easylinux/DCC_LokDecoder
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Gyuri
2021-02-16 22:35:39 +01:00
committed by GitHub
parent f02d4ad76b
commit bc2bda4f30
1 changed files with 32 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files
README.md
+32 -1
View File
@@ -35,7 +35,38 @@ DCC multifunction decoder for H0 locomotives
## Install guide ## Install guide
reset to factory 1. Get the PCB (e.g. [JLCPCB](https://jlcpcb.com/)) and the components (e.g. [mouser](https://www.mouser.at/), [digikey](https://www.digikey.at/))
2. Solder the components. The SOIC with exposed pad is a bit tricky, it can be soldered from the other side with a big tip and a lot of flux.
3. Install the Arduino bootloader using the pads 5V, GND, SCK, MISO, MOSI, RST and an Arduino. [Arduino as ISP](https://www.arduino.cc/en/Tutorial/BuiltInExamples/ArduinoISP)
4. Uncomment the line `#define RESET_FACTORY_DEFAULTS` to fill the EEPROM with the default CV values
5. Upload the code using the pads 5V, GND, RX, TX, DTR and a USB TTL UART cable [like this](https://www.mouser.at/ProductDetail/FTDI/TTL-232R-5V-WE/?qs=OMDV80DKjRpCUAS6UR9QpQ%3D%3D)
6. Re-comment the line `#define RESET_FACTORY_DEFAULTS` to avoid resetting to factory defaults every time.
7. Upload the code again.
8. Add the decoder XML file to JMRI. In DecoderPro select "File-> Import Decoder File..." and browse to the decoder [XML](JMRI_decoder_file/Public_Domain_GTI_green.xml). It will take some time, then adds the decoder definition to the database.
9. Connect the T1 and T2 pads to the programming track of your DCC system.
10. Add new locomotive with the "New Loco" button and then "Read type from decoder". It should detect the correct type:
![add](JMRI_decoder_file/add.jpg)
11. If everything is fine, you can install the decoder into your locomotive!
### Pinout
| Pad | Function |
| :-- | :-- |
| M1 | Motor 1 |
| M2 | Motor 2 |
| T1 | Track 1 |
| T2 | Track 2 |
| V+ | Positive common for function outputs (keep-alive capacitor positive) |
| F0f | F0 function output forward (open drain) |
| F0r | F0 function output reverse (open drain) |
| AUXn | AUX function output n (open drain) |
| 5V | internal microcontroller +5V supply |
| GND | ground (keep alive capacitor negative) |
| SCK | ISP programming clock (connect to ISP SCK) |
| MISO | ISP programming read (connect to ISP MISO) |
| MOSI | ISP programming write (connect to ISP MOSI) |
| RST | ISP programming reset (connect to ISP reset output)
| RX | serial programming receive (connect to TTL UART TX) |
| TX | serial programming transmit (connect to TTL UART RX) |
| DTR | serial programming reset through a 100 nF capacitor (connect to TTL UART DTR) |
## Todo list ## Todo list
- [ ] CV15, CV16 decoder locking - [ ] CV15, CV16 decoder locking