diff --git a/Thermostat/platformio.ini b/Thermostat/platformio.ini
index b9fb9e1..73b10c0 100644
--- a/Thermostat/platformio.ini
+++ b/Thermostat/platformio.ini
@@ -9,5 +9,4 @@ lib_deps =
   knolleary/PubSubClient
   tzapu/WiFiManager
   bblanchon/ArduinoJson
-  ESPAsyncWebServer
-  ESPAsyncTCP
+  me-no-dev/ESPAsyncWebServer
diff --git a/Thermostat/src/main.cpp b/Thermostat/src/main.cpp
index d686239..0c93c8e 100644
--- a/Thermostat/src/main.cpp
+++ b/Thermostat/src/main.cpp
@@ -18,47 +18,50 @@ float currentTemp = 0.0;
  */
 void setup() {
     Serial.begin(115200);
+    delay(10000);
     // Retrieve config from EEPROM, connect to WiFi and MQTT, and set up thermostat presets
-    load_config();
+    // load_config();
     // Debug: print current config and actions
-    Serial.println("--- Thermostat Unit Startup ---");
-    Serial.print("WiFi SSID: "); Serial.println(wifi_ssid);
-    Serial.print("MQTT Server: "); Serial.println(mqtt_server);
-    Serial.print("MQTT Port: "); Serial.println(mqtt_port);
-    Serial.print("MQTT User: "); Serial.println(mqtt_user);
-    Serial.print("MQTT Device ID: "); Serial.println(mqtt_device_id);
-    Serial.print("MQTT Temp Topic: "); Serial.println(mqtt_temp_topic);
-    Serial.print("Temp Sensor ID: "); Serial.println(temp_sensor_id);
-    Serial.print("Preset Confort: "); Serial.println(preset_confort);
-    Serial.print("Preset Eco: "); Serial.println(preset_eco);
-    Serial.print("Preset Boost: "); Serial.println(preset_boost);
-    Serial.print("Preset Hors Gel: "); Serial.println(preset_hors_gel);
+    Serial.println("Thermostat Unit Startup - Version 1.0");
+    // Serial.print("WiFi SSID: "); Serial.println(wifi_ssid);
+    // Serial.print("MQTT Server: "); Serial.println(mqtt_server);
+    // Serial.print("MQTT Port: "); Serial.println(mqtt_port);
+    // Serial.print("MQTT User: "); Serial.println(mqtt_user);
+    // Serial.print("MQTT Device ID: "); Serial.println(mqtt_device_id);
+    // Serial.print("MQTT Temp Topic: "); Serial.println(mqtt_temp_topic);
+    // Serial.print("Temp Sensor ID: "); Serial.println(temp_sensor_id);
+    // Serial.print("Preset Confort: "); Serial.println(preset_confort);
+    // Serial.print("Preset Eco: "); Serial.println(preset_eco);
+    // Serial.print("Preset Boost: "); Serial.println(preset_boost);
+    // Serial.print("Preset Hors Gel: "); Serial.println(preset_hors_gel);
 
     Serial.println("Connecting to WiFi...");
+    delay(5000);
     // setup wifi and mqtt, and load presets into thermostat
-    setup_web_config();
+    // setup_web_config();
     WiFi.begin(wifi_ssid.c_str(), wifi_pass.c_str());
-    Serial.println("Connecting to MQTT...");
-    mqttClient.setServer(mqtt_server.c_str(), mqtt_port);
-    setup_mqtt(mqttClient);
-    load_presets();
-    thermostat.setPresetTemp(MODE_CONFORT, preset_confort);
-    thermostat.setPresetTemp(MODE_ECO, preset_eco);
-    thermostat.setPresetTemp(MODE_BOOST, preset_boost);
-    thermostat.setPresetTemp(MODE_HORS_GEL, preset_hors_gel);
-    // Retreive current temp from MQTT (if available) and set initial mode to lastvalue (stored in EEPROM) or MODE_OFF if not available
-    thermostat.setMode(MODE_OFF);
+    // Serial.println("Connecting to MQTT...");
+    // mqttClient.setServer(mqtt_server.c_str(), mqtt_port);
+    // setup_mqtt(mqttClient);
+    // load_presets();
+    // thermostat.setPresetTemp(MODE_CONFORT, preset_confort);
+    // thermostat.setPresetTemp(MODE_ECO, preset_eco);
+    // thermostat.setPresetTemp(MODE_BOOST, preset_boost);
+    // thermostat.setPresetTemp(MODE_HORS_GEL, preset_hors_gel);
+    // // Retreive current temp from MQTT (if available) and set initial mode to lastvalue (stored in EEPROM) or MODE_OFF if not available
+    // thermostat.setMode(MODE_OFF);
 }
 
 void loop() {
-    handle_web_config();
-    // Ask Mqtt to process incoming messages and maintain connection
-    mqtt_loop(mqttClient);
-    // Update thermostat state based on current temp and publish state to MQTT
-    thermostat.update(currentTemp);
-    // Publish state to MQTT every second (or on state change, if you want to optimize)
-    mqtt_publish_state(mqttClient, thermostat.getMode(), thermostat.getTargetTemp(), thermostat.isHeating());
-    // Delay to avoid flooding MQTT with messages. Adjust as needed for your use case (e.g., publish on state change 
-    // instead of every loop).
-    delay(1000);
+    Serial.println("Entering main loop...");
+    // handle_web_config();
+    // // Ask Mqtt to process incoming messages and maintain connection
+    // mqtt_loop(mqttClient);
+    // // Update thermostat state based on current temp and publish state to MQTT
+    // thermostat.update(currentTemp);
+    // // Publish state to MQTT every second (or on state change, if you want to optimize)
+    // mqtt_publish_state(mqttClient, thermostat.getMode(), thermostat.getTargetTemp(), thermostat.isHeating());
+    // // Delay to avoid flooding MQTT with messages. Adjust as needed for your use case (e.g., publish on state change 
+    // // instead of every loop).
+    delay(5000);
 }