1 parent
0c4c9e1637
commit
299db3d03d
2 files changed
+166
-114
No files matched your search
+160
-114
@@ -35,113 +35,77 @@ AudioOutputI2S::AudioOutputI2S(int port, int output_mode, int dma_buf_count, int
|
||||
output_mode = EXTERNAL_I2S;
|
||||
}
|
||||
this->output_mode = output_mode;
|
||||
#ifdef ESP32
|
||||
if (!i2sOn) {
|
||||
if (use_apll == APLL_AUTO) {
|
||||
// don't use audio pll on buggy rev0 chips
|
||||
use_apll = APLL_DISABLE;
|
||||
esp_chip_info_t out_info;
|
||||
esp_chip_info(&out_info);
|
||||
if(out_info.revision > 0) {
|
||||
use_apll = APLL_ENABLE;
|
||||
}
|
||||
}
|
||||
this->use_apll = use_apll;
|
||||
|
||||
i2s_mode_t mode = (i2s_mode_t)(I2S_MODE_MASTER | I2S_MODE_TX);
|
||||
if (output_mode == INTERNAL_DAC) {
|
||||
mode = (i2s_mode_t)(mode | I2S_MODE_DAC_BUILT_IN);
|
||||
} else if (output_mode == INTERNAL_PDM) {
|
||||
mode = (i2s_mode_t)(mode | I2S_MODE_PDM);
|
||||
}
|
||||
|
||||
i2s_comm_format_t comm_fmt = (i2s_comm_format_t)(I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB);
|
||||
if (output_mode == INTERNAL_DAC) {
|
||||
comm_fmt = (i2s_comm_format_t)I2S_COMM_FORMAT_I2S_MSB;
|
||||
}
|
||||
|
||||
i2s_config_t i2s_config_dac = {
|
||||
.mode = mode,
|
||||
.sample_rate = 44100,
|
||||
.bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
|
||||
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
||||
.communication_format = comm_fmt,
|
||||
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1, // lowest interrupt priority
|
||||
.dma_buf_count = dma_buf_count,
|
||||
.dma_buf_len = 64,
|
||||
.use_apll = use_apll // Use audio PLL
|
||||
};
|
||||
audioLogger->printf("+%d %p\n", portNo, &i2s_config_dac);
|
||||
if (i2s_driver_install((i2s_port_t)portNo, &i2s_config_dac, 0, NULL) != ESP_OK) {
|
||||
audioLogger->println("ERROR: Unable to install I2S drives\n");
|
||||
}
|
||||
if (output_mode == INTERNAL_DAC || output_mode == INTERNAL_PDM) {
|
||||
i2s_set_pin((i2s_port_t)portNo, NULL);
|
||||
i2s_set_dac_mode(I2S_DAC_CHANNEL_BOTH_EN);
|
||||
} else {
|
||||
SetPinout(26, 25, 22);
|
||||
}
|
||||
i2s_zero_dma_buffer((i2s_port_t)portNo);
|
||||
}
|
||||
#else
|
||||
(void) dma_buf_count;
|
||||
(void) use_apll;
|
||||
if (!i2sOn) {
|
||||
orig_bck = READ_PERI_REG(PERIPHS_IO_MUX_MTDO_U);
|
||||
orig_ws = READ_PERI_REG(PERIPHS_IO_MUX_GPIO2_U);
|
||||
i2s_begin();
|
||||
}
|
||||
#endif
|
||||
i2sOn = true;
|
||||
//set defaults
|
||||
mono = false;
|
||||
bps = 16;
|
||||
channels = 2;
|
||||
hertz = 44100;
|
||||
bclkPin = 26;
|
||||
wclkPin = 25;
|
||||
doutPin = 22;
|
||||
SetGain(1.0);
|
||||
SetRate(44100); // Default
|
||||
}
|
||||
|
||||
AudioOutputI2S::~AudioOutputI2S()
|
||||
{
|
||||
#ifdef ESP32
|
||||
if (i2sOn) {
|
||||
audioLogger->printf("UNINSTALL I2S\n");
|
||||
i2s_driver_uninstall((i2s_port_t)portNo); //stop & destroy i2s driver
|
||||
}
|
||||
#else
|
||||
if (i2sOn) i2s_end();
|
||||
#endif
|
||||
#ifdef ESP32
|
||||
if (i2sOn) {
|
||||
audioLogger->printf("UNINSTALL I2S\n");
|
||||
i2s_driver_uninstall((i2s_port_t)portNo); //stop & destroy i2s driver
|
||||
}
|
||||
#else
|
||||
if (i2sOn)
|
||||
i2s_end();
|
||||
#endif
|
||||
i2sOn = false;
|
||||
}
|
||||
|
||||
bool AudioOutputI2S::SetPinout(int bclk, int wclk, int dout)
|
||||
{
|
||||
#ifdef ESP32
|
||||
if (output_mode == INTERNAL_DAC || output_mode == INTERNAL_PDM) return false; // Not allowed
|
||||
bclkPin = bclk;
|
||||
wclkPin = wclk;
|
||||
doutPin = dout;
|
||||
if (i2sOn)
|
||||
return SetPinout();
|
||||
|
||||
i2s_pin_config_t pins = {
|
||||
.bck_io_num = bclk,
|
||||
.ws_io_num = wclk,
|
||||
.data_out_num = dout,
|
||||
.data_in_num = I2S_PIN_NO_CHANGE
|
||||
};
|
||||
i2s_set_pin((i2s_port_t)portNo, &pins);
|
||||
return true;
|
||||
#else
|
||||
(void) bclk;
|
||||
(void) wclk;
|
||||
(void) dout;
|
||||
return false;
|
||||
#endif
|
||||
}
|
||||
|
||||
bool AudioOutputI2S::SetPinout()
|
||||
{
|
||||
#ifdef ESP32
|
||||
if (output_mode == INTERNAL_DAC || output_mode == INTERNAL_PDM)
|
||||
return false; // Not allowed
|
||||
|
||||
i2s_pin_config_t pins = {
|
||||
.bck_io_num = bclkPin,
|
||||
.ws_io_num = wclkPin,
|
||||
.data_out_num = doutPin,
|
||||
.data_in_num = I2S_PIN_NO_CHANGE};
|
||||
i2s_set_pin((i2s_port_t)portNo, &pins);
|
||||
return true;
|
||||
#else
|
||||
(void)bclkPin;
|
||||
(void)wclkPin;
|
||||
(void)doutPin;
|
||||
return false;
|
||||
#endif
|
||||
}
|
||||
|
||||
bool AudioOutputI2S::SetRate(int hz)
|
||||
{
|
||||
// TODO - have a list of allowable rates from constructor, check them
|
||||
this->hertz = hz;
|
||||
#ifdef ESP32
|
||||
i2s_set_sample_rates((i2s_port_t)portNo, AdjustI2SRate(hz));
|
||||
#else
|
||||
i2s_set_rate(AdjustI2SRate(hz));
|
||||
#endif
|
||||
if (i2sOn)
|
||||
{
|
||||
#ifdef ESP32
|
||||
i2s_set_sample_rates((i2s_port_t)portNo, AdjustI2SRate(hz));
|
||||
#else
|
||||
i2s_set_rate(AdjustI2SRate(hz));
|
||||
#endif
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
@@ -167,11 +131,86 @@ bool AudioOutputI2S::SetOutputModeMono(bool mono)
|
||||
|
||||
bool AudioOutputI2S::begin()
|
||||
{
|
||||
#ifdef ESP32
|
||||
if (!i2sOn)
|
||||
{
|
||||
if (use_apll == APLL_AUTO)
|
||||
{
|
||||
// don't use audio pll on buggy rev0 chips
|
||||
use_apll = APLL_DISABLE;
|
||||
esp_chip_info_t out_info;
|
||||
esp_chip_info(&out_info);
|
||||
if (out_info.revision > 0)
|
||||
{
|
||||
use_apll = APLL_ENABLE;
|
||||
}
|
||||
}
|
||||
|
||||
i2s_mode_t mode = (i2s_mode_t)(I2S_MODE_MASTER | I2S_MODE_TX);
|
||||
if (output_mode == INTERNAL_DAC)
|
||||
{
|
||||
mode = (i2s_mode_t)(mode | I2S_MODE_DAC_BUILT_IN);
|
||||
}
|
||||
else if (output_mode == INTERNAL_PDM)
|
||||
{
|
||||
mode = (i2s_mode_t)(mode | I2S_MODE_PDM);
|
||||
}
|
||||
|
||||
i2s_comm_format_t comm_fmt = (i2s_comm_format_t)(I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB);
|
||||
if (output_mode == INTERNAL_DAC)
|
||||
{
|
||||
comm_fmt = (i2s_comm_format_t)I2S_COMM_FORMAT_I2S_MSB;
|
||||
}
|
||||
|
||||
i2s_config_t i2s_config_dac = {
|
||||
.mode = mode,
|
||||
.sample_rate = 44100,
|
||||
.bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
|
||||
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
||||
.communication_format = comm_fmt,
|
||||
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1, // lowest interrupt priority
|
||||
.dma_buf_count = dma_buf_count,
|
||||
.dma_buf_len = 64,
|
||||
.use_apll = use_apll // Use audio PLL
|
||||
};
|
||||
audioLogger->printf("+%d %p\n", portNo, &i2s_config_dac);
|
||||
if (i2s_driver_install((i2s_port_t)portNo, &i2s_config_dac, 0, NULL) != ESP_OK)
|
||||
{
|
||||
audioLogger->println("ERROR: Unable to install I2S drives\n");
|
||||
}
|
||||
if (output_mode == INTERNAL_DAC || output_mode == INTERNAL_PDM)
|
||||
{
|
||||
i2s_set_pin((i2s_port_t)portNo, NULL);
|
||||
i2s_set_dac_mode(I2S_DAC_CHANNEL_BOTH_EN);
|
||||
}
|
||||
else
|
||||
{
|
||||
SetPinout();
|
||||
}
|
||||
i2s_zero_dma_buffer((i2s_port_t)portNo);
|
||||
}
|
||||
#else
|
||||
(void)dma_buf_count;
|
||||
(void)use_apll;
|
||||
if (!i2sOn)
|
||||
{
|
||||
orig_bck = READ_PERI_REG(PERIPHS_IO_MUX_MTDO_U);
|
||||
orig_ws = READ_PERI_REG(PERIPHS_IO_MUX_GPIO2_U);
|
||||
i2s_begin();
|
||||
}
|
||||
#endif
|
||||
i2sOn = true;
|
||||
SetRate(hertz); // Default
|
||||
return true;
|
||||
}
|
||||
|
||||
bool AudioOutputI2S::ConsumeSample(int16_t sample[2])
|
||||
{
|
||||
|
||||
//return if we haven't called ::begin yet
|
||||
if (!i2sOn)
|
||||
return false;
|
||||
|
||||
int16_t ms[2];
|
||||
|
||||
ms[0] = sample[0];
|
||||
@@ -183,41 +222,48 @@ bool AudioOutputI2S::ConsumeSample(int16_t sample[2])
|
||||
int32_t ttl = ms[LEFTCHANNEL] + ms[RIGHTCHANNEL];
|
||||
ms[LEFTCHANNEL] = ms[RIGHTCHANNEL] = (ttl>>1) & 0xffff;
|
||||
}
|
||||
#ifdef ESP32
|
||||
uint32_t s32;
|
||||
if (output_mode == INTERNAL_DAC) {
|
||||
int16_t l = Amplify(ms[LEFTCHANNEL]) + 0x8000;
|
||||
int16_t r = Amplify(ms[RIGHTCHANNEL]) + 0x8000;
|
||||
s32 = (r<<16) | (l&0xffff);
|
||||
} else {
|
||||
s32 = ((Amplify(ms[RIGHTCHANNEL]))<<16) | (Amplify(ms[LEFTCHANNEL]) & 0xffff);
|
||||
}
|
||||
return i2s_write_bytes((i2s_port_t)portNo, (const char*)&s32, sizeof(uint32_t), 0);
|
||||
#else
|
||||
uint32_t s32 = ((Amplify(ms[RIGHTCHANNEL]))<<16) | (Amplify(ms[LEFTCHANNEL]) & 0xffff);
|
||||
return i2s_write_sample_nb(s32); // If we can't store it, return false. OTW true
|
||||
#endif
|
||||
#ifdef ESP32
|
||||
uint32_t s32;
|
||||
if (output_mode == INTERNAL_DAC)
|
||||
{
|
||||
int16_t l = Amplify(ms[LEFTCHANNEL]) + 0x8000;
|
||||
int16_t r = Amplify(ms[RIGHTCHANNEL]) + 0x8000;
|
||||
s32 = (r << 16) | (l & 0xffff);
|
||||
}
|
||||
else
|
||||
{
|
||||
s32 = ((Amplify(ms[RIGHTCHANNEL])) << 16) | (Amplify(ms[LEFTCHANNEL]) & 0xffff);
|
||||
}
|
||||
return i2s_write_bytes((i2s_port_t)portNo, (const char *)&s32, sizeof(uint32_t), 0);
|
||||
#else
|
||||
uint32_t s32 = ((Amplify(ms[RIGHTCHANNEL])) << 16) | (Amplify(ms[LEFTCHANNEL]) & 0xffff);
|
||||
return i2s_write_sample_nb(s32); // If we can't store it, return false. OTW true
|
||||
#endif
|
||||
}
|
||||
|
||||
void AudioOutputI2S::flush() {
|
||||
#ifdef ESP32
|
||||
// makes sure that all stored DMA samples are consumed / played
|
||||
int buffersize = 64 * this->dma_buf_count;
|
||||
int16_t samples[2] = {0x0,0x0};
|
||||
for (int i=0;i<buffersize; i++) {
|
||||
while (!ConsumeSample(samples)) {
|
||||
delay(10);
|
||||
void AudioOutputI2S::flush()
|
||||
{
|
||||
#ifdef ESP32
|
||||
// makes sure that all stored DMA samples are consumed / played
|
||||
int buffersize = 64 * this->dma_buf_count;
|
||||
int16_t samples[2] = {0x0, 0x0};
|
||||
for (int i = 0; i < buffersize; i++)
|
||||
{
|
||||
while (!ConsumeSample(samples))
|
||||
{
|
||||
delay(10);
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
|
||||
bool AudioOutputI2S::stop()
|
||||
{
|
||||
#ifdef ESP32
|
||||
i2s_zero_dma_buffer((i2s_port_t)portNo);
|
||||
#endif
|
||||
if (!i2sOn)
|
||||
return false;
|
||||
|
||||
#ifdef ESP32
|
||||
i2s_zero_dma_buffer((i2s_port_t)portNo);
|
||||
#endif
|
||||
return true;
|
||||
}
|
||||
|
||||
|
||||
Reference in new issue
Block a user