From 62463b15f775c11f2083e939eb30a58d8966d8b0 Mon Sep 17 00:00:00 2001 From: Oderik Date: Thu, 4 Nov 2021 18:29:02 +0100 Subject: [PATCH] Document ESP8266 I2S pinout (#439) --- README.md | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index 8b36ac1..6ff31be 100644 --- a/README.md +++ b/README.md @@ -158,7 +158,15 @@ AudioOutputSPIFFSWAV: Writes a binary WAV format with headers to a SPIFFS files AudioOutputNull: Just dumps samples to /dev/null. Used for speed testing as it doesn't artificially limit the AudioGenerator output speed since there are no buffers to fill/drain. ## I2S DACs -I've used both the Adafruit [I2S +3W amp DAC](https://www.adafruit.com/product/3006) and a generic PCM5102 based DAC with success. The biggest problems I've seen from users involve pinouts from the ESP8266 for GPIO and hooking up all necessary pins on the DAC board. +I've used both the Adafruit [I2S +3W amp DAC](https://www.adafruit.com/product/3006) and a generic PCM5102 based DAC with success. The biggest problems I've seen from users involve pinouts from the ESP8266 for GPIO and hooking up all necessary pins on the DAC board. The essential pins are: + +I2S pin | Common label* | ESP8266 pin +--------|---------------|------------- +LRC | D4 | GPIO2 +BCLK | D8 | GPIO15 +DIN | RX | GPIO3 + +\* The "common label" column applies to common NodeMCU and D1 Mini development boards. Unfortunately some manufacturers use different mappings so the labels listed here might not apply to your particular model. ### Adafruit I2S DAC This is quite simple and only needs the GND, VIN, LRC, BCLK< and DIN pins to be wired. Be sure to use +5V on the VIN to get the loudest sound. See the [Adafruit example page](https://learn.adafruit.com/adafruit-max98357-i2s-class-d-mono-amp) for more info.