diff --git a/README.md b/README.md index a555bb5..10ac66b 100644 --- a/README.md +++ b/README.md @@ -52,6 +52,7 @@ A lot of the contents have been deciphered, but the more data we have, the easie ## Requirements +- Basic command line knowledge - A computer running macOS or Linux, or a Windows computer with a WSL installation - Python 3.6 or higher - Bambu Lab Filament spool **or** the related tags diff --git a/docs/WriteTags.md b/docs/WriteTags.md index ac9b931..6b18985 100644 --- a/docs/WriteTags.md +++ b/docs/WriteTags.md @@ -3,8 +3,12 @@ This document serves as a guide for copying tag dumps onto new tags. This guide is written for the Proxmark3, however this may also be performed with other devices like the Flipper Zero. +> [!WARNING] +> This guide comes with **ABSOLUTELY NO WARRANTY.** Proceed at your own risk! + # Table of contents + * [Requirements](#requirements) * [Compatible RFID tags - By generation](#compatible-rfid-tags---by-generation) * [Identifying Tag Type](#identifying-tag-type) * [Gen 2](#gen-2) @@ -14,6 +18,10 @@ This guide is written for the Proxmark3, however this may also be performed with * [Seal UFUID](#seal-ufuid) +## Requirements + +Please view the [Requirements section of the README](../README.md#requirements). + ## Compatible RFID tags - By generation There are tags known as "Magic Tags" which allow functionality that is not part of the classic MIFARE spec. One example is that most Magic Tags allow the UID to be changed, which is normally read-only on MIFARE tags. Magic tags are often referred to by their "generation", for example "Magic Gen 1", but some online sellers will use alternate names in their listings (denoted in parenthesis in the list below). Each newer generation increases the functionality, but tends to also be more expensive.