audioLogger->printf_P("OOM error in MP3: Want %d/%d/%d/%d bytes, have %d/%d/%d/%d bytes preallocated.\n",
preAllocBuffSize(), preAllocStreamSize(), preAllocFrameSize(), preAllocSynthSize(), preAllocBuffSize(), preAllocStreamSize(), preAllocFrameSize(), preAllocSynthSize(),
preallocateSize, preallocateStreamSize, preallocateFrameSize, preallocateSynthSize); preallocateSize, preallocateStreamSize, preallocateFrameSize, preallocateSynthSize);
@@ -315,6 +320,7 @@ bool AudioGeneratorMP3::begin(AudioFileSource *source, AudioOutput *output)
p += preAllocSynthSize(); p += preAllocSynthSize();
int neededBytes = p - reinterpret_cast<uint8_t *>(preallocateSpace); int neededBytes = p - reinterpret_cast<uint8_t *>(preallocateSpace);
if (neededBytes > preallocateSize) { if (neededBytes > preallocateSize) {
output->stop();
audioLogger->printf_P("OOM error in MP3: Want %d bytes, have %d bytes preallocated.\n", neededBytes, preallocateSize); audioLogger->printf_P("OOM error in MP3: Want %d bytes, have %d bytes preallocated.\n", neededBytes, preallocateSize);
return false; return false;
} }
@@ -332,17 +338,20 @@ bool AudioGeneratorMP3::begin(AudioFileSource *source, AudioOutput *output)
stream = NULL; stream = NULL;
frame = NULL; frame = NULL;
synth = NULL; synth = NULL;
output->stop();
audioLogger->printf_P("OOM error in MP3\n");
return false; return false;
} }
} }
mad_stream_init(stream); mad_stream_init(stream);
mad_frame_init(frame); mad_frame_init(frame);
mad_synth_init(synth); mad_synth_init(synth);
synth->pcm.length = 0; synth->pcm.length = 0;
mad_stream_options(stream, 0); // TODO - add options support mad_stream_options(stream, 0); // TODO - add options support
madInitted = true; madInitted = true;
running = true; running = true;
return true; return true;
} }
@@ -409,4 +418,3 @@ extern "C" {
} }
#endif #endif
} }
+3 -3
View File
@@ -236,13 +236,13 @@ bool AudioGeneratorRTTTL::GetNextNote()
ptr++; ptr++;
note++; note++;
} }
if (!ReadInt(&scale)) {
scale = defaultOctave;
}
if ((ptr < len) && (buff[ptr] == '.')) { if ((ptr < len) && (buff[ptr] == '.')) {
ptr++; ptr++;
dur += dur / 2; dur += dur / 2;
} }
if (!ReadInt(&scale)) {
scale = defaultOctave;
}
// Eat any trailing whitespace and comma // Eat any trailing whitespace and comma
SkipWhitespace(); SkipWhitespace();
if ((ptr < len) && (buff[ptr]==',')) { if ((ptr < len) && (buff[ptr]==',')) {
+2 -2
View File
@@ -127,7 +127,7 @@ bool AudioGeneratorWAV::ReadWAVInfo()
return false; return false;
}; };
if (u32 != 0x46464952) { if (u32 != 0x46464952) {
Serial.printf_P(PSTR("AudioGeneratorWAV::ReadWAVInfo: cannot read WAV, invalid RIFF header, got: %08X \n"), (uint32_t) u32); Serial.printf_P(PSTR("AudioGeneratorWAV::ReadWAVInfo: cannot read WAV, invalid RIFF header\n"));
return false; return false;
} }
@@ -143,7 +143,7 @@ bool AudioGeneratorWAV::ReadWAVInfo()
return false; return false;
}; };
if (u32 != 0x45564157) { if (u32 != 0x45564157) {
Serial.printf_P(PSTR("AudioGeneratorWAV::ReadWAVInfo: cannot read WAV, invalid WAVE header, got: %08X \n"), (uint32_t) u32); Serial.printf_P(PSTR("AudioGeneratorWAV::ReadWAVInfo: cannot read WAV, invalid WAVE header\n"));
return false; return false;
} }
+60 -18
View File
@@ -49,6 +49,7 @@ AudioOutputI2S::AudioOutputI2S(int port, int output_mode, int dma_buf_count, int
bclkPin = 26; bclkPin = 26;
wclkPin = 25; wclkPin = 25;
doutPin = 22; doutPin = 22;
mclkPin = 0;
SetGain(1.0); SetGain(1.0);
} }
@@ -61,24 +62,16 @@ AudioOutputI2S::AudioOutputI2S(long sampleRate, pin_size_t sck, pin_size_t data)
hertz = sampleRate; hertz = sampleRate;
bclkPin = sck; bclkPin = sck;
doutPin = data; doutPin = data;
mclkPin = 0;
use_mclk = false;
swap_clocks = false;
SetGain(1.0); SetGain(1.0);
} }
#endif #endif
AudioOutputI2S::~AudioOutputI2S() AudioOutputI2S::~AudioOutputI2S()
{ {
#ifdef ESP32 stop();
if (i2sOn) {
audioLogger->printf("UNINSTALL I2S\n");
i2s_driver_uninstall((i2s_port_t)portNo); //stop & destroy i2s driver
}
#elif defined(ESP8266)
if (i2sOn)
i2s_end();
#elif defined(ARDUINO_ARCH_RP2040)
stop();
#endif
i2sOn = false;
} }
bool AudioOutputI2S::SetPinout() bool AudioOutputI2S::SetPinout()
@@ -88,7 +81,9 @@ bool AudioOutputI2S::SetPinout()
return false; // Not allowed return false; // Not allowed
i2s_pin_config_t pins = { i2s_pin_config_t pins = {
.mck_io_num = 0, // Unused #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 4, 0)
.mck_io_num = mclkPin,
#endif
.bck_io_num = bclkPin, .bck_io_num = bclkPin,
.ws_io_num = wclkPin, .ws_io_num = wclkPin,
.data_out_num = doutPin, .data_out_num = doutPin,
@@ -99,6 +94,8 @@ bool AudioOutputI2S::SetPinout()
(void)bclkPin; (void)bclkPin;
(void)wclkPin; (void)wclkPin;
(void)doutPin; (void)doutPin;
(void)mclkPin;
(void)use_mclk;
return false; return false;
#endif #endif
} }
@@ -113,6 +110,22 @@ bool AudioOutputI2S::SetPinout(int bclk, int wclk, int dout)
return true; return true;
} }
bool AudioOutputI2S::SetPinout(int bclk, int wclk, int dout, int mclk)
{
bclkPin = bclk;
wclkPin = wclk;
doutPin = dout;
#ifdef ESP32
mclkPin = mclk;
if (i2sOn)
return SetPinout();
#else
(void)mclk;
#endif
return true;
}
bool AudioOutputI2S::SetRate(int hz) bool AudioOutputI2S::SetRate(int hz)
{ {
// TODO - have a list of allowable rates from constructor, check them // TODO - have a list of allowable rates from constructor, check them
@@ -156,6 +169,26 @@ bool AudioOutputI2S::SetLsbJustified(bool lsbJustified)
return true; return true;
} }
bool AudioOutputI2S::SwapClocks(bool swap_clocks)
{
if (i2sOn) {
return false; // Not allowed
}
this->swap_clocks = swap_clocks;
return true;
}
bool AudioOutputI2S::SetMclk(bool enabled){
(void)enabled;
#ifdef ESP32
if (output_mode == INTERNAL_DAC || output_mode == INTERNAL_PDM)
return false; // Not allowed
use_mclk = enabled;
#endif
return true;
}
bool AudioOutputI2S::begin(bool txDAC) bool AudioOutputI2S::begin(bool txDAC)
{ {
#ifdef ESP32 #ifdef ESP32
@@ -165,9 +198,9 @@ bool AudioOutputI2S::begin(bool txDAC)
{ {
// don't use audio pll on buggy rev0 chips // don't use audio pll on buggy rev0 chips
use_apll = APLL_DISABLE; use_apll = APLL_DISABLE;
esp_chip_info_t out_info; //esp_chip_info_t out_info;
esp_chip_info(&out_info); //esp_chip_info(&out_info);
if (out_info.revision > 0) //if (out_info.revision > 0)
{ {
use_apll = APLL_ENABLE; use_apll = APLL_ENABLE;
} }
@@ -228,9 +261,11 @@ bool AudioOutputI2S::begin(bool txDAC)
.dma_buf_len = 128, .dma_buf_len = 128,
.use_apll = use_apll, // Use audio PLL .use_apll = use_apll, // Use audio PLL
.tx_desc_auto_clear = true, // Silence on underflow .tx_desc_auto_clear = true, // Silence on underflow
.fixed_mclk = 0, // Unused .fixed_mclk = use_mclk, // Unused
.mclk_multiple = I2S_MCLK_MULTIPLE_DEFAULT, // Unused #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 4, 0)
.mclk_multiple = I2S_MCLK_MULTIPLE_256, // Unused
.bits_per_chan = I2S_BITS_PER_CHAN_DEFAULT // Use bits per sample .bits_per_chan = I2S_BITS_PER_CHAN_DEFAULT // Use bits per sample
#endif
}; };
audioLogger->printf("+%d %p\n", portNo, &i2s_config_dac); audioLogger->printf("+%d %p\n", portNo, &i2s_config_dac);
if (i2s_driver_install((i2s_port_t)portNo, &i2s_config_dac, 0, NULL) != ESP_OK) if (i2s_driver_install((i2s_port_t)portNo, &i2s_config_dac, 0, NULL) != ESP_OK)
@@ -277,6 +312,9 @@ bool AudioOutputI2S::begin(bool txDAC)
if (!i2sOn) { if (!i2sOn) {
i2s.setBCLK(bclkPin); i2s.setBCLK(bclkPin);
i2s.setDATA(doutPin); i2s.setDATA(doutPin);
if (swap_clocks) {
i2s.swapClocks();
}
i2s.begin(hertz); i2s.begin(hertz);
} }
#endif #endif
@@ -355,6 +393,10 @@ bool AudioOutputI2S::stop()
#ifdef ESP32 #ifdef ESP32
i2s_zero_dma_buffer((i2s_port_t)portNo); i2s_zero_dma_buffer((i2s_port_t)portNo);
audioLogger->printf("UNINSTALL I2S\n");
i2s_driver_uninstall((i2s_port_t)portNo); //stop & destroy i2s driver
#elif defined(ESP8266)
i2s_end();
#elif defined(ARDUINO_ARCH_RP2040) #elif defined(ARDUINO_ARCH_RP2040)
i2s.end(); i2s.end();
#endif #endif
+6
View File
@@ -38,6 +38,7 @@ class AudioOutputI2S : public AudioOutput
AudioOutputI2S(long sampleRate = 44100, pin_size_t sck = 26, pin_size_t data = 28); AudioOutputI2S(long sampleRate = 44100, pin_size_t sck = 26, pin_size_t data = 28);
#endif #endif
bool SetPinout(int bclkPin, int wclkPin, int doutPin); bool SetPinout(int bclkPin, int wclkPin, int doutPin);
bool SetPinout(int bclkPin, int wclkPin, int doutPin, int mclkPin);
virtual ~AudioOutputI2S() override; virtual ~AudioOutputI2S() override;
virtual bool SetRate(int hz) override; virtual bool SetRate(int hz) override;
virtual bool SetBitsPerSample(int bits) override; virtual bool SetBitsPerSample(int bits) override;
@@ -50,6 +51,8 @@ class AudioOutputI2S : public AudioOutput
bool begin(bool txDAC); bool begin(bool txDAC);
bool SetOutputModeMono(bool mono); // Force mono output no matter the input bool SetOutputModeMono(bool mono); // Force mono output no matter the input
bool SetLsbJustified(bool lsbJustified); // Allow supporting non-I2S chips, e.g. PT8211 bool SetLsbJustified(bool lsbJustified); // Allow supporting non-I2S chips, e.g. PT8211
bool SetMclk(bool enabled); // Enable MCLK output (if supported)
bool SwapClocks(bool swap_clocks); // Swap BCLK and WCLK
protected: protected:
bool SetPinout(); bool SetPinout();
@@ -61,6 +64,8 @@ class AudioOutputI2S : public AudioOutput
bool i2sOn; bool i2sOn;
int dma_buf_count; int dma_buf_count;
int use_apll; int use_apll;
bool use_mclk;
bool swap_clocks;
// We can restore the old values and free up these pins when in NoDAC mode // We can restore the old values and free up these pins when in NoDAC mode
uint32_t orig_bck; uint32_t orig_bck;
uint32_t orig_ws; uint32_t orig_ws;
@@ -68,6 +73,7 @@ class AudioOutputI2S : public AudioOutput
uint8_t bclkPin; uint8_t bclkPin;
uint8_t wclkPin; uint8_t wclkPin;
uint8_t doutPin; uint8_t doutPin;
uint8_t mclkPin;
#if defined(ARDUINO_ARCH_RP2040) #if defined(ARDUINO_ARCH_RP2040)
I2S i2s; I2S i2s;
+1 -1
View File
@@ -43,7 +43,7 @@ class AudioOutputI2SNoDAC : public AudioOutputI2S
protected: protected:
virtual int AdjustI2SRate(int hz) override { return hz * oversample/32; } virtual int AdjustI2SRate(int hz) override { return hz * oversample/32; }
uint8_t oversample; int oversample;
void DeltaSigma(int16_t sample[2], uint32_t dsBuff[4]); void DeltaSigma(int16_t sample[2], uint32_t dsBuff[4]);
typedef int32_t fixed24p8_t; typedef int32_t fixed24p8_t;
enum {fixedPosValue=0x007fff00}; /* 24.8 of max-signed-int */ enum {fixedPosValue=0x007fff00}; /* 24.8 of max-signed-int */
+114
View File
@@ -0,0 +1,114 @@
/*
AudioOutputPWM
Base class for the RP2040 PWM audio
Copyright (C) 2023 Earle F. Philhower, III
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#if defined(ARDUINO_ARCH_RP2040)
#include <Arduino.h>
#include "AudioOutputPWM.h"
AudioOutputPWM::AudioOutputPWM(long sampleRate, pin_size_t data) {
pwmOn = false;
mono = false;
bps = 16;
channels = 2;
hertz = sampleRate;
doutPin = data;
SetGain(1.0);
pwm.setStereo(true);
}
AudioOutputPWM::~AudioOutputPWM() {
stop();
}
bool AudioOutputPWM::SetRate(int hz) {
this->hertz = hz;
if (pwmOn) {
pwm.setFrequency(hz);
}
return true;
}
bool AudioOutputPWM::SetBitsPerSample(int bits) {
if ( (bits != 16) && (bits != 8) ) return false;
this->bps = bits;
return true;
}
bool AudioOutputPWM::SetChannels(int channels) {
if ( (channels < 1) || (channels > 2) ) return false;
this->channels = channels;
return true;
}
bool AudioOutputPWM::SetOutputModeMono(bool mono) {
this->mono = mono;
return true;
}
bool AudioOutputPWM::begin() {
if (!pwmOn) {
pwm.setPin(doutPin);
pwm.begin(hertz);
}
pwmOn = true;
SetRate(hertz); // Default
return true;
}
bool AudioOutputPWM::ConsumeSample(int16_t sample[2]) {
if (!pwmOn)
return false;
int16_t ms[2];
ms[0] = sample[0];
ms[1] = sample[1];
MakeSampleStereo16( ms );
if (this->mono) {
// Average the two samples and overwrite
int32_t ttl = ms[LEFTCHANNEL] + ms[RIGHTCHANNEL];
ms[LEFTCHANNEL] = ms[RIGHTCHANNEL] = (ttl>>1) & 0xffff;
}
if (pwm.available()) {
pwm.write((int16_t) ms[0]);
pwm.write((int16_t) ms[1]);
return true;
} else {
return false;
}
}
void AudioOutputPWM::flush() {
pwm.flush();
}
bool AudioOutputPWM::stop() {
if (!pwmOn)
return false;
pwm.end();
pwmOn = false;
return true;
}
#endif
+57
View File
@@ -0,0 +1,57 @@
/*
AudioOutputPWM
Base class for the RP2040 PWM audio output
Copyright (C) 2023 Earle F. Philhower, III
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "AudioOutput.h"
#if defined(ARDUINO_ARCH_RP2040)
#include <Arduino.h>
#include <PWMAudio.h>
class AudioOutputPWM : public AudioOutput
{
public:
AudioOutputPWM(long sampleRate = 44100, pin_size_t data = 0);
virtual ~AudioOutputPWM() override;
virtual bool SetRate(int hz) override;
virtual bool SetBitsPerSample(int bits) override;
virtual bool SetChannels(int channels) override;
virtual bool begin() override;
virtual bool ConsumeSample(int16_t sample[2]) override;
virtual void flush() override;
virtual bool stop() override;
bool SetOutputModeMono(bool mono); // Force mono output no matter the input
protected:
bool SetPinout();
virtual int AdjustI2SRate(int hz) { return hz; }
uint8_t portNo;
int output_mode;
bool mono;
bool pwmOn;
uint8_t doutPin;
PWMAudio pwm;
};
#endif
+10 -1
View File
@@ -7,7 +7,7 @@
See: https://www.epanorama.net/documents/audio/spdif.html See: https://www.epanorama.net/documents/audio/spdif.html
Original idea and sources: Original idea and sources:
Forum thread dicussing implementation Forum thread discussing implementation
https://forum.pjrc.com/threads/28639-S-pdif https://forum.pjrc.com/threads/28639-S-pdif
Teensy Audio Library Teensy Audio Library
https://github.com/PaulStoffregen/Audio/blob/master/output_spdif2.cpp https://github.com/PaulStoffregen/Audio/blob/master/output_spdif2.cpp
@@ -105,8 +105,13 @@ AudioOutputSPDIF::AudioOutputSPDIF(int dout_pin, int port, int dma_buf_count)
.use_apll = true, // Audio PLL is needed for low clock jitter .use_apll = true, // Audio PLL is needed for low clock jitter
.tx_desc_auto_clear = true, // Silence on underflow .tx_desc_auto_clear = true, // Silence on underflow
.fixed_mclk = 0, // Unused .fixed_mclk = 0, // Unused
#if defined(ESP_ARDUINO_VERSION_MAJOR) && ESP_ARDUINO_VERSION_MAJOR >= 3
.mclk_multiple = I2S_MCLK_MULTIPLE_512, // Unused
.bits_per_chan = I2S_BITS_PER_CHAN_DEFAULT // Use bits per sample
#elif ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 4, 0)
.mclk_multiple = I2S_MCLK_MULTIPLE_DEFAULT, // Unused .mclk_multiple = I2S_MCLK_MULTIPLE_DEFAULT, // Unused
.bits_per_chan = I2S_BITS_PER_CHAN_DEFAULT // Use bits per sample .bits_per_chan = I2S_BITS_PER_CHAN_DEFAULT // Use bits per sample
#endif
}; };
if (i2s_driver_install((i2s_port_t)portNo, &i2s_config_spdif, 0, NULL) != ESP_OK) { if (i2s_driver_install((i2s_port_t)portNo, &i2s_config_spdif, 0, NULL) != ESP_OK) {
audioLogger->println(F("ERROR: Unable to install I2S drivers")); audioLogger->println(F("ERROR: Unable to install I2S drivers"));
@@ -151,7 +156,9 @@ bool AudioOutputSPDIF::SetPinout(int bclk, int wclk, int dout)
{ {
#if defined(ESP32) #if defined(ESP32)
i2s_pin_config_t pins = { i2s_pin_config_t pins = {
#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 4, 0)
.mck_io_num = 0, // unused .mck_io_num = 0, // unused
#endif
.bck_io_num = bclk, .bck_io_num = bclk,
.ws_io_num = wclk, .ws_io_num = wclk,
.data_out_num = dout, .data_out_num = dout,
@@ -179,12 +186,14 @@ bool AudioOutputSPDIF::SetRate(int hz)
int adjustedHz = AdjustI2SRate(hz); int adjustedHz = AdjustI2SRate(hz);
#if defined(ESP32) #if defined(ESP32)
if (i2s_set_sample_rates((i2s_port_t)portNo, adjustedHz) == ESP_OK) { if (i2s_set_sample_rates((i2s_port_t)portNo, adjustedHz) == ESP_OK) {
#if defined(ESP_ARDUINO_VERSION_MAJOR) && (ESP_ARDUINO_VERSION_MAJOR < 3)
if (adjustedHz == 88200) { if (adjustedHz == 88200) {
// Manually fix the APLL rate for 44100. // Manually fix the APLL rate for 44100.
// See: https://github.com/espressif/esp-idf/issues/2634 // See: https://github.com/espressif/esp-idf/issues/2634
// sdm0 = 28, sdm1 = 8, sdm2 = 5, odir = 0 -> 88199.977 // sdm0 = 28, sdm1 = 8, sdm2 = 5, odir = 0 -> 88199.977
rtc_clk_apll_enable(1, 28, 8, 5, 0); rtc_clk_apll_enable(1, 28, 8, 5, 0);
} }
#endif
} else { } else {
audioLogger->println("ERROR changing S/PDIF sample rate"); audioLogger->println("ERROR changing S/PDIF sample rate");
} }
+1 -1
View File
@@ -7,7 +7,7 @@
See: https://www.epanorama.net/documents/audio/spdif.html See: https://www.epanorama.net/documents/audio/spdif.html
Original idea and sources: Original idea and sources:
Forum thread dicussing implementation Forum thread discussing implementation
https://forum.pjrc.com/threads/28639-S-pdif https://forum.pjrc.com/threads/28639-S-pdif
Teensy Audio Library Teensy Audio Library
https://github.com/PaulStoffregen/Audio/blob/master/output_spdif2.cpp https://github.com/PaulStoffregen/Audio/blob/master/output_spdif2.cpp
+1
View File
@@ -41,6 +41,7 @@
#include "AudioOutput.h" #include "AudioOutput.h"
#include "AudioOutputI2S.h" #include "AudioOutputI2S.h"
#include "AudioOutputI2SNoDAC.h" #include "AudioOutputI2SNoDAC.h"
#include "AudioOutputPWM.h"
#include "AudioOutputMixer.h" #include "AudioOutputMixer.h"
#include "AudioOutputNull.h" #include "AudioOutputNull.h"
#include "AudioOutputSerialWAV.h" #include "AudioOutputSerialWAV.h"
+1 -1
View File
@@ -35,7 +35,7 @@
* print an error message if it fails (ie returns a value < 0). * print an error message if it fails (ie returns a value < 0).
* *
* Ideally, a library should not print anything, but this macro is only used * Ideally, a library should not print anything, but this macro is only used
* for things that extremely unlikely to fail, like `chown` to a previoulsy * for things that extremely unlikely to fail, like `chown` to a previously
* saved `uid`. * saved `uid`.
*/ */
+1 -1
View File
@@ -70,7 +70,7 @@ public:
// return. // return.
// pPCM pointer to a buffer to decode into // pPCM pointer to a buffer to decode into
// pulPCMSize size of the PCM buffer. It will contain the // pulPCMSize size of the PCM buffer. It will contain the
// number of PCM bytes prodced upon return. // number of PCM bytes produced upon return.
/////////////////////////////////////////////////////////////////////////// ///////////////////////////////////////////////////////////////////////////
void DecodeFrame_v(unsigned char *pSource, void DecodeFrame_v(unsigned char *pSource,
unsigned long *pulSize, unsigned long *pulSize,
+1 -1
View File
@@ -54,7 +54,7 @@
* (see comment on Dequantize() for more info) * (see comment on Dequantize() for more info)
*/ */
#define DEF_NFRACBITS (DQ_FRACBITS_OUT - 2 - 2 - 15) #define DEF_NFRACBITS (DQ_FRACBITS_OUT - 2 - 2 - 15)
#define CSHIFT 12 /* coefficients have 12 leading sign bits for early-terminating mulitplies */ #define CSHIFT 12 /* coefficients have 12 leading sign bits for early-terminating multiplies */
static __inline short ClipToShort(int x, int fracBits) static __inline short ClipToShort(int x, int fracBits)
{ {
+69 -72
View File
@@ -352,19 +352,18 @@ struct fixedfloat {
root_table[3 + x] = 2^(x/4) root_table[3 + x] = 2^(x/4)
*/ */
static mad_fixed_t const root_table_val[7] PROGMEM = {
MAD_F(0x09837f05) /* 2^(-3/4) == 0.59460355750136 */,
MAD_F(0x0b504f33) /* 2^(-2/4) == 0.70710678118655 */,
MAD_F(0x0d744fcd) /* 2^(-1/4) == 0.84089641525371 */,
MAD_F(0x10000000) /* 2^( 0/4) == 1.00000000000000 */,
MAD_F(0x1306fe0a) /* 2^(+1/4) == 1.18920711500272 */,
MAD_F(0x16a09e66) /* 2^(+2/4) == 1.41421356237310 */,
MAD_F(0x1ae89f99) /* 2^(+3/4) == 1.68179283050743 */
};
static inline mad_fixed_t root_table(int i) static inline mad_fixed_t root_table(int i)
{ {
static mad_fixed_t const root_table_val[7] PROGMEM = { return root_table_val[i];
MAD_F(0x09837f05) /* 2^(-3/4) == 0.59460355750136 */,
MAD_F(0x0b504f33) /* 2^(-2/4) == 0.70710678118655 */,
MAD_F(0x0d744fcd) /* 2^(-1/4) == 0.84089641525371 */,
MAD_F(0x10000000) /* 2^( 0/4) == 1.00000000000000 */,
MAD_F(0x1306fe0a) /* 2^(+1/4) == 1.18920711500272 */,
MAD_F(0x16a09e66) /* 2^(+2/4) == 1.41421356237310 */,
MAD_F(0x1ae89f99) /* 2^(+3/4) == 1.68179283050743 */
};
volatile uint32_t a = *(uint32_t*)&root_table_val[i];
return *(mad_fixed_t*)&a;
} }
/* /*
coefficients for aliasing reduction coefficients for aliasing reduction
@@ -374,28 +373,26 @@ static inline mad_fixed_t root_table(int i)
cs[i] = 1 / sqrt(1 + c[i]^2) cs[i] = 1 / sqrt(1 + c[i]^2)
ca[i] = c[i] / sqrt(1 + c[i]^2) ca[i] = c[i] / sqrt(1 + c[i]^2)
*/ */
static mad_fixed_t const cs_val[8] PROGMEM = {
+MAD_F(0x0db84a81) /* +0.857492926 */, +MAD_F(0x0e1b9d7f) /* +0.881741997 */,
+MAD_F(0x0f31adcf) /* +0.949628649 */, +MAD_F(0x0fbba815) /* +0.983314592 */,
+MAD_F(0x0feda417) /* +0.995517816 */, +MAD_F(0x0ffc8fc8) /* +0.999160558 */,
+MAD_F(0x0fff964c) /* +0.999899195 */, +MAD_F(0x0ffff8d3) /* +0.999993155 */
};
static inline mad_fixed_t cs(int i) static inline mad_fixed_t cs(int i)
{ {
static mad_fixed_t const cs_val[8] PROGMEM = { return cs_val[i];
+MAD_F(0x0db84a81) /* +0.857492926 */, +MAD_F(0x0e1b9d7f) /* +0.881741997 */,
+MAD_F(0x0f31adcf) /* +0.949628649 */, +MAD_F(0x0fbba815) /* +0.983314592 */,
+MAD_F(0x0feda417) /* +0.995517816 */, +MAD_F(0x0ffc8fc8) /* +0.999160558 */,
+MAD_F(0x0fff964c) /* +0.999899195 */, +MAD_F(0x0ffff8d3) /* +0.999993155 */
};
volatile uint32_t a = *(uint32_t*)&cs_val[i];
return *(mad_fixed_t*)&a;
} }
static mad_fixed_t const ca_val[8] PROGMEM = {
-MAD_F(0x083b5fe7) /* -0.514495755 */, -MAD_F(0x078c36d2) /* -0.471731969 */,
-MAD_F(0x05039814) /* -0.313377454 */, -MAD_F(0x02e91dd1) /* -0.181913200 */,
-MAD_F(0x0183603a) /* -0.094574193 */, -MAD_F(0x00a7cb87) /* -0.040965583 */,
-MAD_F(0x003a2847) /* -0.014198569 */, -MAD_F(0x000f27b4) /* -0.003699975 */
};
static inline mad_fixed_t ca(int i) static inline mad_fixed_t ca(int i)
{ {
static mad_fixed_t const ca_val[8] PROGMEM = { return ca_val[i];
-MAD_F(0x083b5fe7) /* -0.514495755 */, -MAD_F(0x078c36d2) /* -0.471731969 */,
-MAD_F(0x05039814) /* -0.313377454 */, -MAD_F(0x02e91dd1) /* -0.181913200 */,
-MAD_F(0x0183603a) /* -0.094574193 */, -MAD_F(0x00a7cb87) /* -0.040965583 */,
-MAD_F(0x003a2847) /* -0.014198569 */, -MAD_F(0x000f27b4) /* -0.003699975 */
};
volatile uint32_t a = *(uint32_t*)&ca_val[i];
return *(mad_fixed_t*)&a;
} }
/* /*
@@ -417,32 +414,31 @@ mad_fixed_t const imdct_s[6][6] PROGMEM = {
window_l[i] = sin((PI / 36) * (i + 1/2)) window_l[i] = sin((PI / 36) * (i + 1/2))
*/ */
static mad_fixed_t const window_l_val[36] PROGMEM = {
MAD_F(0x00b2aa3e) /* 0.043619387 */, MAD_F(0x0216a2a2) /* 0.130526192 */,
MAD_F(0x03768962) /* 0.216439614 */, MAD_F(0x04cfb0e2) /* 0.300705800 */,
MAD_F(0x061f78aa) /* 0.382683432 */, MAD_F(0x07635284) /* 0.461748613 */,
MAD_F(0x0898c779) /* 0.537299608 */, MAD_F(0x09bd7ca0) /* 0.608761429 */,
MAD_F(0x0acf37ad) /* 0.675590208 */, MAD_F(0x0bcbe352) /* 0.737277337 */,
MAD_F(0x0cb19346) /* 0.793353340 */, MAD_F(0x0d7e8807) /* 0.843391446 */,
MAD_F(0x0e313245) /* 0.887010833 */, MAD_F(0x0ec835e8) /* 0.923879533 */,
MAD_F(0x0f426cb5) /* 0.953716951 */, MAD_F(0x0f9ee890) /* 0.976296007 */,
MAD_F(0x0fdcf549) /* 0.991444861 */, MAD_F(0x0ffc19fd) /* 0.999048222 */,
MAD_F(0x0ffc19fd) /* 0.999048222 */, MAD_F(0x0fdcf549) /* 0.991444861 */,
MAD_F(0x0f9ee890) /* 0.976296007 */, MAD_F(0x0f426cb5) /* 0.953716951 */,
MAD_F(0x0ec835e8) /* 0.923879533 */, MAD_F(0x0e313245) /* 0.887010833 */,
MAD_F(0x0d7e8807) /* 0.843391446 */, MAD_F(0x0cb19346) /* 0.793353340 */,
MAD_F(0x0bcbe352) /* 0.737277337 */, MAD_F(0x0acf37ad) /* 0.675590208 */,
MAD_F(0x09bd7ca0) /* 0.608761429 */, MAD_F(0x0898c779) /* 0.537299608 */,
MAD_F(0x07635284) /* 0.461748613 */, MAD_F(0x061f78aa) /* 0.382683432 */,
MAD_F(0x04cfb0e2) /* 0.300705800 */, MAD_F(0x03768962) /* 0.216439614 */,
MAD_F(0x0216a2a2) /* 0.130526192 */, MAD_F(0x00b2aa3e) /* 0.043619387 */,
};
static inline mad_fixed_t window_l(int i) static inline mad_fixed_t window_l(int i)
{ {
static mad_fixed_t const window_l_val[36] PROGMEM = { return window_l_val[i];
MAD_F(0x00b2aa3e) /* 0.043619387 */, MAD_F(0x0216a2a2) /* 0.130526192 */,
MAD_F(0x03768962) /* 0.216439614 */, MAD_F(0x04cfb0e2) /* 0.300705800 */,
MAD_F(0x061f78aa) /* 0.382683432 */, MAD_F(0x07635284) /* 0.461748613 */,
MAD_F(0x0898c779) /* 0.537299608 */, MAD_F(0x09bd7ca0) /* 0.608761429 */,
MAD_F(0x0acf37ad) /* 0.675590208 */, MAD_F(0x0bcbe352) /* 0.737277337 */,
MAD_F(0x0cb19346) /* 0.793353340 */, MAD_F(0x0d7e8807) /* 0.843391446 */,
MAD_F(0x0e313245) /* 0.887010833 */, MAD_F(0x0ec835e8) /* 0.923879533 */,
MAD_F(0x0f426cb5) /* 0.953716951 */, MAD_F(0x0f9ee890) /* 0.976296007 */,
MAD_F(0x0fdcf549) /* 0.991444861 */, MAD_F(0x0ffc19fd) /* 0.999048222 */,
MAD_F(0x0ffc19fd) /* 0.999048222 */, MAD_F(0x0fdcf549) /* 0.991444861 */,
MAD_F(0x0f9ee890) /* 0.976296007 */, MAD_F(0x0f426cb5) /* 0.953716951 */,
MAD_F(0x0ec835e8) /* 0.923879533 */, MAD_F(0x0e313245) /* 0.887010833 */,
MAD_F(0x0d7e8807) /* 0.843391446 */, MAD_F(0x0cb19346) /* 0.793353340 */,
MAD_F(0x0bcbe352) /* 0.737277337 */, MAD_F(0x0acf37ad) /* 0.675590208 */,
MAD_F(0x09bd7ca0) /* 0.608761429 */, MAD_F(0x0898c779) /* 0.537299608 */,
MAD_F(0x07635284) /* 0.461748613 */, MAD_F(0x061f78aa) /* 0.382683432 */,
MAD_F(0x04cfb0e2) /* 0.300705800 */, MAD_F(0x03768962) /* 0.216439614 */,
MAD_F(0x0216a2a2) /* 0.130526192 */, MAD_F(0x00b2aa3e) /* 0.043619387 */,
};
volatile uint32_t a = *(uint32_t*)&window_l_val[i];
return *(mad_fixed_t*)&a;
} }
# endif /* ASO_IMDCT */ # endif /* ASO_IMDCT */
@@ -452,18 +448,17 @@ static inline mad_fixed_t window_l(int i)
window_s[i] = sin((PI / 12) * (i + 1/2)) window_s[i] = sin((PI / 12) * (i + 1/2))
*/ */
static mad_fixed_t const window_s_val[12] PROGMEM = {
MAD_F(0x0216a2a2) /* 0.130526192 */, MAD_F(0x061f78aa) /* 0.382683432 */,
MAD_F(0x09bd7ca0) /* 0.608761429 */, MAD_F(0x0cb19346) /* 0.793353340 */,
MAD_F(0x0ec835e8) /* 0.923879533 */, MAD_F(0x0fdcf549) /* 0.991444861 */,
MAD_F(0x0fdcf549) /* 0.991444861 */, MAD_F(0x0ec835e8) /* 0.923879533 */,
MAD_F(0x0cb19346) /* 0.793353340 */, MAD_F(0x09bd7ca0) /* 0.608761429 */,
MAD_F(0x061f78aa) /* 0.382683432 */, MAD_F(0x0216a2a2) /* 0.130526192 */,
};
static inline mad_fixed_t window_s(int i) static inline mad_fixed_t window_s(int i)
{ {
static mad_fixed_t const window_s_val[12] PROGMEM = { return window_s_val[i];
MAD_F(0x0216a2a2) /* 0.130526192 */, MAD_F(0x061f78aa) /* 0.382683432 */,
MAD_F(0x09bd7ca0) /* 0.608761429 */, MAD_F(0x0cb19346) /* 0.793353340 */,
MAD_F(0x0ec835e8) /* 0.923879533 */, MAD_F(0x0fdcf549) /* 0.991444861 */,
MAD_F(0x0fdcf549) /* 0.991444861 */, MAD_F(0x0ec835e8) /* 0.923879533 */,
MAD_F(0x0cb19346) /* 0.793353340 */, MAD_F(0x09bd7ca0) /* 0.608761429 */,
MAD_F(0x061f78aa) /* 0.382683432 */, MAD_F(0x0216a2a2) /* 0.130526192 */,
};
volatile uint32_t a = *(uint32_t*)&window_s_val[i];
return *(mad_fixed_t*)&a;
} }
/* /*
@@ -473,19 +468,18 @@ static inline mad_fixed_t window_s(int i)
is_ratio[i] = tan(i * (PI / 12)) is_ratio[i] = tan(i * (PI / 12))
is_table[i] = is_ratio[i] / (1 + is_ratio[i]) is_table[i] = is_ratio[i] / (1 + is_ratio[i])
*/ */
static mad_fixed_t const is_table_val[7] PROGMEM = {
MAD_F(0x00000000) /* 0.000000000 */,
MAD_F(0x0361962f) /* 0.211324865 */,
MAD_F(0x05db3d74) /* 0.366025404 */,
MAD_F(0x08000000) /* 0.500000000 */,
MAD_F(0x0a24c28c) /* 0.633974596 */,
MAD_F(0x0c9e69d1) /* 0.788675135 */,
MAD_F(0x10000000) /* 1.000000000 */
};
static inline mad_fixed_t is_table(int i) static inline mad_fixed_t is_table(int i)
{ {
static mad_fixed_t const is_table_val[7] PROGMEM = { return is_table_val[i];
MAD_F(0x00000000) /* 0.000000000 */,
MAD_F(0x0361962f) /* 0.211324865 */,
MAD_F(0x05db3d74) /* 0.366025404 */,
MAD_F(0x08000000) /* 0.500000000 */,
MAD_F(0x0a24c28c) /* 0.633974596 */,
MAD_F(0x0c9e69d1) /* 0.788675135 */,
MAD_F(0x10000000) /* 1.000000000 */
};
volatile uint32_t a = *(uint32_t*)&is_table_val[i];
return *(mad_fixed_t*)&a;
} }
/* /*
@@ -1739,7 +1733,10 @@ void sdctII(mad_fixed_t const x[18], mad_fixed_t X[18])
s = *(volatile mad_fixed_t*)(volatile uint32_t*)&scale[i + 2]; tmp[i + 2] = mad_f_mul(x[i + 2] - x[18 - (i + 2) - 1], s); //scale[i + 2]); s = *(volatile mad_fixed_t*)(volatile uint32_t*)&scale[i + 2]; tmp[i + 2] = mad_f_mul(x[i + 2] - x[18 - (i + 2) - 1], s); //scale[i + 2]);
} }
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wstringop-overflow"
fastsdct(tmp, &X[1]); fastsdct(tmp, &X[1]);
#pragma GCC diagnostic pop
/* output accumulation */ /* output accumulation */
+2 -1
View File
@@ -24,7 +24,7 @@
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/ */
#if 0
//#ifdef HAVE_CONFIG_H //#ifdef HAVE_CONFIG_H
#include "config.h" #include "config.h"
//#endif //#endif
@@ -2781,3 +2781,4 @@ void opus_encoder_destroy(OpusEncoder *st)
{ {
opus_free(st); opus_free(st);
} }
#endif
+2 -1
View File
@@ -24,7 +24,7 @@
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/ */
#if 0
//#ifdef HAVE_CONFIG_H //#ifdef HAVE_CONFIG_H
#include "config.h" #include "config.h"
//#endif //#endif
@@ -1326,3 +1326,4 @@ void opus_multistream_encoder_destroy(OpusMSEncoder *st)
{ {
opus_free(st); opus_free(st);
} }
#endif
+2 -2
View File
@@ -24,7 +24,7 @@
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/ */
#if 0
//#ifdef HAVE_CONFIG_H //#ifdef HAVE_CONFIG_H
#include "config.h" #include "config.h"
//#endif //#endif
@@ -465,4 +465,4 @@ bad_arg:
va_end(ap); va_end(ap);
return OPUS_BAD_ARG; return OPUS_BAD_ARG;
} }
#endif
+3 -1
View File
@@ -62,6 +62,8 @@ static OPUS_INLINE void silk_NLSF2A_find_poly(
} }
} }
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wmaybe-uninitialized"
/* compute whitening filter coefficients from normalized line spectral frequencies */ /* compute whitening filter coefficients from normalized line spectral frequencies */
void silk_NLSF2A( void silk_NLSF2A(
opus_int16 *a_Q12, /* O monic whitening filter coefficients in Q12, [ d ] */ opus_int16 *a_Q12, /* O monic whitening filter coefficients in Q12, [ d ] */
@@ -143,4 +145,4 @@ void silk_NLSF2A(
free(Q); free(Q);
free(a32_QA1); free(a32_QA1);
} }
#pragma GCC diagnostic pop
+2
View File
@@ -24,6 +24,7 @@ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. POSSIBILITY OF SUCH DAMAGE.
***********************************************************************/ ***********************************************************************/
#if 0
//#ifdef HAVE_CONFIG_H //#ifdef HAVE_CONFIG_H
#include "../config.h" #include "../config.h"
@@ -574,3 +575,4 @@ opus_int silk_Encode( /* O Returns error co
return ret; return ret;
} }
#endif
@@ -34,6 +34,7 @@ POSSIBILITY OF SUCH DAMAGE.
#include "../../celt/stack_alloc.h" #include "../../celt/stack_alloc.h"
#include "../tuning_parameters.h" #include "../tuning_parameters.h"
#if 0
/* Low Bitrate Redundancy (LBRR) encoding. Reuse all parameters but encode with lower bitrate */ /* Low Bitrate Redundancy (LBRR) encoding. Reuse all parameters but encode with lower bitrate */
static OPUS_INLINE void silk_LBRR_encode_FIX( static OPUS_INLINE void silk_LBRR_encode_FIX(
silk_encoder_state_FIX *psEnc, /* I/O Pointer to Silk FIX encoder state */ silk_encoder_state_FIX *psEnc, /* I/O Pointer to Silk FIX encoder state */
@@ -446,3 +447,4 @@ static OPUS_INLINE void silk_LBRR_encode_FIX(
silk_memcpy( psEncCtrl->Gains_Q16, TempGains_Q16, psEnc->sCmn.nb_subfr * sizeof( opus_int32 ) ); silk_memcpy( psEncCtrl->Gains_Q16, TempGains_Q16, psEnc->sCmn.nb_subfr * sizeof( opus_int32 ) );
} }
} }
#endif
+14 -1
View File
@@ -42,6 +42,16 @@
*/ */
// ESP32 as of 3.x has a compiler bug in this section, with the G++ generated assembly
// being illegal. There's nothing wrong with the code here, it just looks like an
// Xtensa backend issue. Until that's fixed, no MIDI for you!
///home/earle/Arduino/libraries/ESP8266Audio/src/libtinysoundfont/tsf.h: In function 'void tsf_channel_midi_control(tsf*, int, int, int)':
// /home/earle/Arduino/libraries/ESP8266Audio/src/libtinysoundfont/tsf.h:2101:1: error: insn does not satisfy its constraints:
// 2101 | }
// | ^
#if !defined(ESP32)
#ifndef TSF_INCLUDE_TSF_INL #ifndef TSF_INCLUDE_TSF_INL
#define TSF_INCLUDE_TSF_INL #define TSF_INCLUDE_TSF_INL
@@ -1440,6 +1450,7 @@ static void tsf_voice_render_fast(tsf* f, struct tsf_voice* v, short* outputBuff
//double tmpSampleEndDbl = (double)v->sampleEnd, tmpLoopEndDbl = (double)tmpLoopEnd + 1.0; //double tmpSampleEndDbl = (double)v->sampleEnd, tmpLoopEndDbl = (double)tmpLoopEnd + 1.0;
//double tmpSourceSamplePosition = v->sourceSamplePosition; //double tmpSourceSamplePosition = v->sourceSamplePosition;
fixed32p32 tmpSampleEndF32P32 = ((fixed32p32)(region->end)) << 32; fixed32p32 tmpSampleEndF32P32 = ((fixed32p32)(region->end)) << 32;
fixed32p32 tmpLoopStartF32P32 = ((fixed32p32)(tmpLoopStart + 1)) << 32;
fixed32p32 tmpLoopEndF32P32 = ((fixed32p32)(tmpLoopEnd + 1)) << 32; fixed32p32 tmpLoopEndF32P32 = ((fixed32p32)(tmpLoopEnd + 1)) << 32;
fixed32p32 tmpSourceSamplePositionF32P32 = v->sourceSamplePositionF32P32; fixed32p32 tmpSourceSamplePositionF32P32 = v->sourceSamplePositionF32P32;
struct tsf_voice_lowpass tmpLowpass = v->lowpass; struct tsf_voice_lowpass tmpLowpass = v->lowpass;
@@ -1513,7 +1524,7 @@ static void tsf_voice_render_fast(tsf* f, struct tsf_voice* v, short* outputBuff
// Next sample. // Next sample.
tmpSourceSamplePositionF32P32 += pitchRatioF32P32; tmpSourceSamplePositionF32P32 += pitchRatioF32P32;
if (tmpSourceSamplePositionF32P32 >= tmpLoopEndF32P32 && isLooping) if (tmpSourceSamplePositionF32P32 >= tmpLoopEndF32P32 && isLooping)
tmpSourceSamplePositionF32P32 -= (tmpLoopEndF32P32 - tmpLoopStart + (1LL<<32)); tmpSourceSamplePositionF32P32 -= (tmpLoopEndF32P32 - tmpLoopStartF32P32 + (1LL<<32));
} }
if (tmpSourceSamplePositionF32P32 >= tmpSampleEndF32P32 || v->ampenv.segment == TSF_SEGMENT_DONE) if (tmpSourceSamplePositionF32P32 >= tmpSampleEndF32P32 || v->ampenv.segment == TSF_SEGMENT_DONE)
@@ -2144,3 +2155,5 @@ TSFDEF float tsf_channel_get_tuning(tsf* f, int channel)
#endif #endif
#endif //TSF_IMPLEMENTATION #endif //TSF_IMPLEMENTATION
#endif // ! ESP32
+2 -2
View File
@@ -1481,7 +1481,7 @@ static int op_open_seekable2(OggOpusFile *_of){
/*Clear out the current logical bitstream decoder.*/ /*Clear out the current logical bitstream decoder.*/
static void op_decode_clear(OggOpusFile *_of){ static void op_decode_clear(OggOpusFile *_of){
/*We don't actually free the decoder. /*We don't actually free the decoder.
We might be able to re-use it for the next link.*/ We might be able to reuse it for the next link.*/
_of->op_count=0; _of->op_count=0;
_of->od_buffer_size=0; _of->od_buffer_size=0;
_of->prev_packet_gp=-1; _of->prev_packet_gp=-1;
@@ -1749,7 +1749,7 @@ opus_int64 op_raw_total(const OggOpusFile *_of,int _li){
ogg_int64_t op_pcm_total(const OggOpusFile *_of,int _li){ ogg_int64_t op_pcm_total(const OggOpusFile *_of,int _li){
OggOpusLink *links; OggOpusLink *links;
ogg_int64_t pcm_total; ogg_int64_t pcm_total;
ogg_int64_t diff; ogg_int64_t diff = 0;
int nlinks; int nlinks;
nlinks=_of->nlinks; nlinks=_of->nlinks;
if(OP_UNLIKELY(_of->ready_state<OP_OPENED) if(OP_UNLIKELY(_of->ready_state<OP_OPENED)
+37 -21
View File
@@ -70,23 +70,13 @@ function install_esp32()
local ide_path=$1 local ide_path=$1
pip install pyserial pip install pyserial
pip3 install pyserial pip3 install pyserial
cd $ide_path/hardware mkdir -p ~/bin
mkdir espressif pushd ~/bin
cd espressif wget -q https://downloads.arduino.cc/arduino-cli/arduino-cli_latest_Linux_64bit.tar.gz
git clone https://github.com/espressif/arduino-esp32.git esp32 tar xvf arduino-cli_latest_Linux_64bit.tar.gz
pushd esp32 export PATH=$PATH:$PWD
# Set custom warnings for all builds
echo "compiler.c.extra_flags=-Wall -Wextra -Werror $debug_flags" > platform.local.txt
echo "compiler.cpp.extra_flags=-Wall -Wextra -Werror $debug_flags" >> platform.local.txt
echo -e "\n----platform.local.txt----"
cat platform.local.txt
git submodule update --init
cd tools
python3 get.py
export PATH="$ide_path/hardware/espressif/esp32/tools/xtensa-esp32-elf/bin/:$PATH"
popd popd
cd esp32 arduino-cli core install --additional-urls https://espressif.github.io/arduino-esp32/package_esp32_index.json esp32:esp32
} }
function install_arduino() function install_arduino()
@@ -99,6 +89,20 @@ function install_arduino()
install_libraries install_libraries
} }
function skip_esp32()
{
local ino=$1
local skiplist=""
# Add items to the following list with "\n" netween them to skip running. No spaces, tabs, etc. allowed
read -d '' skiplist << EOL || true
/MixerSample/
EOL
echo $ino | grep -q -F "$skiplist"
echo $(( 1 - $? ))
}
if [ "$BUILD_MOD" == "" ]; then if [ "$BUILD_MOD" == "" ]; then
export BUILD_MOD=1 export BUILD_MOD=1
export BUILD_REM=0 export BUILD_REM=0
@@ -109,14 +113,26 @@ if [ "$BUILD_TYPE" = "build" ]; then
install_arduino install_arduino
install_esp8266 "$HOME/arduino_ide" install_esp8266 "$HOME/arduino_ide"
source "$HOME/arduino_ide/hardware/esp8266com/esp8266/tests/common.sh" source "$HOME/arduino_ide/hardware/esp8266com/esp8266/tests/common.sh"
build_sketches "$HOME/arduino_ide" "$TRAVIS_BUILD_DIR" "-l $HOME/Arduino/libraries" "$BUILD_MOD" "$BUILD_REM" "lm2f" export ESP8266_ARDUINO_SKETCHES=$(find $HOME/Arduino/libraries/ESP8266Audio -name *.ino | sort)
# ESP8266 scripts now expect tools in wrong spot. Use simple and dumb fix
mkdir -p "$HOME/work/ESP8266Audio/ESP8266Audio"
ln -s "$HOME/arduino_ide/hardware/esp8266com/esp8266/tools" "$HOME/work/ESP8266Audio/ESP8266Audio/tools"
build_sketches "$TRAVIS_BUILD_DIR" "$HOME/arduino_ide" "$HOME/arduino_ide/hardware" "$HOME/Arduino/libraries" "$BUILD_MOD" "$BUILD_REM" "lm2f"
elif [ "$BUILD_TYPE" = "build_esp32" ]; then elif [ "$BUILD_TYPE" = "build_esp32" ]; then
install_arduino install_arduino
install_esp32 "$HOME/arduino_ide" install_esp32 "$HOME/arduino_ide"
export FQBN="espressif:esp32:esp32:PSRAM=enabled,PartitionScheme=huge_app" export testcnt=0
mkdir -p "$GITHUB_WORKSPACE/hardware" for i in $(find ~/Arduino/libraries/ESP8266Audio -name "*.ino"); do
ln -s "$GITHUB_WORKSPACE/../" "$GITHUB_WORKSPACE/libraries" testcnt=$(( ($testcnt + 1) % $BUILD_MOD ))
source "$HOME/arduino_ide/hardware/espressif/esp32/.github/scripts/sketch_utils.sh" chunk_build "$HOME/arduino_ide" "$GITHUB_WORKSPACE" "$FQBN" esp32 "$GITHUB_WORKSPACE" $BUILD_REM $BUILD_MOD if [ $testcnt -ne $BUILD_REM ]; then
continue # Not ours to do
fi
if [[ $(skip_esp32 $i) = 1 ]]; then
echo -e "\n ------------ Skipping $i ------------ \n";
continue
fi
arduino-cli compile --fqbn esp32:esp32:esp32 --warnings all $i
done
elif [ "$BUILD_TYPE" = "build_rp2040" ]; then elif [ "$BUILD_TYPE" = "build_rp2040" ]; then
install_arduino install_arduino
install_rp2040 "$HOME/arduino_ide" install_rp2040 "$HOME/arduino_ide"